Golf 4 cluster swap

Поделиться
HTML-код

Комментарии •

  • @3bbad
    @3bbad 2 года назад +1

    did you solved the airbag warning light? I couldn't. The light pop up each time the car start.

  • @mehmetgurcay4268
    @mehmetgurcay4268 Год назад

    I have a 2000 model Audi A4. Since I changed the indicator, can I start the vehicle with the imbo locked vag k+car device without needing vag com?

  • @MegaZENC
    @MegaZENC 4 года назад +3

    Hi Tony, was the initial code you input, the soft coding of the original cluster?

    • @tonybig78
      @tonybig78  4 года назад +1

      MegaZENC no it’s the pin you need both from donor and current clocks or you need to get vagtacho to extract from both

  • @DJEvoIX
    @DJEvoIX 11 дней назад

    And how you code 2 Keys? Thx

    • @tonybig78
      @tonybig78  10 дней назад

      @@DJEvoIX for golf 4 keys I use vag tacho

  • @danielwilliams14
    @danielwilliams14 4 года назад +1

    Hi, was the first pin your car pin or new cluster pin? I have both for my cluster swap but need to know what order to put them in?

  • @YOCOSMINMAX16
    @YOCOSMINMAX16 5 лет назад +1

    I have to do the same Coding with 2,1, 0 on codes?

  • @StepanSladky
    @StepanSladky 5 лет назад +11

    Where did you get those numbers you were writing in ? Is it on the cluster ?

    • @UNINVITED66
      @UNINVITED66 3 года назад +1

      you need a reader . take out the eeprom from IC and you have to find the pin. If you buy new IC they give you the pin

  • @beniaminmuntean
    @beniaminmuntean 9 месяцев назад

    Hii a have Audi a4 b8 2009 as safe mod cluster can’t help me

  • @thalissongamer
    @thalissongamer 10 месяцев назад

    Hello friend, is the value 07624 that you used in immobilizer - vehicle data learning standard for all golf 4 or do I need to extract this value from somewhere else? I already have the immo value of my car.

    • @tonybig78
      @tonybig78  10 месяцев назад

      Each cluster has a different PIN code mate you need to extract it with vag tacho

  • @declanelliottmason5682
    @declanelliottmason5682 4 года назад +2

    Where did you get your original car pin number and donor number from the car the cluster came out of? No idea where to start looking👍

    • @tonybig78
      @tonybig78  4 года назад +2

      Declan Elliott Mason vag tacho can extract pins

    • @robertc9140
      @robertc9140 4 года назад

      Where did you get your vag tacho?

    • @tonybig78
      @tonybig78  4 года назад

      Robert Charlie eBay mate it’s like a tenner

  • @doroad.oneseven
    @doroad.oneseven 10 месяцев назад

    Hello mate, how do you get rid of the airbag warning?

    • @tonybig78
      @tonybig78  10 месяцев назад

      Fix it or put resistor. Airbag is safety feature you cannot turn it off

    • @doroad.oneseven
      @doroad.oneseven 10 месяцев назад

      Yeah, but how can you fix it? I mean it appeared when I changed the cluster@@tonybig78

    • @doroad.oneseven
      @doroad.oneseven 10 месяцев назад

      @@tonybig78 yeah but it popped up after the cluster swap. Did you have a faulty connector when you recorded or was it cause of the cluster change?

    • @tonybig78
      @tonybig78  10 месяцев назад

      @@doroad.oneseven just needs resetting after the swap.

    • @doroad.oneseven
      @doroad.oneseven 10 месяцев назад

      @@tonybig78 you do that with vagcom or button combo on the dash?

  • @nebunoaizer
    @nebunoaizer 4 года назад +3

    You didn't said anything about the procedure. You're just doing something that we don't know. What if I don't have the original PIN number of my car. What should I do?

    • @tonybig78
      @tonybig78  4 года назад

      Well just because you don’t know doesn’t mean other people don’t either! 17000 views must mean something.

    • @FleX123
      @FleX123 3 года назад

      @@tonybig78 i dont know too, what to do? i dont have any manual or something with the car..

  • @JayJayProd
    @JayJayProd Год назад

    It will work in octavia 1 2003 fl?😮

    • @tonybig78
      @tonybig78  Год назад

      Should be same procedure but you will need to extract PIN number from both cluster new and old

  • @OUULOUIS21
    @OUULOUIS21 Год назад

    what was the first pin you entered to login what was that off?

