Jura Impressa Repair and Complete Restoration
HTML-код
- Опубликовано: 28 ноя 2020
- In this video you can see how I'm restoring my good friend's Jura Impressa C60. The full automatic coffee machine is already five years old and has around 15,000 coffees. The machine looks quite worn and requires a little love from a craftsman. Follow me through my work on this beautiful coffee machine and learn step by step repair skills which you may be able to use later in your own repairs. I hope you're enjoying watching and I would be greateful if you leave me some feedback.
M Y T I P - B O X
_________________
www.buymeacoffee.com/myworks ☕
www.paypal.me/ytmyworks
Affiliate links:
Bezahlter Link:
U S E D P A R T S
_________________
Entkalker/discaler: amzn.to/3huhT6S
Flachpinsel/flat brush: amzn.to/2AxEmPS
OKS Multi Silikonfett/OKS silicone grease: amzn.to/3cX39eV
OKS 470/471: amzn.to/3nd5nMb
O-Rings: amzn.to/3oJiKUs
Deckel Wassertank/cover of the water tank: amzn.to/37lkRXl
Abtropfblech/drip tray: amzn.to/36fy6tk
Menzerna Polish Set: amzn.to/2PDuE68
Oval Bit: amzn.to/3c1PHIt
M Y W O R K
______________
00:58 disassembling
03:08 removing the brewing unit
05:08 disassembling the coffee spout
06:20 disassembling of the grinder
07:55 cleaning the chassis
08:30 assembling the grinder
09:29 disassembling and cleaning the brewing unit
12:29 polishing the front end
13:32 assembling the coffee spout
14:05 assembling the brewing unit
17:49 lubricating the transmission
18:25 installing the brewing unit
18:47 revising the dispensing valve
20:53 assembling the water connection
21:20 function test
22:34 replacing lid water tank
23:58 the first espresso
#JuraImpressa #Repair #Restoration #Howtofix
This has got to be the best video about Jura machines. We have a C7 that we have learned to repair ourselves but it is videos like this that make it possible. Thank you for this.
Well filmed, no irritating music, clear, careful, useful, and a great result. Well done, and thank you!
THANK YOU!!! You just saved me a lot of money. I own exactly the same machine and managed to repair it myself thanks to your video . THANK YOU!!! 👍👍👍
Ok that's why i will not buy an expensive coffee machine 😀
So far so good. What lubricant and sealers are used? One is a clear blue gel and the other is white. Thank you, again. Suzanne
Where do i send mine??👍
I have an Impressa C5 which looks exactly the same except it is mostly a matt finish. I have taken it apart 3 times to clean it, but not as well as you have. If I had all of your tools, I would definitely try it! Thank you for a great tutorial
I can take it apart,but to put it back together and make it work would be a big problem 🤣😥
This is the best jura impressa rebuild vid out there bar none. Just refurb'd a C9 without it (predecessor to C60, almost identical inside except for power switch at top and front coffee output section).. Would have been alot easier! Way to go @myworks
That's why i hate fully automatic machines. Grinder and water in the same enclosure… we had a coffe rental service in our office, where nobody cared for the jura as long it spat out coffee. They had to come in every two month, just exchanged the machine for a refurbished one and took the other to remove the mold at their special facility. I guess. I hope. :-)
Thanks for a great video. I have a Jura impresa F9 that has worked perfectly, but is now stuck at "Fill System Waterportion". The floating device seems to work as it should, I have also tried to oush the hot water button - there is a loud high frequent sound, but no result. Could it be the waterpump that has given up? How would I trouble shoot that? Or are there any other likely solutions?
Hi,
Hi great video! My jura has been spraying water out of the part you remove at
I don’t see the squeeze valve clean on video I need to know where pipes from this go
Good video. After doing this to my machine I get low fill on grinder now. It seems that it’s way too fine of a grind on all settings, Any suggestions on what i may have done wrong.
Super, super nice! Thank you for sharing your work, it is of tremendous help. One question I would have: is it possible to adjust the grinder to a finer setting? Would you recommend that, or is the risk of choking it too high? My machine's setting seems quite coarse, I see it on the puck which most of the times disintegrates.
Hello! My Jura F9 is still operating but is an old girl. The screw threads which secure the brew group to the chassis, especially the bottom one near the drainage valve, are becoming worn. It is impossible to tighten a few of them. Is there a solution that you can think of for a metal screw and the POM that can be removable? Any advice would be helpful. Thank you!
Hi! To remove the back bolts (the small round ones) what did you use?
What is the white paste you use at
can you tell me what kind of lubricant was used?