How to compress rear electrical parking caliper on Toyota or Lexus NX200t

Поделиться
HTML-код
  • Опубликовано: 10 сен 2024
  • Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
    RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
    #compresselectriccaliper #caliperfornx200 #nx200tcaliper #nx200tcaliper
    #lexusrearbrakes #2017lexusnx200rearbrakes #lexusnx200rearbrakes #electricparkingcaliper #2016lexusnx200rearbrakes #howtoreplacebrakesonelectricparkingcaliper #2018lexusnxrearbrakes #lexusrearbrakes #brakeservice #replacebrakes #changebrakepads #rotors #brakesandrotors #lexusnxrearbrakepads #pads #rearbrakepads #lexusnxrearbrakes #2019lexusnx200rearbrakes #2020lexusnxrearbrakes #2021lexusnx200rearbrakes #lexusnx300rearbrakes #compresselectricparkingbrakecaliper #parkingbrakecaliper

Комментарии • 69

  • @shadoesitall
    @shadoesitall 4 месяца назад +1

    Worked for my Lexus NX 200t F Sport! Thanks so much

  • @jojo6663330101
    @jojo6663330101 3 месяца назад +1

    Worked great on a 2020 toyota corolla. You saved the day! Thanks 😊

  • @carsonknowlton1528
    @carsonknowlton1528 2 месяца назад +1

    This worked for my 2020 Range Rover Evoque!!! Thank you!!!

  • @unebonnevie
    @unebonnevie 8 месяцев назад

    Great video on those who have electric parking brake.

  • @alansousa2488
    @alansousa2488 12 дней назад +1

    Thank you, help me a lot

  • @VanDus3n
    @VanDus3n Месяц назад +1

    I have me a 21 Camry Hybrid with the electric bullshit. The Allen key worked for one bolt, ended up stripping the other. What would I use to get that second bolt off?

  • @fisherbrown903
    @fisherbrown903 Год назад +1

    U r so smart mr rb. Good for diy. No computer need Just take off eletric part

    • @RBTheMechanic
      @RBTheMechanic  Год назад +1

      Yeah the damn $5000 scan tool wasent compatible and the snap on had no answer for me

    • @fisherbrown903
      @fisherbrown903 Год назад +1

      @@RBTheMechanic is ez to change 2014 camry pvc valve without taking intake manifold out. Accesse from right tire botton , take off tire I burn 800ml. Per 1000 miles. i4 camry

    • @RBTheMechanic
      @RBTheMechanic  Год назад

      @@fisherbrown903 I will look in to that

    • @fisherbrown903
      @fisherbrown903 Год назад +1

      @@RBTheMechanic ur previous video use 9v. Battery is It same process?

    • @RBTheMechanic
      @RBTheMechanic  Год назад

      @@fisherbrown903 u can use volt power to retract it but yes I used 9v but I would go with 5v to be safer

  • @theodorekell
    @theodorekell 6 месяцев назад +1

    Retract of the brake can be done without leaving the cockpit. There is a maintenance mode that one can set using sequence of button pushes

    • @RBTheMechanic
      @RBTheMechanic  6 месяцев назад +1

      Ok send us the instruction would love to know I tried hominid the button down and up and down all kinds of stuff didn’t work

    • @theodorekell
      @theodorekell 6 месяцев назад +1

      ​@@RBTheMechanicHere is NX video on how to hook connector and then it will work
      ruclips.net/video/ispWeXHmYDo/видео.html
      This explains all 9 yards

  • @alexhilbert9682
    @alexhilbert9682 24 дня назад +1

    I extended the piston out to far and wont go back in i did see a little on the floor while trying to get it back in on my lexus IS 2021 ...tou have any suggestion

    • @RBTheMechanic
      @RBTheMechanic  24 дня назад +1

      Well now I need to replace the caliper if it dosent go back in togather also if it dose go back u need to bleed it

    • @alexhilbert9682
      @alexhilbert9682 23 дня назад +1

      @RBTheMechanic I got it go in and I bleed the brakes but there's a message about the emergency brakes not working how do I reset the lights

    • @RBTheMechanic
      @RBTheMechanic  23 дня назад

      @@alexhilbert9682 is the connector in? On both calipers

    • @alexhilbert9682
      @alexhilbert9682 23 дня назад +1

      @RBTheMechanic yes it's working but won't engage the parking break

    • @RBTheMechanic
      @RBTheMechanic  23 дня назад

      @@alexhilbert9682 check the connectors if they r connected on both calipers

  • @danielmarjanovic9957
    @danielmarjanovic9957 9 месяцев назад +2

    I have. 2019 Lexus es350. I put the car in service mode. Changed the front pads and rotors. Somehow managed to push the drivers rear caliper piston back in with the 12 volt method as the car service mode wasn’t doing it. The passenger rear caliper piston is stuck and won’t retract. What is the issue? I’ve tried everything. Now my car is stuck in service mode with the parking brake flashing. I’m confused. I ordered a new caliper so maybe this one is seized up and the system recognizes this? Help.

    • @RBTheMechanic
      @RBTheMechanic  9 месяцев назад

      For front u don’t need service mode on for rear check ur connectors u need to take it out of service mode since u put it in service mode

    • @danielmarjanovic9957
      @danielmarjanovic9957 9 месяцев назад +1

      @@RBTheMechanic it’s not letting me take it out of service mode. What’s the step?

