Reviewing Creality's fantastic Ender-3 V3 Plus 3D Printer
HTML-код
- Опубликовано: 8 фев 2025
- Take the high speed of CoreXZ with a massive 300 x 300mm build plate, and throw in some Klipper firmware and you have the Creality Ender-3 V3 Plus. Find out how it performs as I put it through its paces.
My custom anti-tangle device for the Ender-3 V3 Plus:
www.thingivers...
Camera mount for the Creality Nebula camera:
www.thingivers...
Purchase the Ender-3 V3 Plus here (use "Bran50" discount code to get $50 off):
shrsl.com/4nj3z
AU store (use "Bran50" discount code to get $50 off):
shrsl.com/4nj3v
CHAPTERS
00:19 Introduction
00:56 Unboxing
02:09 Assembly
04:53 Loading filament
05.45 Features
08:28 Calibration-free printing
08:55 USB Stick
09:26 First print
10:15 Creality Print software
11:43 Adding modifiers
12:14 Anti-tangle thingamabob
12:52 Benchy
13:11 First layer
13:46 Suspended hand
14:16 Batman mask
14:42 Fidget cones
14:58 Print-in-place scissor snake
15:19 ABS spiral tower
15:43 Silent mode?
16:05 All-in-one 3D printer test
16:20 Torture toaster
16:58 Summary
18:58 Cons
STL FILES
Benchy: www.thingivers...
Suspended hand: www.printables...
Batman mask: www.thingivers...
Fidget cones: www.thingivers...
Scissor snake: www.thingivers...
Spiral tower: www.thingivers...
All-in-one 3D printer test: www.thingivers...
Torture toaster: www.thingivers...
#productreview #3dprinting #creality
T-SHIRTS
Do you like my wacky t-shirts? I buy all of them from Qwertee. Use the discount code: BranchusCreations to get £1/€1/$1 off your order. Check out the range here:
bit.ly/3OrJZkT
Stirri Product range (affiliate link) includes 10% discount:
stirri.com/BRA...
If you enjoy the content and would like to support the channel, please consider becoming a Patron:
/ branchuscreations
Of if would like to make a small donation, you can do so here:
www.paypal.me/...
Tools/Products used (paid links):
HOT AIR STATION:
Quick 861DW: amzn.to/2ZjYzPH
SOLDER:
Kester 63/37 0.5mm diameter: amzn.to/3Pf6uLe
FLUX (Get 10% off with BRANCHUS discount code):
StirriASM-TF: stirri.com/pro...
SOLDER WICK:
Goot Wick 2mm: amzn.to/3YWlRvw
TWEEZERS:
Hakko CHP 3-SA: amzn.to/2NqkhPz
OTHER:
Vevor 30L Ultrasonic Cleaner (5% off on all Vevor sites code: VVMH5%OFF):
AU site: s.vevor.com/bf...
US site: s.vevor.com/bf...
EU site: s.vevor.com/bf...
-----------------------------------------------------
Component suction tool (vacuum pen): amzn.to/44xyPkm
Microscope: amzn.to/2HnSI5H
Microscope camera: amzn.to/2TdSYsZ
Budget alternative microscope: amzn.to/2PmRagt
Budget alternative hot air rework: amzn.to/3fN1ZU7
Helping hands (third hand): amzn.to/31JUhVL
Ultrasonic cleaning fluid: amzn.to/2YusoQQ
Budget alternative fume extractor: amzn.to/2HuG0oU
HEPA filters for KOTTO fume extractor: amzn.to/3Kzr3id
UV Solder mask: amzn.to/2ZnK1yu
Swann Morton curved scalpel blades: amzn.to/2oN7qNn
No. 3 Scalpel Handle: amzn.to/2ngcx85
Kapton heat resistant tape: amzn.to/2xBnTso
28 AWG enamelled magnet wire (thick): amzn.to/32cRsLf
34 AWG enamelled magnet wire (med): amzn.to/35Bx20D
40 AWG enamelled magnet wire (thin): amzn.to/2J2Aisf
Was going to buy this from amazon for 500 euros then decided to do a bit of research, found this video, followed your referral link to the official site, used the code after registering as a new customer which gave me more dicsounts, ended up paying 380 euros instead of 514. thanks man. also great video batman!!
