Char-Griller Gravity 980 LSS Fan Extension Mod
HTML-код
- Опубликовано: 31 июл 2023
- A lot of folks have been having issues with their fan flap melting because of excess heat in the ash pan. Well I haven't had this issue, however I do get charcoal debris in my fan causing an EF error and my fan won't work. I usually need to remove the fan and get the debris out. I believe with this mod that this issue will be a thing of the past. So sit back relax and watch how I installed this mod. LSS web site is listed below. Luke is a great guy and does excellent work:
#LSSMODS
#chargriller
LSS MODS
www.lss-mods.com/
Power Cord For Power Pack
amzn.to/3KojdIS Хобби
I have the LSS shelf. The material strength is a fair but the convenience of the design is awesome. Very nice for drip pans below your meat to avoid greasy clean up
Hey Gerald, I am looking at getting the shelf for sure. Being able to use a drip pan would definitely have its advantages. Thanks for stopping by 😎
Good video Mike, soon the purchase both the Fan extension and shelf extension
Thanks Chuck. I belive I will get the shelf too. I appreciate you stopping by my friend 😎
I've been checking them out. They are nice. Take care Mr. Chavez
I do not regret getting this cooker. It does an awesome job. Grilling or smoking/barbecuing. It works great. Thanks for watching my friend 😎
Nice mod, it makes sense! Nice
Thanks bro I enjoyed doing this. It should fix my issue.
Sweet mod👍🏽. Les go 🔥💨🍖🍗🥩
Andale 🏃♂️🏃♂️
Very helpful video Mike thank you! I'm ordering a unit now. Regarding the iGreely cable, there are 2 types. 5V to 9V OR 5V TO 12V. Does it matter?
I've got the 5V to 12V and it works really well. I'm not sure if the 9V works. Just remember to store the cables in a dry place and don't leave them connected to the cooker. They will fail. I found out the hard way
Mike, any plans to do the rotisserie mod on this like Tom Horsman did? I'm still having fun with the grill as is, but I can't promise it isn't in my future.
I'm not planning that in the near future, but who knows 😎
I have seen people put a wood block in the ash pan like hickory or cherry after the mod so the hot ash make it smoke better . Haven't tried it but it's a idea .
Yeah Steve putting wood in the ash pan is a major reason that the fan flap gets destroyed. I usually put plenty of wood in the charcoal hopper. But with this mod I will be putting wood in the pan. Thanks for stopping by my friend 😎
I put wood in the ash pan without mods and have not had a problem with it so far. Just don't get crazy with it. I also put some wood in my hopper like Mike said, so I only throw a medium size chunk or two in there at time in the ash pan and it definitely kicks out a nice hickory smell. They typically will catch on fire at some point, so don't over do it.
@kevinmach730 I haven't had an issue with the flap. But I was getting charcoal debris in the fan. Hopefully this will fix that
@@mikecha1957 Was your opinion that the charcoal was coming from debris dropping into the ash pan and bouncing into the fan? I guess it doesn't matter, as a fan positioned further away would like fix it-just more curious where you thought it was coming from.
@kevinmach730 I assume that is the case. I'm not sure how else the debris would get in there. Hopefully, this mod will keep my fan clear.
Waste of money watch the Facebook groups fan issues is user issue
I got this because of getting charcoal debris in my fan motor not because of flap issues
@@mikecha1957 mesh grate is $6