As always with Matthias you learn something new, and in a quick, concise, and comprehensible manner.Thank you for this helpful advice, it's very much appreciated. :)
Thank you a lot. Congratulations for each video of your channel... All your tutorials are amazing. I am from Venezuela and I have a carpentry channel in spanish and I have learned a lot with you and your channel. Thank you Matthias.
Great video! I think the layers are the most powerful feature of Sketchup. I make it a rule that everything in my Sketchup model is in a layer other than layer 0. This system works especially well if you are working on anything that resembles a box (including a drawing of a room). By assigning a layer to each side, I can quickly see anything inside the box without making special views by simply turning off layers. If you ponder this, you’ll realize that exploded views are not really necessary.
Hi Matthias - Nice video, which I saw years ago and just reviewed again. Used this to create a side view scene for a small woodworking project, saved that as a tif file, then used your BigPrint program to make the calibrated paper template. You're stuff is really useful!
Thank you MAtthias Wandel...you are a great TEACHER.. precise words matching whats shown on the screen.. very easy to understand..you are doing a favour to engineering student community.. i am recommending these to all my students.. great job..thanks once again..
Matthias , примите мою благодарность за урок : " Using scenes and layers " . Хотя язык я не знаю, но достаточно доходчиво и без понимания языка. Я уже в течение нескольких месяцев наблюдаю и учусь у Вас по конструированию станков и приспособлений к ним , а теперь вот и в проектировании. Иван. Украина.
Oh, that is always a tough one. I used "microsoft video 1" in camstudio. But then the whole thing got re-encoded after editing with a different codec! A key to making it look nice is to capture at the same resolution and keep that throughout. In my case 1280x720
Thank you for clarifying this. I was banging my head on the wall trying to figure it out. I still wish there was a 3d program out there that would do a dimensioned layout of my solid models, like SolidWorks, but actually affordable. Sketchup Pro with Layout can, but apparently it doesn't even do dashed hidden lines without convoluted workarounds with semi satisfactory results, or needing plugins for something that should already be there. I've been making my models on Sketchup and then redrawing layouts on cad, which takes a serious amount of time.
Microphone was next to the keyboard, and the vibration transfer qutie well. It's really not that loud in real life. but the sound is kind of cool in the video.
Using 2017 version? Scenes are located under the "windows" tab, then hover over the drop down "default tray"menu and tic "scenes" to enable them to appear in the tray. Next, look near the bottom of the default tray (right side panel by default) and click the "+" to add a scene.
Hi, thanks for your tutorial. If you want to change something in your design and have already made the scenes, you have to recopy the modified object in every scene? I am new to sketchup, but it would be interesting to have scenes that are relatives to the main scene. i.e. they don't display different objects, they just apply a serie of transformations to the main scene. Do you know if other CAD software work that way?
Ok, I think I got my answer. You can make the table (or its parts) into a component(s) . If you copy a component, modification made to one will reflect on the others.
I've followed your first two videos on creating the table. I can't find the video where you round off the corners of the table top. The last one I watched was creating the mortise and tenon joints. Can you point me in the right direction of that video?
I come up with 17,600 RPM. Given the 4" dia x 3.14 = cir of 12.5" To keep it easy I left it at 12". At 17600 RPM the rotation would complete 3.33 miles every minute. Multiply that by 60 and you get your 200 MPH. Now since I took off the .5 " you actually can go a little bit slower RPM than that to obtain the 200 MPH.
Hi Mathias. Excellent tutorial. I have one problem that you may be able to help. When I copy my model to use to pull apart, the original model also gets pulled apart. Do you know how to prevent this happening? Thanks.
16807 RPM to get the outer surface of the log to spin at 200 mph. Here is the math: circumference of log is 12.5667, so 1 rev goes 12.5667 in. 1 mile is 63360 inches, 200 mph is 12,672,000 inches/hr, or 211,200 inches/minute, since 1 revolution is 12.5667 you need 16807 revolutions per minute to get 200 MPH.
Hi man, good video. But I've got a question, I'm using the Sketchup pro 2017, when I click in the main or the copy to select "ENTITY INFO", the window doesn't appear, I need to do the same as you did with the component, there is another option to get this window?
I just find the answer, there is a panel avalable to make this, is not a tab in these new versión. but I've got another question, when I move the assembly, appears a message that says: the layer will be combined whit another hidden layer. Do you kwon how can I move the assebly layer to the original possition without be combined?, Thanks for your time
I think this is the best and I tried pretty much all of the others. However, I kept seeing my text and dimensions from my "Assembly" appear in my "Main" scene. I did not grasp at first, that text and dimensions are entities and all entities must be selected and put on a specific layer. I prefer not to click the layers button to the left (which I understand can present problems). For me it is best to just select every dimension and/or text and choose the layer for it in the entities info box (safer)
unfortunately they have changed location of all the layers and scenes stuff in sketchup make 2016 .... very hard to find. But despite locating them, and watching this video countless times, nothing seems to work quite the same.... despite your wonderfully structured and clear explanations .... because they've introduced more nomenclature like trays, that makes it even more confusing. I finally got it to work, but ... yeesh!
