Even 9years after your release of this video, it is super helpful. Ive just purchased a Stanley 45 and the instructions for its use are missing. Thank you for maintaining this on your channel!!
Thanks for the nice explanation given. Your explanation certifies the dedication of its creators. Great people who became immortals by their productive genius. People like you make a religion to followers.
Good video with very deep insight as to the versatility of this plane. I bought one last year but unfortunately most of the smaller cutters were snapped at the notch or bent out of shape. Now I am a bit wiser and have just bought a N0 55 plane, every single one of the four boxes of cutters are in pristine condition just like the rest of the plane. Can't wait to start using it this weekend
Excellent and timely video Mitch. I have had two No. 45 awaiting refurbishment for some time. One with a wooden handle like yours and the other a chromed metal handle. I think the metal handle version is the older plane. Excellent commentary on the various parts and what they're used for, always wondered what the clam was. Looking forward to seeing the No. 45 in action. Cheers Mick
good video. lot of stuff on this amazing thing. the cam stop, for instance. never wold have figured that out on my own. also the fence section flipping around.well done.
For the depth adjusting, why is there a groove in the side of the screw (adjustment mechanism) Showed @3:38? I just got one of these things. and the pin that notches into the blade just spins around unless I hold it while adjusting depth. I think its from rust, but wondering if it has to do with that groove.
Ah, I think you have a little repair to do. There should be a small alignment pin through the side of the top hole, which engages the groove and prevents the screw rotating.
Yes! You are a genius! I removed some rust and see a small pinhead that is not engaging the groove in the screw. I think the part that engages the screw may have rusted away. I'll try to punch out whats left of it and fit a new pin.
Thank you so much for the Stanly 45 instructional. I inherited a full 45 set that is in excellent condition and hadn't a clue what were best practices in using it. It's been sitting on the shelf in the box. Your videos inspire me to give it a closer look-see. What kinds of woods do you find that it best works with? And thank you for making these videos for a rather limited crowd. (I did subscribe).
I assume you could also use the fence backwards against a "wall" or some kind of rail if you were cutting a groove into a large piece that was too wide for the fence to rest against the side of the piece?
Sadly the fence needs to drop down with the cut as it proceeds. I use a wooden batten clamped on the workpiece and run the planes skate against it. Once a cut is established, the groove will guide the plane.
@@mitchwoodwork Ah yes, of course! I just got my first combination plane today, a Lewin, so I still forget some of these obvious things, even though I know them somewhere in the back of my brain.. And thanks, I'll keep that batten tip in mind.
Hi Mitch, that was an interesting video, thanks! Your 45 seems to be in a nice condition, do you have all the cutters? I have a Record 405 combination plane which I've restored and used for a few basic (ploughing) tasks. So I'm quite interested in your coming-up videos of the 45!
Unfortunately I don't, although I've got quite a few. Of course they are still available, so if I find the need to use one I don't have, then I guess I've justified buying it ;)
That's a good question! I've not done it, but I don't recall seeing any visible fixings on the 45s and 50s I've dealt with, and would therefore guess that the handle are glued. I would strip any varnish and look for a joint line. If there is one, wrap it up in a hot damp cloth and with luck the glue will soften and allow the parts to be separated.
I just bought a 45…how do you adjust the fence if it is not parallel to the skate, as you showed is the case on yours? It doesn’t look like there’s any way to put any shim material in there to make it parallel…
I assume you have a wooden fence, in which case you can plane it, using stop shavings, into parallel. You could also loosen the wooden strip and shim it into parallel. If you don't have a wooden fence, then add one which is shaped to take out the error.
Yes complicated to say the least...looks like quite a bit of fiddling to get it where it needs to be....Well over my head. BTW, I'm jealous of that moat behind you. I would like one just in case the Visigoths decide to go for a sail.
WOmadeOD - Made in Wood with Mitch Peacock Here's one that needs a little work. Maybe you can go give them some pointers. www.courier.co.uk/Hever-Castle-drawbridge-undergoes-restoration/story-18022884-detail/story.html I think somebody named Ann Boleyn lives there......or used to.
Even 9years after your release of this video, it is super helpful. Ive just purchased a Stanley 45 and the instructions for its use are missing. Thank you for maintaining this on your channel!!
Thank you, good presentation with no babbles, much appreciated, subscribed with gratitude.
I am impressed by the video's quality. The explanation is also superb.
Thanking you
Much needed video on these complex planes. I look forward to the promised follow-ups on specific tasks
BobMcPike Thanks Bob, hoping to get the time to start filming this weekend.
I just bought a 45 and this video is really useful. Thanks!
Pleased to be of help
Most helpful video so far
Thank you.
Excellent walk through of a complex tool. Many thanks!
Cheers Sean
Have to say you explained the use of the Stanley 45 perfectly! Thank you for the video.
HardTarget Jimmy Thanks!
Well done, sir, very useful information and well produced video; and yes, you show a beautiful backdrop, too. I will be watching more. Thank you.
Many thanks
Thanks for the nice explanation given. Your explanation certifies the dedication of its creators. Great people who became immortals by their productive genius. People like you make a religion to followers.
Thank you my friend
Good video with very deep insight as to the versatility of this plane. I bought one last year but unfortunately most of the smaller cutters were snapped at the notch or bent out of shape. Now I am a bit wiser and have just bought a N0 55 plane, every single one of the four boxes of cutters are in pristine condition just like the rest of the plane. Can't wait to start using it this weekend
smike230966 Thanks for the compliment. However I'm now suffering plane envy - Haha! I'm sure you're going to enjoy using it. Happy woodworking, Mitch
Just what I've been needing ! Now to put mine to work after a tune up. Thank you
jamesrpm My pleasure.
