165 call charge includes parts within reason fixed within the hour if not remedial work arranged for the following day ...South Yorkshire....for the tap job ..
That green rubber boot - WB idea of a fix for a known design flaw LOLLOLOLOL This and the crispy silicon gaskets in the Kebab heatX is why I would never have a WB in my gaff
Very interesting video! Pretty impressed by how well you coped with that tap on the Belfast sink - you’re now well practiced for doing the replacement!
Well played on the Belfast sink. Tight space 👍 I don’t reall do call outs but do jobbing plumbing at £70.00. /h for the first hour and then £40.00 plus parts. Cheers for the content!
Oh yes -I forgot the leaking tap but fully agree that if the customer supplies the hardware its their responsibility and they must pay for a new tap AND the cost of removal of the faulty one AND the installation of a new one! Fortunately new taps do not leak very often.
I would have cut the back out of the unit to make it easier for me, no will see it when you replace it and the client has put back all the cleaning materials in front of it. Used to do work for a kitchen manufacturer who made the backs in all their units removable. Made it much easier for plumbers/electricians for any maintenance. Good videos mate.
Them taps was easy mate loads of room there 😂 done well with that, £120 plus VAT Saturday daytime call-out for me if I actually go out can’t remember last time I did
Interesting video. I think it would be fair for plumb base to give u replacement tap or at least 40% off on the tap since it’s been use for 3/5 years. Remind me to never install a Belfast sink. 😂 Thanks buddy
Weekend call out 1.5x - x2 rate so I'd have been £150ish for that tap washer. Also I changed the washer in identical bath taps to those basin taps, I couldn't get the head off them either, and struggled getting in with a spanner.
@@Heatking oh Stoke on Trent too, I feel bad doing it but I'm always honest when they call me and I state if they can wait until the week I can do it cheaper, family time is more important :)
Dan, I only install grohe kitchen tap which I buy from Costco for £85+VAT and I charge the client £150 + VAT. They never go wrong and if the do Costco refund within 3 years 🤷 If the client wants their own tap even better.
Sounds like a decent deal. From a decent manufacturer that mate. Yeh thankfully the customer supplied this tap. However i obviously supplied the shit one from Plumbase 😂😂😂
@@Heatking I've bought taps from plumbase and they are made in China and break in no time 🤦 The client calls you back upset why it broke in two years or in this case sooner. Just fit German 👌
The Belfast sink. Removing the tap was fairly easy but you didn't show how you got the metal and rubber retaining washer into its correct position. In a normal sink its difficult enough making them stay in position so that the nut can be fitted to the thread.!! I would have told the customer I would remove the whole back and replace it rather than doing the job through the small hole! But well done you did it. Your basin tap on a Saturday I would have charged £120 ie time and a half.
Cheers Richard, with the nut and rubber etc I managed to reach up the back of the unit but I couldn’t film it. Should have said really. 🤦🏽♂️ and £95 I charged for the Saturday visit 🙏🏽
I find I need 3 hands for even a simple sink so how you did it must have been a masterclass in acrobatics and contortions!! £95 was a good price for a simple job I agree - you forgot to charge for the washer (5p) !! The last basin job I did which was very similar I just turned the washer over and a bit of grease!!
Think that sinks older than me! Them taps want changing out really. That Belfast sink id be raging when the new one leaked 🖕. Quality of new stuff now is shocking all made as cheap as possible.
Nice one. Its hard to see but it looked like that tap spout wanted to be pushed further in the tap body. Isn't the white collar usually down inside with the cut out bit towards the back of the tap? Then the bush would sit down on the body without any thread showing . But its not your problem anyway, so no worries...just wasted your time.
Thanks mate, this is a medium, but I’m tiny haha and it’s bloody best hoody I’ve had in a long time. Only paid £25 for it offline. (Can’t remember where) be too thick though for summer I recon.
Great video as usual Dan, did you include the price of your tetanus shots in that call out? Why do people not empty out their cupboards for trades coming?
