VocAlign Project 5 | Getting Started in Logic Pro X
HTML-код
- Опубликовано: 5 авг 2024
- Understand how to use VocAlign Project 5 with Logic using an ARA Workflow!
For the Pro Tools Workflow, check this video - • VocAlign Project 5 | G...
VocAlign Project 5 (ONSALE TILL OCT 25, 2021) - www.synchroarts.com/products/...
VocAlign Project has been a staple in my editing for years. With Version 5, Syncroarts has taken it to a whole other level and made it much more user friendly, better sounding, and more accurate!
In this video I walk through the new layout, as well as my typical workflow using ARA in in Logic Pro X.
Song: Upcoming release from Sons of Horus
#vocalignproject5 #syncroarts #vocalediting
CHAPTERS
0:00 - Intro
0:37 - Setting Up the workflow
1:57 - Step 1 - The Guide
2:19 - The VocAlign Interface
3:51 - Step 2 - The Dubs
5:28 - Step 3 - The Settings
7:00 - Changing settings on different tracks
7:36 - Smart Align Overview
9:14 - Step 4 - Render, Bounce, Cleanup
10:06 - Thanks for watching!!
- - - - - - - -
CONNECT
Website - anakcreates.ca/
Mix Feedback - anakcreates.ca/mixfeedback
Podcast - ANAK Creates Podcast - anakcreates.ca/podcast
Instagram - / anakcreates
Twitter - / anakcreates
facebook - / anakcreates
thanks mate , maybe the clearest explanation of vocallign running on Logic Pro , so far
Glad it was helpful!!
Just got the update from Project 3 and this video was practically made for me! Well done!
Glad it helped out!!! Very easy workflow once ya get it figured out!
I watched this video again, because I purchased this plugin a few days ago, and it can help me to understand how to use it! Thanks a lot.
Awesome! Glad it was helpful!!
Right on time with this upload!
I'm glad it could help!!
Great job. Thanks!
Glad you found it helpful!!
Thank you very much...excellent stuff!🙂
Awesome!! Glad it was helpful!!
Thanks! That was very helpful.
Awesome! I’m so glad to hear that!!
Thanks man, super helpful
Awesome! Glad to hear it!!
great vid thx
Glad you enjoyed it!!
XCLNT. WELL DONE... THANK YOUUUUUUUUUUU
Awesome!! Glad it was helpful!!
🔥🔥🔥
Thank you!!!
Thnx a lot !!!! Very clear and to the point!! Question : When i choose Vocalign project 5 AU(ARA) in my logic pro 10.8.1 Rosetta It shows stereo not mono as it showed on your video and since I'm using a one voice track as my guide I 'm expecting to have the choice of mono as well .........by the way.. the .Vocalign project 5.AU gives me both stereo and dual/mono options . Any thoughts?
Glad it was helpful!! I was trying to look into your question and I am not sure what's going on there, that seems really strange!! Could be a really wierd bug or something, but not something I seem to find (Unfortunately I haven't had time to fire up Logic and look for myself on my end personally.) Hope it still works and gets the job done, will let you know if I find anything else out! So strange!!
Nice video! Ver helpful. Great stache as well. You look kinda like Butch Vig.
Thank you! Glad it was helpful! haha I'll take it!!
i wanted to give it a try again but one issue is coming up every time. I have one guide track and Left right unisono voxes that I want to allign. But only the left one is getting effected. So strange. I think I'm doing it right. ARA mode, plugin on every track, capture both etc...any tips? The right track is shown in the plugin when selected but its not getting the yellow corrected color that indicates the process...thanks
When you say a Left and Right, do you mean they are separate tracks or a stereo track? VocAlign will only effect one side of a stereo track, not both separately, so you’d need to have them on separate individual mono tracks. Does that help?
You said to put va5 on every track but you didn't show it. Did you put va5 on every dub track? Or just the one you showed?
In logic when I had them all selected, it did add it to everyone of the ones I had selected in one go. But yes, I add them to every track that I want to dub and alighn, then within once instance of the plugin you can view the different tracks by clicking the name on the VA timeline itself and you'll see the list of the other tracks that you can see.
