Great video James glad you were able to sell some truck's to make your work load smaller and more gratifying. Looking forward to your next video stay safe James.
Oh, wow! I get to be first to reply. I know you did not want to sell a bunch of your trucks, but slimming down the projects to a manageable number is going to be good for you.
Good job working on the truck again you will get it figured out and get it done brother, good job keep working hard safe travels on the airplane captain
I know I am too late for this video, but for the video where you have Miss Jessica help you put the driveshafts back in, I am thinking it would make that part of the project easier for you both, if you put the floor jack up under the heaviest end of the driveshafts to help both hold and steady the driveshafts in alignment while you put the bolts in and tighten them down. I can’t see either of you getting hurt on this (or any other) project(s) ! Take care and best wishes to you both always!
Hey James Glad you were able to sell some truck and put them back to work to help with the other projects wish I had the money I'd love to have frannie I learned to drive on one just like her love to have her and restore it for a working show truck best wishes brother take care I love watching your videos
Hi James, got a lot done today! On Krystal the air cleaners from X were the ones I meant to say I thought would be able to work on Krystal. I think those would have changeable filters. And could be mounted on the stack supports. But I’m not sure about plumbing the air piping in for 2 of them. Stay safe
Could always go with single air cleaner in the middle and a Y pipe. Used to see just a single air intake in the middle too. If it’s done nice it looks good too. Less pipe to polish too. Just a thought.
Well James you sure are a goer good you have sent some trucks off to new homes and at least the scrap yard has not got then they give you nothing for then and sell the bits for gold prices afterwards keep trucking on there safely to
Hi James hope all is well, so marmon chassis frame is longer than what it use to be because you mention stretch and drive shaft work, hope you are not planning to sell black Betty, lol.
Great video James glad you were able to sell some truck's to make your work load smaller and more gratifying. Looking forward to your next video stay safe James.
Thx Richard
Oh, wow! I get to be first to reply.
I know you did not want to sell a bunch of your trucks, but slimming down the projects to a manageable number is going to be good for you.
Good to be first!!! Ya I agree once we’re down to a manageable number the channel will be fun again
Wow James moving them out. You can focus on the trucks you really like. (Betty)
Happy to see you sold those Trucks which means you will be able to focus on restoring the few you want to keep but at the same time sad to see them go
I feel
Exactly the same way. But I want the channel to get back to being fun and finding old stuff to start up and just buy less lol
Exciting times ahead for the James Pretty channel, I'm here for it! 🍿
Yep we’re gonna get back to our roots soon
You are a good man james you work hard
Thx
Always love the videos! Best guy on RUclips!
Thx Rick
James👍👍👍
Thx for being here Raymond
That is awesome you sold some of your trucks James good video
Thx bro
Good job working on the truck again you will get it figured out and get it done brother, good job keep working hard safe travels on the airplane captain
Thx bro
Sorry to see so many youngsters gone!
5 to go Then the channel will be fun again
Good to see you sent them off to good homes James, now to get to work in Betty.
Yep that’s the plan brother
You get a triple a plus for me , james triple a plus
Thx brother
I know I am too late for this video, but for the video where you have Miss Jessica help you put the driveshafts back in, I am thinking it would make that part of the project easier for you both, if you put the floor jack up under the heaviest end of the driveshafts to help both hold and steady the driveshafts in alignment while you put the bolts in and tighten them down. I can’t see either of you getting hurt on this (or any other) project(s) ! Take care and best wishes to you both always!
Appreciate ya
Hey James Glad you were able to sell some truck and put them back to work to help with the other projects wish I had the money I'd love to have frannie I learned to drive on one just like her love to have her and restore it for a working show truck best wishes brother take care I love watching your videos
Appreciate ya
Hi James, got a lot done today! On Krystal the air cleaners from X were the ones I meant to say I thought would be able to work on Krystal. I think those would have changeable filters. And could be mounted on the stack supports. But I’m not sure about plumbing the air piping in for 2 of them. Stay safe
I’m still looking for air cleaners I flip flop on that often
Could always go with single air cleaner in the middle and a Y pipe. Used to see just a single air intake in the middle too. If it’s done nice it looks good too. Less pipe to polish too. Just a thought.
Real shame we'll never get to see Whitney (White) cabover refurbished and ready to show off. I was really waiting for that.
That's what I thought too. It's my favourite truck in the Pretty collection
I just don’t have enough time and money to do them all. I wish I did
@@JamesPretty Trust me I absolutely understand about being strapped for finances.
You get your new bits for the drill
We find a work around
❤ you got this!!
Thx bro
Its going to look awesome when its done
I hope so.
Yaa Dont Need No House ... ya gotta a bunch of trucks you can live in 😁 Live the Lifestyle LOL
Hahaha
Have a Lil room in the lot more room to work and move around looking good brother but ol Krystal's still my favorite 😍
Awe Krystal
Well James you sure are a goer good you have sent some trucks off to new homes and at least the scrap yard has not got then they give you nothing for then and sell the bits for gold prices afterwards keep trucking on there safely to
Thx Alan. Appreciate ya being here
Hey James. Glad you sold some trucks but I hope you keep Franny !
I want to keep Franny but if the money shows up it has to go
@@JamesPretty Understood.
Don't worry James, I know what ur thinkin
Thx bro
@@JamesPretty Ur welcome bro
Looking good be nice too see that and the white one done day will look keep it up your doing a great job 👌💯💨💨💨💨🇬🇧👍🏻
Thx bro
Hi James hope all is well, so marmon chassis frame is longer than what it use to be because you mention stretch and drive shaft work, hope you are not planning to sell black Betty, lol.
Betty is not for sale Yes 300”
Wheel base
@@JamesPretty am glad to know that, it's for sale.
You going to combine the two sleepers together.. or you just going to leave it the way it is
Undecided
@@JamesPretty it would be a job but it would look awesome
Good morning brother
Good morning bro
I love to see Black Betty all done but I know it takes time & money
We are trying to have it done in the next few months
James Pretty, mortgage rates set to rise. over here in England Uk with the cost of new deal going up by 0.45 % points on friday,.?
Ugh rates are already way to high
the tool you bought isnt a snap on whats up with that
Which one?
Good morning
Morning bro
Good morning my brother, this going to be a good day but I know u didnt like to sell everything but I know u need the space
Yep 5 more to sell then the channel will be fun again
Why you selling all yore trucks?
Too many to contend with solo
Sorry i.m late buddy
No worries Tommy. Appreciate ya being here
Where are you I live in ga
Contact me thru Facebook messenger I can’t put that info here
👍👏🥰🇨🇿😏
How’s it going brother ?
🙏🙏🙏🇺🇲🇬🇷❤️
Thx for watching
Good morning brother
Good morning brother p