No chance replacing a 3 year old tap for free just cause it has a 5year warranty. 5year warranty is off the tap manufacturer If it had failed in the first 12 months then fit it for free if you supplied it but after that it's a chargeable job What if the tap had a warranty for 10 years and it failed 5 times in them 10 years are you fitting a new tap for free all them times if you go of checka trade you get 12months warranty off the company that's it . I have fence panels in my garden that have a 25 year warranty of the supplier, so does that mean the guys who fitted the panels have to replace a broken panel every time one breaks or cracks due to weather conditions cause the panels have a 25 year warranty. No chance
Everything you’ve said there makes perfect sense mate. Anything before 12 months replace for free if you’ve supplied. Any after. Charge at normal rate 💪🏼
Please give this video a like and comment down below. Big push for 5k subscribers this month 🎉
Mate you smashed it with that tap repair. Just goes to show not everything needs to be replaced 👌
Cheers mate. 🙏🏽🙏🏽
Looks like joiners done the wirering 😂😂😂😂😂😂😂😂😂😂
I’ve got the same arrangement at home with the Belfast sink , sink out every time makes your life easier
I thought I might have to do that to be honest 😂
That tap needs scrapping. Well done atleast you managed to put it in❤❤ sometimes taps are not worth the headache
Cheers mate, what a joke though bloody out the box faulty 😂😂😂
tough job. thanks for sharing.
Thanks for watching and commenting matey!
Excellent repairs Dan. 😊
Thank you Trevor appreciate the support buddy!
Oh the joys of discovering how other people live !
Oh yes 😂😂
165 call charge includes
parts within reason fixed within the hour if not remedial work arranged for the following day ...South Yorkshire....for the tap job ..
@@ianpotter3704 thanks Ian! Good to know that!
That green rubber boot - WB idea of a fix for a known design flaw LOLLOLOLOL This and the crispy silicon gaskets in the Kebab heatX is why I would never have a WB in my gaff
You’re right, but it makes a nice money earner 😂😂
Very interesting video!
Pretty impressed by how well you coped with that tap on the Belfast sink - you’re now well practiced for doing the replacement!
Cheers Steve, I got lucky with that tap I think, and unlucky at the same time hahah
Well played on the Belfast sink. Tight space 👍 I don’t reall do call outs but do jobbing plumbing at £70.00. /h for the first hour and then £40.00 plus parts. Cheers for the content!
Cheers Jerome! You prices above are my charges, but this one with it being a weekend was £95
Man. That tap Dan. I would have sworn more than once. Much more 😂
Hahaha oh I did, I just had to crop them out 😂😂😂
@@Heatking 🤣🤣
Thanks
♥️THANK YOU SO MUCH Alex!!
there is a oring for the cold inlet in the flow adapter pack mate, not that ive ever used one though the old one always holds, cheers for the video 👍
Cheers Tom! I don’t think I’ve ever seen a oring in the pack 😂😂 will check properly next time!
Oh yes -I forgot the leaking tap but fully agree that if the customer supplies the hardware its their responsibility and they must pay for a new tap AND the cost of removal of the faulty one AND the installation of a new one! Fortunately new taps do not leak very often.
Cheers Richard for your input! Appreciate that!
Another good one Dan. 😊😊❤
Thank you as always Paul 🙏🏽
@@Heatking 😀 ❤️
I would have cut the back out of the unit to make it easier for me, no will see it when you replace it and the client has put back all the cleaning materials in front of it. Used to do work for a kitchen manufacturer who made the backs in all their units removable. Made it much easier for plumbers/electricians for any maintenance. Good videos mate.
Thanks matey. Yeh that was an option running through my head but managed without thankfully. Removable backs would be a dream 😂😂😂
Plumb base should resolve the issue, or at least share the cost. Great episode!
Thanks Richard, I agree. In the end I gave up and bought a new tap from screwfix 😆
Them taps was easy mate loads of room there 😂 done well with that, £120 plus VAT Saturday daytime call-out for me if I actually go out can’t remember last time I did
Cheers mate. I actually fit my whole body through that hole. Just didn’t show it on the camera 😂
Interesting video. I think it would be fair for plumb base to give u replacement tap or at least 40% off on the tap since it’s been use for 3/5 years.
Remind me to never install a Belfast sink. 😂
Thanks buddy
Plumbase was useless to be honest on that tap, disappointing really, but thanks mate :)
Weekend call out 1.5x - x2 rate so I'd have been £150ish for that tap washer.