    • @tonybig78
      @tonybig78  Год назад

      That’s irrelevant the code isn’t going to be the same for you.

    • @OUULOUIS21
      @OUULOUIS21 Год назад

      @@tonybig78 i’m aware of that bud, i’m asking what code is for what order is the new cluster pin first or is it the old one

    • @tonybig78
      @tonybig78  Год назад

      @@OUULOUIS21 old pin first. Follow instructions on vcds website.

  • @Lessthanthreeedm
    @Lessthanthreeedm 6 лет назад +3

    Do you need to program the new cluster for the functions like air temp, miles to empty, ect to work? I've swapped my old no screen cluster into MFA bora sport one but it's not displaying any info.

    • @tonybig78
      @tonybig78  4 года назад

      Tagic Mrooper yes you do

  • @ScamaMar
    @ScamaMar 10 месяцев назад

    how did you find the Login code?

    • @tonybig78
      @tonybig78  10 месяцев назад

      Please read previous comments I cannot keep answering same question over and over again

  • @Ragaaci
    @Ragaaci 3 года назад

    Whats that scary last sound?

    • @tonybig78
      @tonybig78  3 года назад +2

      Sticky starter motor

    • @nHqq
      @nHqq 3 года назад +1

      @@tonybig78 i got the same sound. Is it fixable or will i have to replace starter? Ps : no issues at all. Only the sound

    • @tonybig78
      @tonybig78  3 года назад

      @@nHqq it’s totally normal don’t worry about it.

    • @nHqq
      @nHqq 3 года назад

      @@tonybig78 how can be normal? 😂

  • @cioskygaragel.a.p.3976
    @cioskygaragel.a.p.3976 2 года назад

    Ciao ,vedo che scrivi in italiano ... Grazie per i video volevo una informazione dato che non trovo una informazione adeguata su passat b5 è possibile attivare con vcds l'opzione di check lancette ...?
    Grazie 😉

    • @tonybig78
      @tonybig78  2 года назад

      Buongiorno sfortunatamente no

    • @cioskygaragel.a.p.3976
      @cioskygaragel.a.p.3976 2 года назад

      @@tonybig78 grazie, allora va solo modificato aprendo il cruscotto...
      Ciao😉

    • @tonybig78
      @tonybig78  2 года назад

      @@cioskygaragel.a.p.3976 nel tuo caso nemmeno così facendo. Era una cosa che si poteva fare solo su alcuni cluster della golf e bora.

  • @raulchavezvw5610
    @raulchavezvw5610 2 года назад

    Cómo obtuviste el pin code ?

    • @tonybig78
      @tonybig78  2 года назад

      Vagtacho

    • @andreax5224
      @andreax5224 2 года назад

      @@tonybig78 ciao tony i codici che hai messo vanno bene anche per altri tachimetri golf 4 ?

    • @tonybig78
      @tonybig78  2 года назад +1

      @@andreax5224 ciao no ti serve vag tacho per trovarlo

    • @andreax5224
      @andreax5224 2 года назад

      @@tonybig78 e come faccio quando entrò nel sito è in inglese

    • @tonybig78
      @tonybig78  2 года назад

      @@andreax5224 ma non è un sito e un cavo clone che ti serve per estrarre il pin. Ti serve anche vcds.

  • @milos96ify
    @milos96ify 3 года назад

    where I can read the old skc code?

    • @tonybig78
      @tonybig78  3 года назад +1

      You need vagtacho or similar

  • @marcin-_
    @marcin-_ 10 месяцев назад

    Where you get code 07624 on channel 50?

    • @tonybig78
      @tonybig78  10 месяцев назад

      Read previous comments

    • @marcin-_
      @marcin-_ 10 месяцев назад +1

      @@tonybig78 I found: Old cluster pin. :) Thx.

  • @squid3567
    @squid3567 2 года назад

    Is it working on golf5?

    • @tonybig78
      @tonybig78  2 года назад +1

      Nope you need different software and cable for mk5 and depending on what year yours it might need Avdi or xprog

    • @squid3567
      @squid3567 2 года назад

      @@tonybig78 what cable? I have hex v2 , its 2010 btw

    • @tonybig78
      @tonybig78  2 года назад +1

      @@squid3567 hex v2 is just for diagnostics. What are you trying to do? Swap cluster on mk5 golf?