Never mind how many times I set a scene to display only one layer, and update the scene, then the other, attempting to emulate what you're doing here, when ever I go and toggle between scene 1 and scene 2 afterwards sketchup always adds another layer to the display regardless of the updated settings, messing things up. And if I hide the table top in the assembly view, never mind what, it will also disappear in the main view. It's exasperating.
I am having the same issue. It works best if there is nothing on layer0. It will preserve the layers but adds layer0 back every time. I am going try adding a layer right a the beginning before drawing anything.
My idea below worked. Using entity info I moved the whole object to the main layer, leaving layer0 empty. Now all is working like the video. It seems 2016 will always add layer0 back into the scene after toggle.
I've been through this over & over. If I put the original copy on Layer Main & the duplicate on Layer Assembly, when I make a Scene showing only Layer Main, that's what happens, but when I make a Scene showing only Layer Assembly, when I switch to the 1st Scene showing only Layer Main & then back to the Scene showing only Layer Assembly, it always shows both Layers.
Sounds like you may need to add another layer for each section. Start with layer 0 and build the whole project. Then work layer by layer and scene by scene.
Superb video Mathias, however if you can place your mic directly under the key board, each of those irritating key stroke clatters can become absolutely maddening.
The whole idea was to either prove or diprove the 200 mph duct tape. My lathe won't turn that fast. I was going to do an inside out turning with 4 pieces of wood or maybe 9 pieces. I didn't want to use a lot of glue and wanted to try duct tape and just tape the ends. I'd still have to use some glue on the ends because the wood could shift a little bit with just duct tape. But it's a moot point now.
@@adammacer Scenes are now located on 2017 version under the "windows" tab, then the pull down "default tray" to enable them to appear in the tray. Look near the bottom of the tray (right side panel by default) and click the "+" to add a scene.
Very impressive. It would be better for beginners if you showed your actual operations in detail. You often quickly go through three different keystrokes, calmly saying the overall operation yet failing to specify HOW you are doing it. This makes the video good for experts but harder for newbies.
+Matthias Wandel Thanks for taking the time to respond. SInce I am myself new to Sketchup, I am trying to absorb a lot and appreciate all the help I can get. But I understand your point. Once the sequence of operations is learned well, it seems pointless and tedious to express all the steps.
I work with the pause video button all the time, have sketchup running in the background to replicate the steps, and, if needed, spool the video back again and again until I get what's going on. Compared to a lot of the videos on this site, these are wonderfully well structured and explained i.m.o.
Absolutely true. I just gave up watching a series of tutorials after 3 videos because the functions were re -explained each time. Painful. What's the point in having a series of videos if you go back to basics each time and you can't have one long video because ... oh what was I saying?
WHY has it taken me so long to come across this video? Thanks Matthias, this is going to save me so much time!
As always with Matthias you learn something new, and in a quick, concise, and comprehensible manner.Thank you for this helpful advice, it's very much appreciated. :)
Excellent tutorial, fast and straight to the point, the audio is great too.
Thank you a lot. Congratulations for each video of your channel... All your tutorials are amazing. I am from Venezuela and I have a carpentry channel in spanish and I have learned a lot with you and your channel. Thank you Matthias.
Excellent Matthias!! I love the way you have to explain things with such details and so clearly. Many thanks!
Great video!
I think the layers are the most powerful feature of Sketchup. I make it a rule that everything in my Sketchup model is in a layer other than layer 0. This system works especially well if you are working on anything that resembles a box (including a drawing of a room). By assigning a layer to each side, I can quickly see anything inside the box without making special views by simply turning off layers. If you ponder this, you’ll realize that exploded views are not really necessary.
Fantastic tutorial on advanced sketchup stuff Matthias! Really makes sketchup so much more useful!
Hi Matthias - Nice video, which I saw years ago and just reviewed again. Used this to create a side view scene for a small woodworking project, saved that as a tif file, then used your BigPrint program to make the calibrated paper template. You're stuff is really useful!
Thank you MAtthias Wandel...you are a great TEACHER.. precise words matching whats shown on the screen.. very easy to understand..you are doing a favour to engineering student community.. i am recommending these to all my students.. great job..thanks once again..
Thanks Matthias, your tutorial is really helpful and well structured.
Matthias , примите мою благодарность за урок : " Using scenes and layers " . Хотя язык я не знаю, но достаточно доходчиво и без понимания языка. Я уже в течение нескольких месяцев наблюдаю и учусь у Вас по конструированию станков и приспособлений к ним , а теперь вот и в проектировании. Иван. Украина.
