Your video is great, the most detailed I have seen! The trickiest part that most people will get stuck on, is re-assembling the sliding part/metal slide plates/magnets. The easiest and best way that I have found is to leave the magnets for last. Put the metal plates on the little tabs, hold that assembly at an angle so the plates don't fall off and then slide it into the machine where it is supposed to go. After that you can use a small screw driver to pick up a magnet, push it into the hold, and it will lock right onto the metal plate - do the same for the second magnet.
This was a tremendous help in cleaning my Impressa F9. Almost identical design - the F9 seems to have more wiring. Loved the break for tea! I had a beer instead.
Thank you very much for an absolutely wonderful video tutorial. I have a Jura D4 and the outlet nozzles in the front of the device are clogged. With your instructions, I managed everything perfectly safely and reliably. The coffee maker works like new! Thank you once again and greetings from the Czech Republic. 👍👌❤🍀🍀🍀🍀🍀
Thank you so much for this video! I was able to take apart my D6 and clean it. Not quite the same and ran into a few obstacles, but was able to overcome them. Your video was incredibly detailed and helpful!
Hi. Endlich ein Handwerker der es super zeigt wie man es selber reparieren kann. Top Viedeo. Kaffeeauslauf wieder frei. Daumen hoch. Danke dafür. Werde Dich weiterempfehlen.
I can't thank you enough for making this video. I saw another one before yours, and it convinced me not to even try. I watched yours, and it broke it down into simple steps i could follow. You gave me the courage to do this myself. The only problem i had was getting the side panels back on properly without gaps. I am now drinking delicious coffee again instead of an expensive repair and shipping bill to Jura. This was awesome!
Thank you for demonstrating this process. Your excellent video is going to make this task faster and give me a little added confidence. I know this machine is older but I think it still makes great coffee. Best to you!
Great video, excellent Quality, thanksa lot With the video on my laptop, I managed to reach the nozzles, noticed that the mirror coating of the spout was damaged, a new one is on inquiry. Awaiting delivery, I cleaned all parts and reassembled. The coffee taste has improved!
Thank you! Mine is having issues w/ the dispensing spout.. rather than coming through just the side dispensers , it’s trickling down the middle..ugh We’ll have to take a look inside. Thanks!
good work friend ... I always watch your videos and learn something new . very careful and professional with what you do. a hug from Daniel Brasil - Rio de Janeiro . Lavazza maintenance technician.
Meine jura d4 scheint beim cassis rund um den Kaffeeauslauf etwas komplizierter zu sein... bekomme es irgendwie nicht weg nach dem entfernen der 4 torx Schrauben... aber ansonsten war's bis jetzt sehr hilfreich!
Hi. This was wonderful. Fixed my problem. However, i did something wrong when assembling the machine and now the spout doesn't slide vertically. Probably something with the magnetic things that attach them. Any advice or close up video on how to assemble that part back?
Hi, take care in minute 8:55 here the two sheets have to be placed exactly on the pins, these are held from below with the magnets. Everything together must be carefully installed and screwed together so that it does not fall apart again.
Hi, my machine is leaking and i found the spot! Seems like a part is just missing. Could you tell me what is wrong? I don’t know how it’s supposed to be. If you look into frond where the ground container goes, all the way in the back there leaves one water hose to the right, just behind there i have a nozzle with nothing attached. The water just squirts out there. Thanks!
@yt.myworks,please ignore my previous question, I found cafiza on Amazon...looks similar to the cleaning tablets I get from Jura. Thank you for the video. I now have the courage to clean the spouts on my c60. I thought I was going to have to ship it back to Jura for service.
I clean the coffee spout together with the brewing group, i.e. every two years when the casing is open. However, if necessary, you can occasionally clean the openings from below with a small brush.
Your video is great, the most detailed I have seen! The trickiest part that most people will get stuck on, is re-assembling the sliding part/metal slide plates/magnets. The easiest and best way that I have found is to leave the magnets for last. Put the metal plates on the little tabs, hold that assembly at an angle so the plates don't fall off and then slide it into the machine where it is supposed to go. After that you can use a small screw driver to pick up a magnet, push it into the hold, and it will lock right onto the metal plate - do the same for the second magnet.
This was a tremendous help in cleaning my Impressa F9. Almost identical design - the F9 seems to have more wiring. Loved the break for tea! I had a beer instead.
Thank you very much for an absolutely wonderful video tutorial.
I have a Jura D4 and the outlet nozzles in the front of the device are clogged.
With your instructions, I managed everything perfectly safely and reliably. The coffee maker works like new!
Thank you once again and greetings from the Czech Republic. 👍👌❤🍀🍀🍀🍀🍀
This was an excellent video. many people can learn from this. Both the screen angles and the lack of rambling made it excellent. Thank you so much
Thank you so much for this video! I was able to take apart my D6 and clean it. Not quite the same and ran into a few obstacles, but was able to overcome them. Your video was incredibly detailed and helpful!
Hi.
Endlich ein Handwerker der es super zeigt wie man es selber reparieren kann.
Top Viedeo. Kaffeeauslauf wieder frei. Daumen hoch.
Danke dafür.
Werde Dich weiterempfehlen.
