My DS-51-DIA-HST arrived today. I have put it inside my F-22 fuselage. I thought it will be a 30min job, but it took 3 hours(!). This fan is 93mm EDF with a very large intake lip (which I had to trim by half anyway), plus the ESC wires need to go around it, rather all together on top - I had to cut out A LOT of foam to fit it all. If you did not do the work yet, get a hot U-shaped wire for styrofoam cutting first.
These are such a beautiful bit of kit, it’s great timing for me. 😊 i’v been tempted to buy one for a 90mm edf, either the Viperjet for the Zeus, but can’t see any decent review videos of it. Look forward to seeing yours. 👍
My long term ongoing project was also to make the most powerful Freewing F-22, it looks like we are on the same track. Currently I am using a Schubeler 90mm HDS with HET 700-75-1250 on 12S, but yesterday I also ordered a 93mm HST fan to step up :) One tip from me: the ducting is OK for the stock motor (little difference between reference values and installed thrust), but for such extreme setups, both inlet and outlet are way too small. I removed the duct splitter (two horizontal cuts) and added a cheater hole in the EDF cover, just in front of the fan. This has increased the performance by A LOT - for no cost or added weight. I don't have the old values, but I after the mods I have 6.8kg (15lb) of installed thrust at 155A using SMC HVs. I hope to get 7.5kg using some less amps with the HST.
Hey man!! I actually did the same thing with the cheater holes!! lol we are making the doors now! Thank you for your tips I appreciate it. I loved the last one on 12s that we did with an 1125 Schuby. I’m firing it up today finally got the batteries soldered last night. Looking forward to more chats. My email is hamiltonhangar@gmail.com
@@hamiltonshangar I saw this one. You gave me some inspiration, to get the Schubelers. I have just added two flight videos of my setup today - check them out. One more tip - you mentioned you want to use two 6000mah batteries. If remove the balsa battery board, then you will be able to put them in the back, on top of each other. This will give you a neutral CG.
@@adamtrzaskowski3901 damn man that’s awesome!! I do have a 6000mah flight on the channel as well. You can do whatever you want to this jet lol. I did check out your flights and that thing is light! Consider reinforcement in the fuse and wings before throwing the HST in there. It’s so beneficial. I can share my build anytime. :)
@@hamiltonshangarI am using the extra power for verticals and coming out of 3d maneuvers. I actually never went full power for longer then 2-4 seconds. Extra reinforcements would make it heavier and hamper the 3d performance - and I would still be risking structural failure ;)
Beautiful EDF...My question is...How are you planning to fit two 6S 5000mAh batteries in the Raptor's battery compartment? I have one of those 90mm Freewing F-22s, and one 5200mAh 6S battery takes up the entire compartment. Good luck with your set-up. Thumbs-up. Have a great rest of your night 🌙 Greetings from Douglas, Arizona 🌵 👍🏾 😊 🇵🇷 Like#50
www.schubeler.com/product/ds-51-axi-hds/?v=7516fd43adaa There you go! This is the one that put into the first one we did with some modifiations! Thanks for watching!
IDK man, that ESC is gigantic and is gonna kill your airflow. How many amps is it specd to pull? Should be fine with a good simple low profile YPG 150a HV ESC and ditch that cooling fan.
My DS-51-DIA-HST arrived today. I have put it inside my F-22 fuselage.
I thought it will be a 30min job, but it took 3 hours(!). This fan is 93mm EDF with a very large intake lip (which I had to trim by half anyway), plus the ESC wires need to go around it, rather all together on top - I had to cut out A LOT of foam to fit it all. If you did not do the work yet, get a hot U-shaped wire for styrofoam cutting first.
Sweet man!!
Wow!!! Crazy cool project man! Good luck with it!
Yessir thank you!!
Oh man that F-22 is gonna fly almost like a turbine 😮
Hopefully she sounds like the real deal!! Thanks for watching man!
Probs faster! 17lb of thrust?!
@@M4rkmcc21 yessir on 12s!
These are such a beautiful bit of kit, it’s great timing for me. 😊 i’v been tempted to buy one for a 90mm edf, either the Viperjet for the Zeus, but can’t see any decent review videos of it.
Look forward to seeing yours. 👍
Badass motor!!
Thank you.!!
Unleash the beast. Can't wait to see this.
Yessir!! Thank you for watching and being a subscriber, we appreciate that! :)
My long term ongoing project was also to make the most powerful Freewing F-22, it looks like we are on the same track.
Currently I am using a Schubeler 90mm HDS with HET 700-75-1250 on 12S, but yesterday I also ordered a 93mm HST fan to step up :)
One tip from me: the ducting is OK for the stock motor (little difference between reference values and installed thrust), but for such extreme setups, both inlet and outlet are way too small.