Oh, that is always a tough one. I used "microsoft video 1" in camstudio. But then the whole thing got re-encoded after editing with a different codec!
A key to making it look nice is to capture at the same resolution and keep that throughout. In my case 1280x720
So good! What an educational tutorial. This is next level Sketchup for making plans. Thank you for your efforts.
Thanks for such a great and to the point tutorial Matthias!
This is something that really trips me up. Thanks!
Good job. You made it really clear to follow and you haven't added unecessary padding. thaks for posting.
thank you!!! iv spent all day trying to figer this out . exellent work
Great idea how to use scenes and layers together! Thanks, Matthias!
Well done tutorial. I'm aware that you're Canadian, but it's so refreshing to hear Canadian/American accent using civilised metric units. :)
Brilliant. I've always wondered; never asked. Like most things, you make it look so simple. Thank you.
As usual, you do great work regardless of what you do technically and otherwise.
Excellent demonstration Sir. I will use your scenes and layers technique for my views. It makes perfect sense.
Dude, you are the best! thanks for everything, keep on rocking in the wood world! :)
Thank you for clarifying this. I was banging my head on the wall trying to figure it out. I still wish there was a 3d program out there that would do a dimensioned layout of my solid models, like SolidWorks, but actually affordable. Sketchup Pro with Layout can, but apparently it doesn't even do dashed hidden lines without convoluted workarounds with semi satisfactory results, or needing plugins for something that should already be there. I've been making my models on Sketchup and then redrawing layouts on cad, which takes a serious amount of time.
Pretty cool vid.
I have a question for you. If i have a 4" diameter log on my lathe, how many rpm's would it take to go 200 mph?
Excellent, just what I needed, very good presentation.
Thanks, this really helped, you have got be lousy at something maybe it is cooking.
Microphone was next to the keyboard, and the vibration transfer qutie well. It's really not that loud in real life. but the sound is kind of cool in the video.
Thanks Matthias. How do you make a cut list/diagram from the drawing? Do you use Sketchup for that or a different program?
I love your Vids..and learn from it. How do you screen record your designs?
Using 2017 version? Scenes are located under the "windows" tab, then hover over the drop down "default tray"menu and tic "scenes" to enable them to appear in the tray. Next, look near the bottom of the default tray (right side panel by default) and click the "+" to add a scene.
Fantastic video, Sir. Thanks for creating it!
Great series!
Would it be possible to make a cut list directly out of Sketchup?
Free version, right
Do you have training in sketchup on wood? like udemy etc
Hi, thanks for your tutorial. If you want to change something in your design and have already made the scenes, you have to recopy the modified object in every scene? I am new to sketchup, but it would be interesting to have scenes that are relatives to the main scene. i.e. they don't display different objects, they just apply a serie of transformations to the main scene. Do you know if other CAD software work that way?
Ok, I think I got my answer. You can make the table (or its parts) into a component(s) . If you copy a component, modification made to one will reflect on the others.
Where is this program located for purchase? That is so cool!
Exactly what I was looking for! Thanks for sharing this!
Super helpful. Thanks Matthias!
I've followed your first two videos on creating the table. I can't find the video where you round off the corners of the table top. The last one I watched was creating the mortise and tenon joints. Can you point me in the right direction of that video?
I appreciate how well you explain things! Thank you!
great video, do you have a PhD in google sketchup and youtube video making?
I come up with 17,600 RPM. Given the 4" dia x 3.14 = cir of 12.5" To keep it easy I left it at 12". At 17600 RPM the rotation would complete 3.33 miles every minute. Multiply that by 60 and you get your 200 MPH. Now since I took off the .5 " you actually can go a little bit slower RPM than that to obtain the 200 MPH.
Thanks Matthias! This is very useful!!!
Mathias, this helped me a lot, but, I have a question. If you had more layers and scenes, would you have to make a 'copy' for every scene and layer?
Hi. What plugin you use to make this animation.
a free version is on google, the full program is for sale there also, about 4500.00
just google sketchup.
Excellent! Very clear and concise. Thank you.
sooooooo helpful...... do you have another tutorial on how to make blueprint on sketchup
Hi Mathias. Excellent tutorial. I have one problem that you may be able to help. When I copy my model to use to pull apart, the original model also gets pulled apart. Do you know how to prevent this happening? Thanks.
meherenow7 You can either "explode" the copied object, or "make it unique".
Thanks! I just wanted to say also your ingenuity with the way you work with wood is amazing! Very inspiring to see. Thanks again.
make it a group instead of a component
back in the day, I did a lot of acad work in 3d....wish I had the time to learn sketchup. ;-)
I need to watch this again but you make it look so easy
please tell me what codec you used to record the video?
So you do use the free version? Just clarifying.