Hope that helps!
This review would invite to purchase this app, if, yes if you would have given us a BEFORE and AFTER example. ??? Why no example?
Thanks for the feedback! Definitely a bit of an oversight on that apparently
Well, nevertheless I‘m thinking about buying it, although time doesn’t play a role for me, a hobby musician who doesn’t earn money with his music. That’s what my incomes with my songs on the streaming platforms tell me. My biggest problem in this matter: I‘m not a good singer and also not an experienced mixer, but I can’t spend money on professionals for that …
ruclips.net/channel/UCPWFDNrkQIkM5buhypafiaA
Love to hear it.. Why no demo ?
Totally, definitely bit of an oversight to actually record an audio demo of it! Thanks for that feedback!
can anyone help me i have vocalign project 5 the 14 days try i installed it on mc mini m2 version 13.4 but it says it is incompatible 😢
One thing to try out is see if running logic in Rosetta mode helps this? I know that there's some strangeness with VocAlign and Apple Silicon Native in Logic, it seems very strange, but see if that help??
@@ANAKCreates i going to Check it today if it does work, thank, i Will let you know if It work
Vocalign works perfectly in ProTools. I think it's Logic that's having the issues
Agreed, I personally like the workflow in PT much much better, and it’s where I use it 98% of the time due to that.
Just bought VocAlign Project 5, and under the Guide section it says Sidechain instead of Capture. I’m using Logic. What am I doing wrong? PLEASE HELP I LITERALLY CAN"T USE IT RN
I’ve heard about this before! Here’s a help article to help you, there’s a few different things with that so check this out and it should get you in the right direction - synchroarts.zendesk.com/hc/en-us/articles/4410018270231-I-don-t-see-a-Capture-Guide-button-in-VocAlign-Ultra-or-VocAlign-Project-5
Worked, had to switch to Rosetta.
So how do you get the tracks into the interface?and would of been nice see how you bounce it ..this pluckin is so frustrating!!! But thank you for sharing your awesome video
How to get the tracks into the Logic interface do you mean? Or into VA5? Just by putting the plugin on the tarck with the ARA technology it will be in the plugin automatically, that's why there's no other steps to really show on that workflow! It's quite convenient actually!
As for bouncing, I just turn off all plguins on the track after VA, then select your tracks you'd like to bounce and do "Bounce Tracks In Place" and they will each bounce and insert next to the original tracks, then you have to copy the other inserts over from the original tracks (not VA, but the other inserts you may have on there) and then either delete or turn off and hide the original VA tracks. It all depends on your workflow, some people don't really bounce them out and just leave them, but that's how I would do it myself!
I hope that helps a little bit further!! Working on doing more Logic tutorials in the future over on my website as well!
Thank you so much for your fast reply 🙏🏼🙏🏼..just shows how much you care about your content and the comments not like other people that put out same content as you .. you earned my like 👍..and I will subscribe and recommend to my friends
@@honkytonk2010 Of course! THank you so much, that's very kind of you! I really do appreciate the support!! Just trying to help how I can!
@@ANAKCreates I know that in Pro Tools the plugin interface actually has a "render" button on the output track. Is that just for pro tools, or does it appear on the non-ARA version of vocalign project 5? Feels like a time saver to do that rather than bounce all those tracks in place to new tracks and copy over all the plugins, then delete all the old tracks.
@@jkraus243 Yes, this is one of the reasons I personally like the Pro Tools workflow better because you are absolutely correct, and is a bit of a pain. Unfortunately there is no way to do the same workflow like this in Logic with the Non-ARA method (which is realtime capture and still requires bouncing in the same way. I don't have a good workaround for this in logic to share yet unfortunately!
I don't have the CAPTURE option for the Guide Track. It says SIDECHAIN. Please advise...
PLEASE BE ADVISED: After a little bit of research, I discovered that you must run Logic in Rosetta on Silicon Macs in order for the ARA version to run properly.
Yes! So the "Sidechain" showing up is meaning that you are using the "realtime audiosuite" version instead of the ARA version. Does switching it to Rosetta mode work for you? from my research so far, Syncro Arts doesn't seem to have Project 5 ARA version in Apple Silicon native compatible yet, but I could be missing something. Which makes sense that it would work properly in Rosetta mode. Annoying, but hopefully they will fix it soon.
