upper ball joint looks like its asking for some help. At what point or at this point 2.0 lift do you need new upper control arms? before you are stranded in the desert.
I tried some Fox Coil-overs from BDS. Great for city driving but terrible for out on the trail. Now running imported Koni HT Raids at half the cost and way better!
How is the ride quality on these and does the upper control arm change the cv axel angle and how is the build quality on these holding up to salt and winter weather
What tire size can fit on my 2020 F150 Lariat FX4 without any rubbing, I will get the M-18000-F15AA kit installed. BFG KO2: 1) 285/60 R20 or 2) 285/65 R20 or 3) 295/60 R20 [using the stock rim that come with the Lariat special edition] ?? Thanks...
Yes removal of your previous leveling kit is required for these Fox Racing 2.0 Coilovers as these replace your whole strut assembly. Thanks for watching !
We installed FOX Performance Series 2.0 IPF shocks which has a great on road feeling but they are intended to provide a great off-road feel with predictive off-road handling. Each application specific shock has specific valving for that application to ensure the best performance and handling.
The front coilovers are only available for the 4wd. The rear shocks are available for 2wd trucks. FRS-985-24-029 for 0-1” lift FRS-985-24-193 for 4-6” lift
"Pay attention to your lines to make sure nothing is under tension". 5 seconds later, puts tension on the ABS and brake lines lol.
I've never seen a truck so clean underneath lol looks it came right out the factory
Can you list the torque specs?
You’re one of the few I’ve seen that leaves the brake calipers on. I figured they could stay on- clearly they can.
Thanks for watching!
Hi, can you give the list of the correct torque for the screws. Thanks
hi, can u list all the correct torques on all those screws? thank u
upper ball joint looks like its asking for some help. At what point or at this point 2.0 lift do you need new upper control arms? before you are stranded in the desert.
Good work Guys! You are well done! FOX - the Best!
What’s the torque specs for all that? You never said them out loud .
Great video and a great upgrade for any truck. Thanks for sharing!!!
Thank you!
Would be nice to have all the torque lbs for all the nuts even wheels
I tried some Fox Coil-overs from BDS. Great for city driving but terrible for out on the trail. Now running imported Koni HT Raids at half the cost and way better!
How are they on the road and off
Great video what's the size of the tires on that truck
How is the ride quality on these and does the upper control arm change the cv axel angle and how is the build quality on these holding up to salt and winter weather
how much does the 2.0 lift the car?
Wish they made these for the 2wd f150
What tire size can fit on my 2020 F150 Lariat FX4 without any rubbing, I will get the M-18000-F15AA kit installed. BFG KO2: 1) 285/60 R20 or 2) 285/65 R20 or 3) 295/60 R20 [using the stock rim that come with the Lariat special edition] ?? Thanks...
Hi Gill,
Being that kit will net you 2” of lift up front, we wouldn’t recommend going over a 33” tall tire.
That fx4 has the same rims as my stx.
I have a 2.5 front leveling kit do i hace to take it off?
Yes removal of your previous leveling kit is required for these Fox Racing 2.0 Coilovers as these replace your whole strut assembly. Thanks for watching !
Can you fit 33 inch tires, after this upgrade?
Yes - we put 275/60-20 to be specific, which is 32.9” overall.
Are these smoother off-road vs regular Fox 2.0?
We installed FOX Performance Series 2.0 IPF shocks which has a great on road feeling but they are intended to provide a great off-road feel with predictive off-road handling. Each application specific shock has specific valving for that application to ensure the best performance and handling.
does anyone know if after installing these shocks with stock uca, do the uca come in contact with the springs?
Anything over 3inch that’s when you worry about UCA impact of the strut spring
Does this work for the RWD as well?
The front coilovers are only available for the 4wd. The rear shocks are available for 2wd trucks.
FRS-985-24-029 for 0-1” lift
FRS-985-24-193 for 4-6” lift
Which Milwaukee impact are you using
Hi Cesar, www.summitracing.com/parts/mwt-2555-22
Thank you for watching!
arent the rears on upside down
Lol yes they didnt put the mud gaurds on the rear either.
Fox shocks recommends to install them that way
@@luoskrad666 +1
@@hotdoggers6016 mud guards only came with Rousch 2.0 and that is only difference for like $300 buy the guards for $30 save the 270
Doing this only make you depressed when Raptor drives by...
I guess if youre into V6 trucks
@@hotdoggers6016 And being out of $80K!
Haha not true at all
Bullsh!t that Raptor is in the shop getting fixed.