❤ was hoping to get a link or number are you adjust the website of getting a hold of that guy to see if he can do my set up for the 2003 six but appreciate it a lot. If anybody out there has that please send it my way
This is a j37A4 80mm throttle body. Yes will fit 3.0 only intake manifold and throttle you need to use your runners. Contact him @@chony1703 smpperformance
Sorry I have a question, I have a Honda Accord V6 J35Z3 and it broke down but I can't find that engine. Can you put another of the j35 family? And what could it be
@@theaccordman2074 thanks for the reply. I've been thinking if I should try it out for my TL. I made 283/251 with intake, pcd and jpipe. So hopefully I can get close or hit 300 with a holly and some injectors if needed
I really don't understand the hype. You can buy a complete j30a5 shipped from Japan for 900, and man buys a intake head for 700 calls it a deal? It's not even bigger I could take my stock head and paint it and smooth the bores call it a day, it'd be the same.
J30a5 came with magnesium intake manifold(way heavy) and the throttle is 68mm. This kit is a j37A4 Intake manifold aluminum for control the heat soak and 80mm throttle. Japan engines are rated less hp. So go buy it and see you in the streets🤦♂️🤦♂️🤣🤣. There's always ppl like you talking shit without any builds or even car. But I like it cuz you putting atention on my stuff. Ignorants haters talkers etc. Keep going and look for Jesus he can help you to be better person.
@@theaccordman2074 wasn't trying to hate just really didn't understand what was different about the head you bought. It looks identical to the one on my car but red. The Acura TL head is actually bigger being made for the 3.5, and magnesium does alot less heat soaking then aluminum? does that make the extra weight worth it?
God Bless Brother. I have an 07 TL Type S 6MT that I want to start modifying. Its completely stock right now. Would you still recommend this kit or is there something else you would recommend now? Or is there a different mod you would recommend as mu first mod? I appreciate your advice brother.
@@theaccordman2074 know there is 4 variants of the j37 though. Mdx being the A1. I assume this shouldn't really matter. Maybe a slight tune needed if available? Thanks for help.
Thanks for trusting in us and are work brother, God bless you
Does this fit the j35a4? If so is there a link to this particular package?
@@lancedamnen I think it fits
I want this so bad fml.
Just give me a few months lol I just gotta do a few other things first.
Nice. Very nice. Does this fit J35y2?
@@theaccordman2074 i have a j30a4 how does it work ? I send my stuff and gig port it ?
Amen hermano, gloria Jesus Cristo! Quando vamos a ver some pulls?
Smp does some great work
Man lol watching you 😂 open this stuff gave me anxiety
Me too that's too funny.
Like a kid on Christmas day
That will fit a mdx 2007?
Yes
@@theaccordman2074 i need it lol
yeah guesss ima b shopping very very soon!!
Hey Brother can u please send me the Link where to purchase 4 my 04 Honda v6. Thanks🙏🙏
Chony1703 instagram
❤ was hoping to get a link or number are you adjust the website of getting a hold of that guy to see if he can do my set up for the 2003 six but appreciate it a lot. If anybody out there has that please send it my way
Link for what?
❤ is that set up only 03 v6 Dose he do this work for the 2000 v6 3.0 accord and how much
This is a j37A4 80mm throttle body. Yes will fit 3.0 only intake manifold and throttle you need to use your runners. Contact him @@chony1703 smpperformance
Hello dude nice set up.
Does he have the same for a 8 Gen accord v6. God bless you brother!!!
Yes
@@theaccordman2074 thank you
I have an accord myself. J32 swap in Lancaster.
Great 1 day we can meet
God bless brother
Thanks toni.
That's a sick manifold, can i put that on my 3.7 swap without doing any mods ?
Yes, I recommend period camshafts bc or halferland with valve springs.
@@theaccordman2074 so you can’t just bolt this on and go? We also need the cam shafts?
We’re can I get this whole kit
Take my money pls
Your money?
I thought you bought the runners from p2r?
First time yes
@@theaccordman2074 can I buy them off you
@@theaccordman2074 your intake manifold and throttle body did you have to send it in or did you buy everything for 700 bucks
@@jacksan8026 talk to him. IG chony1703
@@jacksan8026 I sold em already
car porn lol
🤔🤔??
Does this bolt directly on a j30a4?
Yes
@@theaccordman2074 thnks
Same for j30a1?
Great question now what's the link for us to purchase it also
Niceeeeee. P2R seems to be the place to go these days.
Beautiful work!!!
instagram.com/chony1703?
I have to admit for all that work and parts $700 is damn cheap
And the paint job is free. My air flow increases by 27%
Right
Do you need a tune or bolts on
@user-xg4ld4my2p tune and bolt ons will help you alot.