    • @squid3567
      @squid3567 2 года назад

      @@tonybig78 yess

    • @tonybig78
      @tonybig78  2 года назад +1

      @@squid3567 you can use vag can commander if both cluster are old ones. If not your stuck. Need xprog

  • @remo19811
    @remo19811 2 года назад

    Ciao senti per favore si pou fare su una audi a3 2.0 tfsi del 2005 e se si puo devo prima prendere vagtacho e c’è ne sono di due codici esatto grazie

    • @tonybig78
      @tonybig78  2 года назад

      Scusa ma il titolo dice golf 4. A3 8p e totalmente un altro procedimento ed un altro cavo con software

  • @malimuha5249
    @malimuha5249 5 лет назад

    Can you help me with my project i have the same cluster and need to swap it with the old one?

  • @matteomichele9800
    @matteomichele9800 3 года назад

    ciao sai anche come cambiare la visualizzazione del computer di bordo da l/km a km/l e su come visualizzare i km di autonomia residua?

    • @tonybig78
      @tonybig78  3 года назад

      Certo con vcds fai la prima parte per la seconda vedi Google mk4 golf mte ti serve un cavo chiamato vag Tacho

  • @Benko_DieseL
    @Benko_DieseL 6 лет назад

    how did you done that?

    • @tonybig78
      @tonybig78  6 лет назад

      What do you mean?

    • @Benko_DieseL
      @Benko_DieseL 6 лет назад

      how did you make does needles swap?
      can i do it on a passat b6 year 2006?

    • @tonybig78
      @tonybig78  6 лет назад

      I don't think you can sorry!

    • @yourname-nr4lh
      @yourname-nr4lh 4 года назад

      Benko znas li sad? 😂😂

  • @khalidfreesmile7386
    @khalidfreesmile7386 4 года назад +1

    Guys don’t take the risk because he didn’t make anything related to needles sweep , just immo , and if u are not good player with immo the car WON’T START! Don’t take the risk

    • @tonybig78
      @tonybig78  4 года назад +2

      Where did you read anything related to needle sweep? Title says cluster swap not needle sweep learn to read!

    • @Qpangmoviemaster
      @Qpangmoviemaster 3 года назад

      Dump ass nothing related to needle sweep only immo

  • @pierpaoloenduro6652
    @pierpaoloenduro6652 4 года назад

    Ciao, vorrei sapere dove è possibile acquistare il vag e il software in italiano, grazie

    • @tonybig78
      @tonybig78  4 года назад

      Non so se eBay Italia ne ha altrimenti AliExpress

    • @pierpaoloenduro6652
      @pierpaoloenduro6652 4 года назад

      @@tonybig78 si ce ne sono ma leggendo su vari forum si dice che alcuni non originali come quelli che si trovano su ebay possono causare danni alle centraline (come per esempio bruciarle)

    • @tonybig78
      @tonybig78  4 года назад

      Pierpaolo Enduro ma no io non ne ho Mai avuto uno originale e sono 20 anni che li uso! Ti serve vcds e non vag-com. La versione va in base l’anno e mese cioè 19.2 e valido per macchine fino al 2019 mese febbraio. Detto questo lo puoi usare comunque l’unico problema è che avvolte non ha il codice nel programme quindi devi usare Google.

    • @pierpaoloenduro6652
      @pierpaoloenduro6652 4 года назад

      @@tonybig78 capito. Se mi puoi aiutare e consigliare qualche link d acqusito te ne sono grato. Io ho una golf 4 del 2003

    • @tonybig78
      @tonybig78  4 года назад

      Pierpaolo Enduro se hai una golf 4 va bene anche il vecchio tipo cioè vag com. Il software che devi cercare e vcds lite cerca in giro c’è una versione già attivata.

  • @JVC_Official
    @JVC_Official 4 года назад +1

    Tony Montana? :D

  • @aurelianhosu9966
    @aurelianhosu9966 3 года назад

    Ciao mi poi mandare il. Tuo nr vorrei chiederti dei consigli riguardo alle codifiche...

    • @tonybig78
      @tonybig78  3 года назад

      Ciao dimmi come ti posso aiutare?

  • @robniblett6625
    @robniblett6625 3 года назад +3

    About as helpful as a chocolate fire guard.

  • @aleksandrogienko3371
    @aleksandrogienko3371 2 года назад

    Super

  • @cristianalin5081
    @cristianalin5081 3 года назад

    Nu e bun codul