Water pipe hot tapping DN150 using TONISCO B30

[@arlarios79]

You will not have any issues with the tapping sleeve ,or the gate valve, or any of the valve assembly (yes including bolts and gasgets) in your lifetime. You'll have an issue with the water main that they used to tap before any of that new installation fails. Don't lose any sleep over it🖒

[@floringhita4072]

Artă și meserie bravo

[@Braavoo__]

Nice 👍

[@shawntyler4813]

Good vid, except you need to tighten the bolts in a cross/alternating pattern. Per OEM specs and industry standard.

[@paulanthony873]

could this be carried out on live oil or gasoline pipelines

[@Bolensgoldrush]

@@paulanthony873 Almost certainly not, but I can't verify.

[@chrislang331]

Yes. @@paulanthony873

[@wuenceslaoippolito8408]

YES YES IN PUERTO RICO #867 YUNIT HOT TAPPING WATER MAIN FOR DE ORACAN IS 99% SECURYTY NO PROBLEMA IS #1

[@wilfredosilvacanales4373]

ME GUSTARIA CONOCER MAS DE ESTE SISTEMA EN DIAMETROS MAS GRANDES Y APLICARLO EN OBRAS EN CHILE.

[@muzafferbasibuyuk1203]

Why Don't you weld a sleeve with a flange to the pipe anda then connect valve and the drill. That piece can lose its function as seal overtime

[@piperepairclampspipetappin8384]

Nice

[@wuenceslaoippolito8408]

#1 %99 SECURYTY 👍👍👍👍👍👍👍👍👍

[@TheRealFOSFOR]

Mitä helvettiä? Suomalainen video =D. En alussa huomannu. "Istutsää paskalla?! " hahaha .. perus työmaa xD

[@juanketi5939]

donde vende ese equipo

[@Xn--72cf8bvb1ec7m]

good

[@gregorioramos4778]

You forgot to flush the line.