The cool thing I found out about having 2 USB connections is you can use one for Serato and stream it's output to a second computer at the same time! Convenient if you stream online.
Yes I think he may have been mixed up wth Rekordbox and Serato.. Still, I find it very peculiar that a Pioneer product is not compatible with Pioneer software..
You ca. Adjust it in the serato software where you can isolate each effect volume. You have to map your mic volumes in the front of the rane as a dedicated controller. There is alot of tutorials out there
I love my Rane one, I beat juggle a lot, and the platters are really good for it. There are only two things annoy me - I would much prefer the mirror start /stop, because my right hand accidentally hits start / stop when really quick juggling and also the crossfader does loosen up and also bounces quite easily.
Hi nice video! I wanted to know if any of you have the same problem as me: Using the RANE ONE with the stems activated therefore serato dj pro version 3.x.x, on notebooks with AMD Ryzen 3, 12 GB of ram, shared integrated graphics card, ssd, etc. during playback the tracks seem to skip causing a lot of annoyance or causing the 2 tracks to lose synchronism, but disabling the turntable motors this does not happen (with active stems, instead with deactivated stems it seems not to happen), in fact on my other DJ controller without motorized turntable everything is fine. However, this defect seems not to occur on my 10 year old desktop PC, with AMD FX6300 processor 16GB RAM, dedicated graphics card 4GB RAM (I did some tests on it). Of course I optimized Windows 10 and 11, formatted, reset to factory settings, before doing all the tests, but the result didn't change.
I love mine bro!! 💯 The front knobs are crazy loose 4sure, I'm going to check your knob fix vid if I can find it.. Thanks for the insight and reflection. ☺
I still put the ns7 3 over the rane one and yes those knobs in the front move to easy ...I like the rane paddle effects but over all the ns7 3 was just fine
I have the ns7iii and bought the rane one! And I did not like the rane and returned it!!! So I'm happy with my Numark ns7iii!!! The best DJ tank I ever had!!! ❤️ Hopefully Numark will come put with NS4!!!? 🤔
I always hear about the Numark NS 7, but what's the use of having one if it's not compatible with serato or other software ? I did want one back jn the days
I love the mirrored layout of my NS7III. I use the cue buttons along the sides of the platters with my thumb. never realized how important the layout was until you mentioned it in your previous video. I would not recommend the Rane One for turntablists however, because the volume faders are way to stiff. Need to be able to quickly move those up and down. Great vid.
May I ask how much you sold your Numark NS7iii? And what condition it was? I have a new one with the screens. It has been sitting in storage in its case. Used it maybe 8-9 gigs.
Currently right now I own a Rev7 , s11 with 2x 1200 mk2..xdj-xz with denon sc6000s and a pair of 1210 mk5s. Also have a Denon Prime GO as well. The Rane One was on loan to me. I've owned cdj 3000s and 900 nexus 2 but sold them after a year of owning.
Platters are not symmetrical with the mixer. That is so awkward and would make juggling really weird it’s like they spaced the one on the left but the right platter is like pushed against the mixer section. Design fail. My Rev 7 blows this out of the water. Funnest controller I’ve ever played on
Ns7 series crushes all the these new motorized controllers to me.. Numark went all out with that... And these top tier pro gear companies... (Pioneer, Rane, Denon)... Damn near 15 years ago... Tho... Let that sink in... It took Rane & Pioneer this long like seriously... Ns7 series & V7 are tanks... Fully capable tanks. Numark will be the The one that has the sub $800 motorized controller... Let everyone get funky
You do realise that rane numark and denon all belong to the same cooperation and the rane one platters are pretty much based of the ns7 platters, same goes for the 6000m from denon
@@Presbiter Yeah... But they became the same company after 2016...Ns7 V7s was 2011 2012. Plus completely different build qualities... Ns7... 90% metal... Can't say the same about Denon & Rane... And they're supposed to be the upgrade... Top Tier Pro Gear. We're getting Shafted as consumers... As DJs we should know that. InMusic only been around since 2011. Numark Denon and Rane have been around longer than their parent company
The cool thing I found out about having 2 USB connections is you can use one for Serato and stream it's output to a second computer at the same time! Convenient if you stream online.
That's a great tip. I'll have to try that and make a video
Oh shit, I've never thought of this. That's dope.
Huh
Oh what a great idea
can we use it on a phone also as Audio Interface ?
Rev 7 can't run rekordbox lol. Only Serato
Yes I think he may have been mixed up wth Rekordbox and Serato..
Still, I find it very peculiar that a Pioneer product is not compatible with Pioneer software..
Exactly
You ca. Adjust it in the serato software where you can isolate each effect volume. You have to map your mic volumes in the front of the rane as a dedicated controller. There is alot of tutorials out there
I bought 2 cdj 3000’s, just decided to give them a try!😊
Absolutely love my Rane One. . I'm able to beat juggle, MC, scratch and use all my effects seamlessly during my sets.
Had the rane 72, terrible mixer, returned it after a week. Have the s11 now, different gravy
i have a sn7 3 and the Rane one ...rane one all the wayyyy !!!
I love my Rane one, I beat juggle a lot, and the platters are really good for it. There are only two things annoy me - I would much prefer the mirror start /stop, because my right hand accidentally hits start / stop when really quick juggling and also the crossfader does loosen up and also bounces quite easily.