Bravo ! This thing has always been a mystery to me. Cool as hell. I'm off to watch the rest of your vids on this plane.
Cheers Brian, hope they shed some light
Thank you Mitch, the cam stop info. Was very useful.
Excellent and timely video Mitch. I have had two No. 45 awaiting refurbishment for some time. One with a wooden handle like yours and the other a chromed metal handle. I think the metal handle version is the older plane.
Excellent commentary on the various parts and what they're used for, always wondered what the clam was. Looking forward to seeing the No. 45 in action.
Cheers
Mick
Mick Doherty Thanks Mick, hope to start filming those videos at the weekend.Yes, the full cast handle is older, and lovely looking too. Cheers, Mitch
good video. lot of stuff on this amazing thing. the cam stop, for instance. never wold have figured that out on my own. also the fence section flipping around.well done.
Cheers
A very useful primer, thanks!
Cheers
Very nice video and a great detailed explanation. I love my 45s and hope to get a 55 someday soon. Thk-u sir!!
Thanks. I'm keeping an eye open for a 55 too
Awesome video sir. Thank you
Cheers
Thank you so much Mitch, I am planning on using my Dad's Record Multiplane tomorrow. I now have much more of a clue how to go about it!
They can be a challenge to figure out. Some functions rarely use and have to refer back to the manual 😂
I inherited a 45 from my father in law. Really looking forward to your videos on its use as I would love to use it properly.
Cheers Allan
Get your sharpening gear out and hone those blades, I'll be starting those videos soon.
For the depth adjusting, why is there a groove in the side of the screw (adjustment mechanism) Showed @3:38? I just got one of these things. and the pin that notches into the blade just spins around unless I hold it while adjusting depth. I think its from rust, but wondering if it has to do with that groove.
Ah, I think you have a little repair to do. There should be a small alignment pin through the side of the top hole, which engages the groove and prevents the screw rotating.
Yes! You are a genius! I removed some rust and see a small pinhead that is not engaging the groove in the screw. I think the part that engages the screw may have rusted away. I'll try to punch out whats left of it and fit a new pin.
Thank you so much for this!
My pleasure
Mitch ive just been given the 405. Havn't used it yet . Been to busy with work but hoping to soon.Thanks for the great info
Lucky! Hope you enjoy using it as much as I do my 45
Mitch Peacock - WOmadeOD sir I have one thats in mint condition, can you tell me how much these tools sale for
Good overview.
very nice video! thank you!
Cheers
Pura vida My friend for sharing this review for me it was helpfulness
Cheers
couldn't help but notice your wonderful view of the backyard. I bet it makes it difficult to leave the shop?
It's funny, I don't even notice it when I'm 'in the zone'.
I want that thing, where should find it in western cape Southfield?
Online auction sites are your best bet
Thank you so much for the Stanly 45 instructional. I inherited a full 45 set that is in excellent condition and hadn't a clue what were best practices in using it. It's been sitting on the shelf in the box. Your videos inspire me to give it a closer look-see. What kinds of woods do you find that it best works with? And thank you for making these videos for a rather limited crowd. (I did subscribe).
Cheers John. Straight grain, clear pine, poplar, that sort of thing. At least until you get used to it. Have fun
I assume you could also use the fence backwards against a "wall" or some kind of rail if you were cutting a groove into a large piece that was too wide for the fence to rest against the side of the piece?
Sadly the fence needs to drop down with the cut as it proceeds. I use a wooden batten clamped on the workpiece and run the planes skate against it. Once a cut is established, the groove will guide the plane.
@@mitchwoodwork Ah yes, of course!
I just got my first combination plane today, a Lewin, so I still forget some of these obvious things, even though I know them somewhere in the back of my brain..
And thanks, I'll keep that batten tip in mind.
Thanks
Hi Mitch, that was an interesting video, thanks! Your 45 seems to be in a nice condition, do you have all the cutters?
I have a Record 405 combination plane which I've restored and used for a few basic (ploughing) tasks.
So I'm quite interested in your coming-up videos of the 45!
Unfortunately I don't, although I've got quite a few. Of course they are still available, so if I find the need to use one I don't have, then I guess I've justified buying it ;)
Do you know how to remove the wood on the handle? I am restoring a 45 and 46, and that's all that's slowing me down now. Thanks
That's a good question! I've not done it, but I don't recall seeing any visible fixings on the 45s and 50s I've dealt with, and would therefore guess that the handle are glued. I would strip any varnish and look for a joint line. If there is one, wrap it up in a hot damp cloth and with luck the glue will soften and allow the parts to be separated.
Thank you
You're welcome
Now that is a tool you want to have, whether you need it or not.
Sure would look good hanging on the wall!
I just bought a 45…how do you adjust the fence if it is not parallel to the skate, as you showed is the case on yours? It doesn’t look like there’s any way to put any shim material in there to make it parallel…
I assume you have a wooden fence, in which case you can plane it, using stop shavings, into parallel. You could also loosen the wooden strip and shim it into parallel.
If you don't have a wooden fence, then add one which is shaped to take out the error.
Yes complicated to say the least...looks like quite a bit of fiddling to get it where it needs to be....Well over my head.
BTW, I'm jealous of that moat behind you. I would like one just in case the Visigoths decide to go for a sail.
Maybe I should build a drawbridge next!
WOmadeOD - Made in Wood with Mitch Peacock Here's one that needs a little work. Maybe you can go give them some pointers. www.courier.co.uk/Hever-Castle-drawbridge-undergoes-restoration/story-18022884-detail/story.html
I think somebody named Ann Boleyn lives there......or used to.
Aarhhh...I see power tools - not quite authentic then, mind you it looks a tad cold to hang about long enough to do it all by hand!