@@theaccordman2074 okay did the car already had a tune already or was it factory tune when you added the parts
Sorry I have a question, I have a Honda Accord V6 J35Z3 and it broke down but I can't find that engine. Can you put another of the j35 family? And what could it be
Your options are
J37a1 2010 to 2012
J37a2
J37a4
You can't use older engines due your cats and tranny new housing
How do you like the holly vs this manifold? Which is better for your setup
Well with smp intake kit I make 14whp when I put the holley makes another 15whp
@@theaccordman2074 thanks for the reply. I've been thinking if I should try it out for my TL. I made 283/251 with intake, pcd and jpipe. So hopefully I can get close or hit 300 with a holly and some injectors if needed
@@j.stresstl182 without tuned?
@@j.stresstl182 if you dont have camshafts go with smp kit. Holley you will need cams and tuned to get good gains
@@theaccordman2074 no I'm tuned. Check my videos if you have a chance. Thank you
How do i get it i dont have Instagram
Shawn Martinez fb
@theaccordman2074 well I be needing a handata with this or stock ecu at the moment ok?
@theaccordman2074 I can't find him on fb I need this kit..
Does your car have the intake manifold actuator I see the manifold actuator on the s&p did you do any modifications or did you remove it?
Is there
I really don't understand the hype. You can buy a complete j30a5 shipped from Japan for 900, and man buys a intake head for 700 calls it a deal? It's not even bigger I could take my stock head and paint it and smooth the bores call it a day, it'd be the same.
J30a5 came with magnesium intake manifold(way heavy) and the throttle is 68mm. This kit is a j37A4 Intake manifold aluminum for control the heat soak and 80mm throttle. Japan engines are rated less hp. So go buy it and see you in the streets🤦♂️🤦♂️🤣🤣. There's always ppl like you talking shit without any builds or even car. But I like it cuz you putting atention on my stuff. Ignorants haters talkers etc. Keep going and look for Jesus he can help you to be better person.
@@theaccordman2074 wasn't trying to hate just really didn't understand what was different about the head you bought. It looks identical to the one on my car but red. The Acura TL head is actually bigger being made for the 3.5, and magnesium does alot less heat soaking then aluminum? does that make the extra weight worth it?
@@williamalexander2646 keep building your shit and be happy. God bless
Would this fit in my auto 08 TL Type S ? Do you have a link.
Yes will fit
instagram.com/chony1703?igshid=YmMyMTA2M2Y=
Is the red coat with the black cover still available?
Yes contact @chony1703 ig
God Bless Brother. I have an 07 TL Type S 6MT that I want to start modifying. Its completely stock right now. Would you still recommend this kit or is there something else you would recommend now? Or is there a different mod you would recommend as mu first mod? I appreciate your advice brother.
Yes these and a halferland cams will give you good power but remember you need the hondata flashpro.
@theaccordman2074 Got it, thanks for the suggestions brother. Would any of these mods not let me pass smog since I live in cali?
@@Pasun19 I don't know
@@Pasun19 when I live in cali I pay 500 for my smog so be aware fast pay alot in smog. Slow pass smog
@theaccordman2074 Gotcha, I'll keep that in mind brother. Thank you!
Any benefits putting on my 32a2?
Won't fit due yours is drive by wire. This one is electronic
@@theaccordman2074 drive by "wire" IS electronic... Drive by cable is the older style direct connection to your throttle pedal.
Beautiful. Does this work on J35y2? Thank you.
If im not wrong YES
@@theaccordman2074 Thanks.
👍 🤔 . . This work on a 2012 mdx? THE 3.7L
Yes
Actually this intake manifold is from 2012
@@theaccordman2074 know there is 4 variants of the j37 though. Mdx being the A1. I assume this shouldn't really matter. Maybe a slight tune needed if available? Thanks for help.
@@jasonmarkwell8593 well yes j37a1 2007-2009 is the small throttle body and is not magnesium intake. The j37a1 2010 2012 is 3rd gen JSERIES
How did you reach out to them?
The instagram link is on the description
Where can I get it all of it!
Chony1703 IG
I sent you a message on ig
Can you post link to these items?
instagram.com/chony1703?
Can I but this on my j30??
Yes direct bolt on
What car model is it from.?
Where can I find these to order.
instagram.com/chony1703?
Contact him
How can I buy this my man
I'm going to sell my top intake for 400. No throttle or runner.
You can contact chony1703 IG to get the whole thing for 700
@@theaccordman2074 why are u selling it brother?
@@jacksan8026 going holley. But is sold already
@@theaccordman2074 ok thanks brother I'm waiting for your next video
Is the top cover carbon fiber, or 3D printed? It's slick!
3d printed