Hi nice video! I wanted to know if any of you have the same problem as me: Using the RANE ONE with the stems activated therefore serato dj pro version 3.x.x, on notebooks with AMD Ryzen 3, 12 GB of ram, shared integrated graphics card, ssd, etc. during playback the tracks seem to skip causing a lot of annoyance or causing the 2 tracks to lose synchronism, but disabling the turntable motors this does not happen (with active stems, instead with deactivated stems it seems not to happen), in fact on my other DJ controller without motorized turntable everything is fine. However, this defect seems not to occur on my 10 year old desktop PC, with AMD FX6300 processor 16GB RAM, dedicated graphics card 4GB RAM (I did some tests on it). Of course I optimized Windows 10 and 11, formatted, reset to factory settings, before doing all the tests, but the result didn't change.
I don't know if I heard u right, Rev 7 its Serato Only maybe in the future may work with Rekordbox or not
I agree with you on the crossfader knob. It keeps loosening up. I had to put a piece of tape on it to keep it in place. Really annoying
I love mine bro!! 💯 The front knobs are crazy loose 4sure, I'm going to check your knob fix vid if I can find it.. Thanks for the insight and reflection. ☺
I still put the ns7 3 over the rane one and yes those knobs in the front move to easy ...I like the rane paddle effects but over all the ns7 3 was just fine
Ya my contour knobs move too I believe it from ur shirt or whatever rubbing on it and they move so easily just brushing will make them move.
Not from my shirt. Just from moving crossfader
I have the ns7iii and bought the rane one! And I did not like the rane and returned it!!! So I'm happy with my Numark ns7iii!!! The best DJ tank I ever had!!! ❤️ Hopefully Numark will come put with NS4!!!? 🤔
Rane One actually is ns7 4 on motherboard.
For the money I will only get the rane12s which you can use with rekordbox and dvs enabled mixer
I always hear about the Numark NS 7, but what's the use of having one if it's not compatible with serato or other software ? I did want one back jn the days
What do you think about the headphone volume and or split cue… I think the sound is lower and not enough punch compared to pioneer controllers.
Sorry but these gripes aren’t too valid dude the Rane one is a BEAST!!! But too each it’s own 🤙🏾
I love the mirrored layout of my NS7III. I use the cue buttons along the sides of the platters with my thumb. never realized how important the layout was until you mentioned it in your previous video. I would not recommend the Rane One for turntablists however, because the volume faders are way to stiff. Need to be able to quickly move those up and down. Great vid.
can't you loosen the faders?
@@machiventa858 no
May I ask how much you sold your Numark NS7iii? And what condition it was? I have a new one with the screens. It has been sitting in storage in its case. Used it maybe 8-9 gigs.
You can sell it for about $1000 to $800 depending on the condition...
I have a ns7ii. I can't use serato 3.0. It's outdated. At least with raneone it can handle serato 3.0.
What are you taking about the rev7 is for serato
Was explained already...late night video..I fucked up
.. lol
Can this be used with Traktor?
Great video man🔥🔥
The rev 7 is serato you got it the wrong way round 😂
Yep. I fucked up. Late night vid
@@TheDJLab hope you are well. Take care
This video sounds like you received a threatening cease and desist letter from inmusic 😆
Lol.. not at all. They have no problem with my opinions. Sometimes it takes time for a piece of gear to grow on me.
how much equipment do you have? Lol..please do a video showing your different setups
👍
Currently right now I own a Rev7 , s11 with 2x 1200 mk2..xdj-xz with denon sc6000s and a pair of 1210 mk5s. Also have a Denon Prime GO as well. The Rane One was on loan to me. I've owned cdj 3000s and 900 nexus 2 but sold them after a year of owning.
@@TheDJLab Holy Jesus!! haha.
how do you like the MK5s?
and why S11 over the S7?
Platters are not symmetrical with the mixer. That is so awkward and would make juggling really weird it’s like they spaced the one on the left but the right platter is like pushed against the mixer section. Design fail. My Rev 7 blows this out of the water. Funnest controller I’ve ever played on
Never even noticed that... good point
Only issue with Rev 7... platter start is not as strong as rane one
Rev7 built quality sucks! Looks and feels cheap! And this is coming from a pioneer user and owner!
You ever use one
Yes it didn’t feel as good as my Rane1
I own
Sx1,sx2,Srt,S11,S9,2-plx1000 I know good equipment!
Ns7 series crushes all the these new motorized controllers to me.. Numark went all out with that... And these top tier pro gear companies... (Pioneer, Rane, Denon)... Damn near 15 years ago... Tho... Let that sink in... It took Rane & Pioneer this long like seriously... Ns7 series & V7 are tanks... Fully capable tanks. Numark will be the The one that has the sub $800 motorized controller... Let everyone get funky
You do realise that rane numark and denon all belong to the same cooperation and the rane one platters are pretty much based of the ns7 platters, same goes for the 6000m from denon
@@Presbiter Yeah... But they became the same company after 2016...Ns7 V7s was 2011 2012. Plus completely different build qualities... Ns7... 90% metal... Can't say the same about Denon & Rane... And they're supposed to be the upgrade... Top Tier Pro Gear. We're getting Shafted as consumers... As DJs we should know that. InMusic only been around since 2011. Numark Denon and Rane have been around longer than their parent company
Rane One is the shit ✊🏾✊🏾✊🏾
Rane gosto the gigs. Nunark no. NS7 is bigger and 5 kg more.
my fave ddj sx3 sz2 1000srt is best
just wondering if you ever spun on vinyl records??
Yep.. still have 12s