Also I changed the washer in identical bath taps to those basin taps, I couldn't get the head off them either, and struggled getting in with a spanner.
Cheers mate. Yeh I was £95 Inc mats for this one.
@@Heatking oh Stoke on Trent too, I feel bad doing it but I'm always honest when they call me and I state if they can wait until the week I can do it cheaper, family time is more important :)
@@killerbean9911 you’re doing the right thing there mate. More to life than work and money. Family is most important
Hot right and cold left, must have been a sparky
😂😂😂😂😂 love it mate 🙏🏽
@@Heatking 🤣😉
Get yourself a Nerrad Tapex kit mate, best thing I’ve ever invested in.
Had one mate, I gave it away on here 😂😂 too over priced now.
@@Heatking oh damn! I do agree is very pricey, but halves the times I do jobs so I feel it’s paid for itself
@@conorbryan9436 yeh mate I understand why people rate them to be fair. I just think they should drop that hefty price tag. Think they’re £180 now
@@Heatking agreed. I paid £170 for them at that was like 2 years ago
Love my tapex kit got me out the 💩 a few times
Thats the way to do it Dan
Cheers Keith! Best way haha
Great patience there. Awkward job.keyhole surgery is always fun...
Cheers buddy. I think keyhole surgery is just small bore plumbing sometimes haha 😂😂
Emergency Call Out Price
£125
Cheers Steven 🙏🏽
As we can all tell from fitting taps many or most are made from very weak materials even those which quite expensive. Mafe in China no doubt
I think you’re right mate absolutely rubbish!
Dan, I only install grohe kitchen tap which I buy from Costco for £85+VAT and I charge the client £150 + VAT. They never go wrong and if the do Costco refund within 3 years 🤷
If the client wants their own tap even better.
Sounds like a decent deal. From a decent manufacturer that mate. Yeh thankfully the customer supplied this tap. However i obviously supplied the shit one from
Plumbase 😂😂😂
@@Heatking I've bought taps from plumbase and they are made in China and break in no time 🤦 The client calls you back upset why it broke in two years or in this case sooner. Just fit German 👌
@@AlexRocks24-7 I’ve started buying screwfix ones, they seem better, and I recon screwfix will deal with a faulty one better. 🙏🏽
The Belfast sink. Removing the tap was fairly easy but you didn't show how you got the metal and rubber retaining washer into its correct position. In a normal sink its difficult enough making them stay in position so that the nut can be fitted to the thread.!! I would have told the customer I would remove the whole back and replace it rather than doing the job through the small hole! But well done you did it. Your basin tap on a Saturday I would have charged £120 ie time and a half.
Cheers Richard, with the nut and rubber etc I managed to reach up the back of the unit but I couldn’t film it. Should have said really. 🤦🏽♂️ and £95 I charged for the Saturday visit 🙏🏽
I find I need 3 hands for even a simple sink so how you did it must have been a masterclass in acrobatics and contortions!! £95 was a good price for a simple job I agree - you forgot to charge for the washer (5p) !! The last basin job I did which was very similar I just turned the washer over and a bit of grease!!
Think that sinks older than me! Them taps want changing out really. That Belfast sink id be raging when the new one leaked 🖕. Quality of new stuff now is shocking all made as cheap as possible.
It certainly was a good age that basin mate. The whole bathroom wants ripping out 😂
I was raging with that new tap. Thankfully I didn’t supply it!
Run
😂😂😂
If there's no "boot" just change the motor mate...I have loads of secondhand ones ont van...easy £50
Mate, multi tool the plywood back out and pack out with timber, then refit. I hate kitchen fitters
Yeh that could have been an option. But just about managed 🙏🏽
Hangin or illness 🧐 11:16
Nice one. Its hard to see but it looked like that tap spout wanted to be pushed further in the tap body. Isn't the white collar usually down inside with the cut out bit towards the back of the tap? Then the bush would sit down on the body without any thread showing . But its not your problem anyway, so no worries...just wasted your time.
You could be right there mate. I’m not 100% sure, it didn’t seem to want to go down any further like. 😂
Excellent as always mate . Your blak lader hoddie is in any good ? Comfortable? Are you sizes big /small ? ❤
Thanks mate, this is a medium, but I’m tiny haha and it’s bloody best hoody I’ve had in a long time. Only paid £25 for it offline. (Can’t remember where) be too thick though for summer I recon.