I removed the duct splitter (two horizontal cuts) and added a cheater hole in the EDF cover, just in front of the fan. This has increased the performance by A LOT - for no cost or added weight. I don't have the old values, but I after the mods I have 6.8kg (15lb) of installed thrust at 155A using SMC HVs.
I hope to get 7.5kg using some less amps with the HST.
Hey man!! I actually did the same thing with the cheater holes!! lol we are making the doors now! Thank you for your tips I appreciate it. I loved the last one on 12s that we did with an 1125 Schuby. I’m firing it up today finally got the batteries soldered last night. Looking forward to more chats. My email is hamiltonhangar@gmail.com
12s 90mm Freewing F-22 Raptor
ruclips.net/video/85V8kNCCThE/видео.html here is the first one we did a couple years ago now
@@hamiltonshangar I saw this one. You gave me some inspiration, to get the Schubelers.
I have just added two flight videos of my setup today - check them out.
One more tip - you mentioned you want to use two 6000mah batteries. If remove the balsa battery board, then you will be able to put them in the back, on top of each other. This will give you a neutral CG.
@@adamtrzaskowski3901 damn man that’s awesome!! I do have a 6000mah flight on the channel as well. You can do whatever you want to this jet lol. I did check out your flights and that thing is light! Consider reinforcement in the fuse and wings before throwing the HST in there. It’s so beneficial. I can share my build anytime. :)
@@hamiltonshangarI am using the extra power for verticals and coming out of 3d maneuvers. I actually never went full power for longer then 2-4 seconds. Extra reinforcements would make it heavier and hamper the 3d performance - and I would still be risking structural failure ;)
🔥💯💪🏾 good unboxing bro
Coach!! thanks for watching bro!!
you made professional unboxing. ;)
Thank you for watching :)
Wow that’s going to be epic Che. Jeff in LA USA
Thanks man!
Top of the line Man !!!
Thanks bro!!!
WOW! I love F-22, so wait for it!
Thank you!! Shouldn’t be too much longer!
Dude that's sick
Thanks man!
AWESOME MAN !!!BOOM !!!👍🏻✌🏻🖖🏻
Thanks EQ!! Cheers man
Beast mode!!!!
Yess!!!! thanks for watching!
NIIIIIIIIIIIICE! 😁👍
Thanks Dave!
1050 motor COOL !!
Never even heard of one of those….
I need one lol
Yes get one!
Ahhhh the sweet smell of Schubeler carbon fiber. That should wake up the F22 or anything else you were to use it in. 👍🏼
lol!!!! Thanks for watching man!!
Beautiful EDF...My question is...How are you planning to fit two 6S 5000mAh batteries in the Raptor's battery compartment? I have one of those 90mm Freewing F-22s, and one 5200mAh 6S battery takes up the entire compartment. Good luck with your set-up. Thumbs-up. Have a great rest of your night 🌙 Greetings from Douglas, Arizona 🌵 👍🏾 😊 🇵🇷
Like#50
Freewing 90mm F-22 Raptor on 12s & 2x 6s 6000MAH
ruclips.net/video/rhbe9BEylr4/видео.html
@@hamiltonshangar Thanks for your response...Awesome setup...😊👍🏾🇵🇷
Wow 🤩
Thanks bro!
that should do it 😎👍👍
Yessir!
Remember you had a Schubeler in the 90mm L39 and we know how that turned out. lol Good luck pal.
That wasn’t cause of the motor lol that’s for watching again much appreciated !! 🫡
Always a please to see a good man get back on the horse and fly again.
I need a schubler in my raptor!!!! Any link?
www.schubeler.com/product/ds-51-axi-hds/?v=7516fd43adaa
There you go! This is the one that put into the first one we did with some modifiations! Thanks for watching!
What did that motor cost you?
enough to have me saving for it the last 6 months lol thank you for watching!
What motor Mr. Hamilton ?? I got here late Bud !!
This is on the DSM 1050KV :)
I have your old schuebler setup in my f22....it's sick
Hell yeah man I remember!!! That’s awesome man glad to hear she’s still rolling strong 🫡🤝
Wow. I'd put that thing on a display stand.
Shes on the shelf right now (for now) lol Thanks for watching man!
Gonna scream!
Yessir!!
IDK man, that ESC is gigantic and is gonna kill your airflow. How many amps is it specd to pull? Should be fine with a good simple low profile YPG 150a HV ESC and ditch that cooling fan.
Were not using the fan we just haven’t took it off yet and we’re adjusting for the ESC :)
@@hamiltonshangar Hell yeah! Gonna be awesome dude! The HST tech is world class!
Test it in a 70mm and do 12s. For science
lol! Thanks for watching!
@@hamiltonshangar I appreciate the videos. Keep them coming sir