    • @RBTheMechanic
      @RBTheMechanic  9 месяцев назад

      @@danielmarjanovic9957 u might have to google it I never use service mode to do this. It soooosit of what u did to put in service more

    • @Notanotherinternetperson
      @Notanotherinternetperson 6 месяцев назад +1

      Having the same issue but for my rear driver side , any luck ?

    • @danielmarjanovic9957
      @danielmarjanovic9957 6 месяцев назад

      @@Notanotherinternetperson replaced the epb on the rear and used a scanner to reset everything. Go to harbor freight and buy the scanner that has EBP capability and just rerun it haha.. I would do it for you in 10 minutes if I could help you out but it’s Easy!

  • @ahmedmalick1
    @ahmedmalick1 Год назад +1

    Used the 12v method but the piston came out more then it should be. Now the piston is not going back in. What should I do

    • @RBTheMechanic
      @RBTheMechanic  Год назад

      U was going the wrong way did the fluid come out u can put the position back but u might need to bleed it and check no more leak after that

  • @AbdulKarim-fp9qh
    @AbdulKarim-fp9qh 11 месяцев назад +1

    You can make this work easier without making it so difficult
    You can take a battery and plug it in with the connection out
    It’s very easy brother.i do always that.

    • @RBTheMechanic
      @RBTheMechanic  11 месяцев назад +2

      That too I showed that in another video

    • @DMenny
      @DMenny 5 месяцев назад

      Yo what's the tool called that you retracted the piston with? Like a cog tool or what?​@@RBTheMechanic

  • @npolite22
    @npolite22 Год назад +3

    Electronic brakes is the worst invention for a car.

    • @RBTheMechanic
      @RBTheMechanic  Год назад

      Yeah they suck!!!! I be afraid to work on these one wrong move. And part is back order

  • @samuelcontreras5041
    @samuelcontreras5041 6 месяцев назад +1

    Thank you so much!!! ⭐⭐⭐⭐⭐

  • @tmgero
    @tmgero 11 месяцев назад +2

    Man what a way to make it more difficult 🤦‍♂️

  • @wojmasta17
    @wojmasta17 Год назад +1

    Awesome DIY. Im gonna be changing the pads this weekend. But i noticed the piston boot is ripped because breaks are worn almost all the way. Can i put a boot without removing the piston completely?

    • @RBTheMechanic
      @RBTheMechanic  Год назад

      I think u can but I might. Or find the boot sepertly I would clean it out and put lubercation and it should be fine for now

  • @ashtonwoods
    @ashtonwoods Год назад +1

    Good vdo, does car need to be in neutral at start to disengage parking break or just parking break off ? Also which method is safe and correct; the one in this vdo of opening the electronic parking break motor or using 9V battery ?

  • @codydonovan7356
    @codydonovan7356 6 месяцев назад +1

    Mine extended all the way out. Now I can’t get it back

    • @RBTheMechanic
      @RBTheMechanic  6 месяцев назад

      Welll try and bleed it if it goes back in other wise new caliper

  • @faithfullee100
    @faithfullee100 9 месяцев назад +1

    Where can I purchase those Torox tool sets? I'm in Toronto, Canada 🇨🇦

    • @RBTheMechanic
      @RBTheMechanic  9 месяцев назад

      eBay I got them from other wise auto part store

    • @faithfullee100
      @faithfullee100 9 месяцев назад +1

      @@RBTheMechanic Thank you so much, what's the name of the parts, I should ask them? Have a wonderful weekend. I owned a 2021 Lexus 250h, I believe their brake system is almost identical to the Lexus 200h isn't it?

    • @RBTheMechanic
      @RBTheMechanic  9 месяцев назад

      @@faithfullee100 I don’t have the name maybe u can show then

  • @stevepdr33
    @stevepdr33 Год назад +1

    What is the name of the tool you used to rotate that back of the caliper?

    • @RBTheMechanic
      @RBTheMechanic  Год назад +1

      I don’t have name I did mention u can get it from Amazon I got this one from sears like 15 years back

    • @polefighter6
      @polefighter6 Год назад +1

      Do you know what size that Triple Square Bit is?…I need 1 really bad.

    • @RBTheMechanic
      @RBTheMechanic  Год назад +1

      @@polefighter6 no I mention it in the video it kit I have

    • @polefighter6
      @polefighter6 Год назад +2

      @@RBTheMechanic No worries, I did some digging and found out it is T-45 Torx Bit….perfect fit. Thank you for putting me on track; I’m a new subscriber.

    • @RBTheMechanic
      @RBTheMechanic  Год назад

      @@polefighter6 yup I use torque on these also

  • @djdev3077
    @djdev3077 8 месяцев назад +2

    Just buy the scanner stop being cheap.

    • @RBTheMechanic
      @RBTheMechanic  8 месяцев назад +1

      And what if that scanner is not comparable with ur car? I have $5000 snap on scan tool one of these cars came in and it wasent compatible and they said u need $900 update and little did u know they said oops it’s still not compatible anways lost all hopes so I put the computer to use that god gave me. MY BRAIN. Anways I do have video on this situation

    • @mvnga3362
      @mvnga3362 2 месяца назад +1

      @@RBTheMechanic if you get bi direction will work most car some modern car now change battery need a scanner too or you'll kill the alternator really fast

    • @RBTheMechanic
      @RBTheMechanic  2 месяца назад

      @@mvnga3362 ok