So there a decent fit not baggy? Thinking about getting 1 so I can be like you hahah
@@leepickett3655 😆😆 don’t worry, I got one to be like Pb 😅😂 and no not too baggy not too tight. I’m going to get another 🙏🏽
😂 ❤
@@leepickett3655 its.co.uk/pd/353011579000-Blaklader-3D-Logo-Hoodie---Grey-Melange-_BLA35309000.htm?gad_source=1&gclid=CjwKCAiAopuvBhBCEiwAm8jaMTLB5WCb35uDJ7yi38Wz_nyeHC05eu_98ra2Y-_vjZlMPRjsNSRAABoCMFEQAvD_BwE
Good video, you must see some scruffy bathrooms
To be fair, not always, it’s only when it’s in some rentals. But most of the time they’re not tooooo bad haha.
But but it came in a bag lol
I know 😑😬 all for nothing haha
£100 for the Saturday call out job. Based just outside Cardiff.
Yes mate 🙏🏽
I bloody hate taps 🤦♂️ can take 3 minutes or 3 hours!
You’re not joking mate, some are a right pain!
£120 + VAT - York
Thank you buddy 🙏🏽
Great video as usual Dan, did you include the price of your tetanus shots in that call out? Why do people not empty out their cupboards for trades coming?
Haha. Do they cost?? 😳😳
And I have no idea why they don’t but it bloody does my head in mate 😂😂😂
My mrs not only makes me empty the cupboards (I would anyway) but gets me to clean everything so they can’t say we’re manky 😂😂
@@Bigdaftboy hahaha. I think we are all ruled by ours Mrs’ these days mate 😂😂😂
I wouldn’t have it any other way 😂
First ! Let’s go
Cheers brother!
Bang on bud supply nothing anymore
Cheers James 🙏🏽
🤘😎🤘🫖☕️🍰
Cheers Wayne! 🙏🏽
£100 Cambridgeshire
Cheers buddy 🙏🏽
I invoice any company that supplies faulty goods for my time
Good shout that mate. Do they pay?
@@Heatking Most of the time , some supply extra products instead of cash
Check this out Dan 😮😮
What am I checking out? 😂😂😂😂
@@Heatking pimlico plumbers rates 👀👀👀
@@paul_my_plumbs_uk 😂😂😂 I wish!
@@Heatking did you 👀👀👀👀👀👀💵💵💵💵💵💵💵💵💵💵💵💵💵💵👍👍👍
@@paul_my_plumbs_uk £95 I charged i think it was Inc mats
Plumbase are liable as their contract is with you. Your contract is not with the supplier. If that makes sense.
This is the argument I had with them mate. I gave up… 😂😂
If the company is gone bust it shouldn't be your job replacing taps , you done your job first time 🤷🏻♂️
Yeh that’s true mate
No chance replacing a 3 year old tap for free just cause it has a 5year warranty.
5year warranty is off the tap manufacturer
If it had failed in the first 12 months then fit it for free if you supplied it but after that it's a chargeable job
What if the tap had a warranty for 10 years and it failed 5 times in them 10 years are you fitting a new tap for free all them times
if you go of checka trade you get 12months warranty off the company that's it .
I have fence panels in my garden that have a 25 year warranty of the supplier, so does that mean the guys who fitted the panels have to replace a broken panel every time one breaks or cracks due to weather conditions cause the panels have a 25 year warranty. No chance
Everything you’ve said there makes perfect sense mate. Anything before 12 months replace for free if you’ve supplied. Any after. Charge at normal rate 💪🏼
Don’t forget ya tetanus booster mate christ 12:21
Praise His Holy name!
@@MJ-ce6tv you need him at your side in that bathroom
😂😂😂
£45
Eeeessshhh I was a bit more hahah
@@Heatking yeah maybe 90 quid then
@@mattsan70 I can’t actually remember what I charged. Think it was £95 total.
£90 about right, doesn't look like that landlord likes spending any money, looking at that bathroom!
@@ginola602 haha it certainly needs a update!!
Tap repair £85
I was £95 Inc materials so close enough 😂😂