Here's a link to their page on how to use the AudioSuite version at least - www.synchroarts.com/AppSupport/VocAlignProjectV5/Manual/HTML/vocalign-project-quick-start-guide-for-logic-pro-x.html
@@ANAKCreates Yes, switching to Rosetta completely resolved the issue. Thank you.
@@good4sound Awesome, glad to hear it!!
First off, Thank you for making this video!
I'm curious if anyone else is running into this issue.... I have my vocal comps bounced in place (so everything shows up in one merged region). Using vocalign as the only plugin on the lead (and stacked) tracks, I capture guides and dubs. Immediately after, the captured tracks are muted. They aren't muted in the sense that the regions are grayed out. They are muted as in - they look normal - but produce no sound. Anyone else having issues?
Using Vocalign Project 5 ARA with Logic Pro X 10.7.2
Glad you enjoyed it!!
That sounds like a very wierd bug. I can't say I have encountered that, or can think of a workaround for it, but maybe someone else has! Have you tried taking the plugin off, restarting logic and then doing it again? Seems like they are getting into VAP but VAP isn't actually allowing them to come out again, strange.
If I think of anything else or find any answers to this I will be sure to let you know!
@@ANAKCreates Thanks for the response. I will continue to trouble shoot!
@@KyleJung any possibility this is a phase issue?
did you ever figure this out?
I was not able to installed it, can somebody help, please?
What was the problem when you installed it? What happened? And what is your OS, DAW, and any other info that might help
@@ANAKCreates tahnk you for asking, appreciated!
So, I run old Mac Pro Tower 2012, Catalina 10.15.5 and Logic pro x 10.6.0
The instalation process is going well but after its install I can see it in driver or anywhere else.
@@florin1290 Hmm very strange. Try re-downloading the installer and doing it again, make sure you select all the different formats that it will install (just to be safe) and then re-load logic after the install as well. You may need to refresh the plugins list as well (using the plugin manager). That version of the logic and Mac OS should work tho, so it's not an incompatibility issue.
why don't I have the ARA option??
Do you know what version of Logic you are running and what OS??
@@ANAKCreates I figured it out. You can’t put an ARA plug-in at the bottom of your chain, it has to be your first insert.
Ahh yes, glad ya got it!
please react to oblivion by Grimes! :)
Thanks for the suggestion!!
Without the artifacts etc it would be nice. But this way I use the time for making it musically on my own,,,
Totally, it's improved a ton, depending on the music if's easier to get away with, other times not as much!
So you are saying, its not sound very good?? Would Ultra be better??
@@magnuseriksson8081 if you’re asking me, it’s not about the sound. I don’t like plugins that change a lot and pretend to speed up my workflow but at the end you need to take care of other added things. In this case the artefacts that can easily appear. Short, I can’t really rely on this plug…my opinion
This Vocalign 5 sucks ass!
Screwed up my Mac, even with Rosetta opening it.. this plug in cost me $149 with no return just to screw up my beautiful Mac and kill my creative flow for the day!
Logic stock aligning leaves clicks & pops now this bs plug in won’t work for every Mac, especially mine.
Major bullshit for creators trying to get a professional sound.
GRRRR then it wouldn’t let me uninstall it, acted like a virus program that overloaded a 64GB Mac Studio then refused to go away!
I was so excited to get it until it glitched me to pissy frustration-Capture button vanished after going through Hell to get it to appear..why sell something like this with a no money back guarantee? Cause it doesn’t work half the time.
It’s challenging enough to create let alone have to they’re the dice hoping it works.
As if I had $149 to burn.
This is why I don’t buy plug ins
Sorry to hear you had such crap luck with it!! I have been using it for years, and have used almosnt all the plugins those guys make and have never had it that bad. I know there are some wierd workarounds sometimes, but once i've figured them out it's great.
Would love to see if there's a way to fix it, what MacOS are you running/version of logic? and are you running VocAlign Project 5 or which version of VA??