Danke für das Lob!
I can't thank you enough for making this video. I saw another one before yours, and it convinced me not to even try. I watched yours, and it broke it down into simple steps i could follow. You gave me the courage to do this myself. The only problem i had was getting the side panels back on properly without gaps. I am now drinking delicious coffee again instead of an expensive repair and shipping bill to Jura. This was awesome!
I'm very glad to hear that.
I have gaps in the machine I did too and I do not know why!
@@yt.myworks, can I use the Cafiza tablets that I got for this deep cleaning instead of the ones I buy from Jura?
Would not believe the sludge I removed from my unit. About 5 years everyday use. Gross! Haha. Many thanks 🙏
It worked, thank you! I have a Jura Impressa C70. The inside and process ist quite similar to the C60. Only few differences.
You are a real inspiration! Thanks for these great videos. Sustainability at is best.
Thank you for demonstrating this process. Your excellent video is going to make this task faster and give me a little added confidence.
I know this machine is older but I think it still makes great coffee. Best to you!
Great video, excellent Quality, thanksa lot
With the video on my laptop, I managed to reach the nozzles, noticed that the mirror coating of the spout was damaged, a new one is on inquiry.
Awaiting delivery, I cleaned all parts and reassembled. The coffee taste has improved!
I am pleased!
Smoothly done - worked for me as well … including the Tee of course, too ! Thank you very much
Thank you! Mine is having issues w/ the dispensing spout.. rather than coming through just the side dispensers , it’s trickling down the middle..ugh
We’ll have to take a look inside. Thanks!
good work friend ... I always watch your videos and learn something new . very careful and professional with what you do. a hug from Daniel Brasil - Rio de Janeiro . Lavazza maintenance technician.
Hat super geklappt. Meine Maschine läuft wieder. Vielen Dank! 😊
Das freut mich 👍
Guter Arbeitsfreund... Eine Umarmung aus Brasilien - Rio de Janeiro
Hello , it's coffee time 😉.
Merci pour cette vidéo , de France 🙂.
👏👏👏👏👏👏
Great video, my C65's flow is like new. Thanks!
Meine jura d4 scheint beim cassis rund um den Kaffeeauslauf etwas komplizierter zu sein... bekomme es irgendwie nicht weg nach dem entfernen der 4 torx Schrauben... aber ansonsten war's bis jetzt sehr hilfreich!
Vielen Dank für dein video hab mich drüber getraut dank dir 😁👍
Danke, hat super funktioniert!
Thank you for the video, it was a great help!!
Very helpful, can you show how to replace the pump?
I still have to make the video, but the change is very easy. The important thing is that you buy the right pump for your model.
Thank you, this video is amazing.
Hi. This was wonderful. Fixed my problem. However, i did something wrong when assembling the machine and now the spout doesn't slide vertically. Probably something with the magnetic things that attach them. Any advice or close up video on how to assemble that part back?
Hi, take care in minute 8:55 here the two sheets have to be placed exactly on the pins, these are held from below with the magnets. Everything together must be carefully installed and screwed together so that it does not fall apart again.
@@yt.myworks thanks!!
Sehr gutes Video. Meine läuft wieder. Danke
Das freut mich 👍
did you add baking soda to the hot water in the container for cleaning?
Yes, that was the only thing you didn’t mention. 😂. Thanks for the advice.
Thank you!!
Super. Good job
Best video! Thank you.
Merci c est sympa 👍
Hi, my machine is leaking and i found the spot! Seems like a part is just missing. Could you tell me what is wrong? I don’t know how it’s supposed to be. If you look into frond where the ground container goes, all the way in the back there leaves one water hose to the right, just behind there i have a nozzle with nothing attached. The water just squirts out there. Thanks!
Hello, is the same problem as in this video? ruclips.net/video/8cx60fPQPBg/видео.html
What is the cleaning product you use to soak the parts in?
I use washing soda from the drugstore or, most recently, Cafiza.
Is that the same as baking soda in the US? @@yt.myworks
@yt.myworks,please ignore my previous question, I found cafiza on Amazon...looks similar to the cleaning tablets I get from Jura. Thank you for the video. I now have the courage to clean the spouts on my c60. I thought I was going to have to ship it back to Jura for service.
Thank you very much
Where in the video did you clean the tamper and holder that holds the espresso grounds?
Almost everything can be seen in this video ruclips.net/video/Pc63CvsF7JI/видео.html
How often do u have to do this?
I clean the coffee spout together with the brewing group, i.e. every two years when the casing is open. However, if necessary, you can occasionally clean the openings from below with a small brush.
What is that screwdriver bit at 1:02? I’m stuck at that part.
amzn.to/4ececzT
Great Video, you know which information are important and don't waste time on stupid balbla. Thx.
Auf meiner s8 ist noch Garantie, ich werde den teufel tun und die nicht auseinander bauen. Die lass ich reparieren und dann wird die verkauft.!
Which country are you from ?
Brazil
From Germany my friend 👋😏
Looks complicated as hell. Why can’t Jura make it easy to clean parts that need regular maintenance?!?
Because...Swiss.
Mit welchen Drogen putzen Sie coffee Öl?
Washing soda or cafiza.
Thank you!