I'm glad you found a coupon because this thing is definitely not worth that much money.
Great video! Do you think there reasons are beyond cost why Creality continues to release new bed slinger printers instead of moving entirely to Core XY? The build volume and the price of this printer are pretty appealing, but the disadvantages of Core XZ seem pretty apparent based on your review.
Creality's flagship K1 series are all CoreXY, but they are more expensive than the Ender range.
@@BranchusCreations I saw that the forthcoming K2 is 350x350x350mm which would be a huge upgrade from my current 256x256x256mm volume limit.
14:42 I'M BATMAN.. oh wait 😂
So how do you shut this printer up? It's 100% louder than the other enders.
Thanks for a nice video. Im looking into printing for some cosplay stuff. Does the printer have any required ambient room temp? Was thinking of having it in my garage for temps in there can sink down to like 5 degree celsius.
Had a Voxelab Aquilla and used Cura to slice to SD. I bought this specifically for its WiFi ability and i havent found how to do it yet. Printer is pn wifi, Im still getting used to Creality program and learning where everything is. Cant seem to find how to set up wifi printer connection. I havent found a how to video either. 😭
There are two ways to do that. The first is to check what IP address the printer is using (Settings -> Network) then visit that IP address with a web browser. From there you can upload files to the printer via a standard web interface. The other option is via Creality Print. In the main "Devices" tab you can select "Scan add' to search for and add any printers on your network. Then you just use the "LAN printing" button after slicing to send the file directly to the printer.
Do you still use this printer? If so, how do you enjoy this printer
@@BlondieHappyGuy and no issues with them at all
Question: This looks like it's a direct drive printer. If so, what's the purpose of a bowden tube? If the filament spool were mounted from the top could the bowden tube be eliminated?
My guess is they are trying to reduce the weight on the frame to minimise vibrations, but other than that, there's no reason why the filament couldn't be mounted on the top and the Bowden tube eliminated.
@@BlondieHappyGuy I have created this anti-tangle device for the side-mounted spool, and so far it's working very well: www.thingiverse.com/thing:6811687
@@BranchusCreations I never bother with those spool holders that are attached to the printer. I use an axial ball bearing style filament holder that I have designed and printed myself. It holds the spool horizontally and lets it run with much less friction, on eighteen 12mm steel bearing balls, and it also allows me to place the spool anywhere I choose, like on a shelf two feet above the printer. It can easily hold 3kg spools too.
what are the benefits of this printer over Elegoo Neptune 4 Plus?
Have you made the stl file for the awesome camera bracket you designed public?
I have now! www.thingiverse.com/thing:6838897
Question: I use Octoprint on all of my printers but because the V3 Plus doesn't use Marlin it won't be possible. I'm not opposed to that. However, one ESSENTIAL feature of Octoprint is that if I'm printing a lot of parts and one of the parts fails by not sticking to the bed I can have Octoprint ignore that part for the rest of the job. Is that possible in the software on this printer?
Yes, I believe the built-in firmware does have this feature. The web interface shows all objects printing and you can selectively cancel any of them.
Question: The space where I would put this printer isn't wide enough to include the filament spool. Can it be mounted to the top? Is there a STL file to help with that?
I've seen photos of the Ender-3 V3 Plus in this configuration, so I'm sure it can be done.
There is a set of printable modifications on Thingiverse. Just query the Ender-3 V3 Plus and you’ll find them.
I'm running windows 11 and not getting that screen flickering.
Great video.....thank you from a newbie!
cats are the biggest douchebags, but the'yre also cool.
moved away from enders after their trash v3 bambu lab A1 blows enders out the water