Feed Tap™ Drilling Machine Demo - Reed Manufacturing
HTML-код
- Опубликовано: 9 июн 2024
- REED’s Feed Tap™ Drilling Machine is a great waterworks tool that drills through PVC, PE, cast iron, and ductile iron pipes, while under pressure using a corporation stop inserted into a service saddle. Browse all options: www.reedmfgco.com/en/products....
The compact design of this Feed Tap Drilling Machine, with a separate, independent feed control for advancing the heavy-duty shell cutter into the pipe, allows the user to easily complete the tap using a drill (not included) for cast and ductile iron, or manual power (7/16” wrench) for PVC/PE and other plastic pipe. The independent feed control advances the shell cutter for tapping PVC pipe as recommended by Uni-Bell PVC Pipe Association.
FTB Feed Tap consists of the base unit which allows the user to purchase shell cutters and corporation adapters separately, as needed. A complete kit is sold as FT2000UNIV. The kit contains both a coupon retaining drill bit, CRPD25 and two sets of coupon retaining magnets. The magnets work well on ductile iron taps and the CRPD25 bit works on all types of pipe taps. The retaining method used is up to the individual operator.
Plastic Pipe only FTP200UNIV is used for manual drilling operations using Reed’ s proven PE/PVC "PL series" shell cutters. The FTP2000UNIV comes complete with all corporation adapters, shell cutters, shell cutter adapters, and a ratchet wrench with socket to cover ¾” to 2” services in PVC and PE. Each machine ships with a sturdy carrying case.
Browse all REED water service tools and machines: www.reedmfgco.com/en/products....
To learn more about REED, to browse all products, or find where to buy, visit our website: www.reedmfgco.com.
Please contact us with any questions: www.reedmfgco.com/en/contact-....
To stay up to date on our latest product demos, please subscribe to our channel.
Let’s Connect!
Facebook: / reedmanufacturing
Twitter: / reedpipetools
Instagram: / reedpipetools
Never seen a more useful magnet than this one.
Good demo,
Great vid
Awesome
Next demo, please use required PPE. It sets a good example for other users. Thanks.
Great tip! REED realizes the importance of PPE and we do stress it in our literature.
Laura Sole, what ppe would you approve of? I only ask because the application will differ between product demo and field use. It always does, and always will.
Awesome looking device, how much does a setup like this coast in 22?
Feed Tap is sold in several different set-ups. You would need to review the set-ups and check with a local distributor for a price.
Feed Tap: www.reedmfgco.com/en/products/water-services-tools-and-machines/feed-tap-drilling-machine/
Where to Buy: www.reedmfgco.com/en/where-to-buy/
Please do demo repair 🙏 The shaft is sliding all the way down and all the way back up without turning the black cylinder.
Figured it out the 1 1/2 inch tension pin broke on the top of the shaft, either way a video would be nice for anyone running into the same issue.
Thanks for the update @jruoff16. We'll share with products department.
The magnet will hold the cuttings in a lengthwise orientation that maximizes the chance of getting them embedded in the skin, meanwhile your demonstration shows someone grasping the magnet with bare skin, not covering their fingers with any PPE.
You're right - our operator in the demo should have worn close-fitting jobs. We have added PPE recommendations to our user manual.
I want taping machine
how i can buy in India?
Check in with Arizona Tools. Web: www.aztc.in
Arizona Tools Company
67-A, N. S. Road, Ground Floor
Kolkata 700 001 (WB) INDIA
Office Phone: +91 33 4001 3866
Cell: +91 98300-30618, 90380 81456
+91 95868 00967, 98300 30612
Email: info@aztc.in
skype id: shahct (www.skype.com)
How much it cost
The cost depends on the options chosen with the machine. Best is to work with a distributor in your area to determine which pieces you need. www.reedmfgco.com/en/where-to-buy/ If you have questions when you pursue it, contact us again.
What is the model of this tapping machine?
Specifically, they are showing the FT2000UNIV #09165. It is found in this tool family: www.reedmfgco.com/en/products/water-services-tools-and-machines/feed-tap-drilling-machine/
Ford brand hot tap way easier
Every user has their own preference. REED's Feed Tap is quite versatile.
Terrible machine. Cheap feeling. Take a Mueller any day..
We welcome you to get in touch with REED about your dissatisfaction. Send us a message at reedsales@reedmfgco.com. We'd like to know what caused your issue.