16807 RPM to get the outer surface of the log to spin at 200 mph.
Here is the math: circumference of log is 12.5667, so 1 rev goes 12.5667 in. 1 mile is 63360 inches, 200 mph is 12,672,000 inches/hr, or 211,200 inches/minute, since 1 revolution is 12.5667 you need 16807 revolutions per minute to get 200 MPH.
Love your videos. thanks for sharing.
Hi man, good video. But I've got a question, I'm using the Sketchup pro 2017, when I click in the main or the copy to select "ENTITY INFO", the window doesn't appear, I need to do the same as you did with the component, there is another option to get this window?
I don't know. Ask someone familiar with sketchup pro 2017
I just find the answer, there is a panel avalable to make this, is not a tab in these new versión. but I've got another question, when I move the assembly, appears a message that says: the layer will be combined whit another hidden layer. Do you kwon how can I move the assebly layer to the original possition without be combined?, Thanks for your time
figuring in the 1/2", you can slow the RPM down to 16,896 RPMs.
Thank you very much! That is what I was trying to find!
Hey Matt! R u still using the free version of scetchup? Cheers!
i would like to have a cad software for my ubuntu what is the best cad software? skethup?
I think this is the best and I tried pretty much all of the others. However, I kept seeing my text and dimensions from my "Assembly" appear in my "Main" scene. I did not grasp at first, that text and dimensions are entities and all entities must be selected and put on a specific layer. I prefer not to click the layers button to the left (which I understand can present problems). For me it is best to just select every dimension and/or text and choose the layer for it in the entities info box (safer)
do you use a mechanical keyboard? I heard the clicky noise. :D
thanks Matthias for this explanation.
Mathias, I've not had the chance to go through all your videos. I just have one question, do you ever use AutoCad?
i love this tutor, thanks Matthias Wandel for you tutor
You sounded like a professional computer geeks there other than a woodmaker...
Nice tutorial.. :-)
unfortunately they have changed location of all the layers and scenes stuff in sketchup make 2016 .... very hard to find. But despite locating them, and watching this video countless times, nothing seems to work quite the same.... despite your wonderfully structured and clear explanations .... because they've introduced more nomenclature like trays, that makes it even more confusing. I finally got it to work, but ... yeesh!
Never mind how many times I set a scene to display only one layer, and update the scene, then the other, attempting to emulate what you're doing here, when ever I go and toggle between scene 1 and scene 2 afterwards sketchup always adds another layer to the display regardless of the updated settings, messing things up. And if I hide the table top in the assembly view, never mind what, it will also disappear in the main view. It's exasperating.
I am having the same issue. It works best if there is nothing on layer0. It will preserve the layers but adds layer0 back every time. I am going try adding a layer right a the beginning before drawing anything.
My idea below worked. Using entity info I moved the whole object to the main layer, leaving layer0 empty. Now all is working like the video. It seems 2016 will always add layer0 back into the scene after toggle.
I've been through this over & over. If I put the original copy on Layer Main & the duplicate on Layer Assembly, when I make a Scene showing only Layer Main, that's what happens, but when I make a Scene showing only Layer Assembly, when I switch to the 1st Scene showing only Layer Main & then back to the Scene showing only Layer Assembly, it always shows both Layers.
Sounds like you may need to add another layer for each section. Start with layer 0 and build the whole project. Then work layer by layer and scene by scene.
This is one of the best presentations I saw!
BUT:
What program did you use to make this presentation?
...or is it a trade secret?
Are you kidding me? It was very clear this is SketchUp
@Matthias, do you use other CAD programs?
I want more of your sketch up tutorial vids!!
Do the scenes and layers need to have the same name?
not at all, you can have multiple layers in a scene and use a layer in multiple scenes if you want
Great job !!!!
Excelente meu amigo! Parabéns e Obrigado
Superb video Mathias, however if you can place your mic directly under the key board, each of those irritating key stroke clatters can become absolutely maddening.
thanks now I know how to sketch in sketchup from your series
Thank You, Your skills are awesome.
Excellent Tutorial. Thanks.
this isn't the free version of sketch up, right?
i will never need that knowledge but i liked soaking it in
Great clear concise instruction, thankyou
Depends on your car and the gear you're in.
wow what a nice program I'm gonna try to find it!
terima kasih banyak, tutorial yg sangat membantu , salam dari indonesia
Thank you! Helps me a lot.
under animation.. Not ½Second, but half the time, as the configuration was changed from 2 to 1 sec
Love all you do .. BTW
The whole idea was to either prove or diprove the 200 mph duct tape. My lathe won't turn that fast. I was going to do an inside out turning with 4 pieces of wood or maybe 9 pieces. I didn't want to use a lot of glue and wanted to try duct tape and just tape the ends. I'd still have to use some glue on the ends because the wood could shift a little bit with just duct tape. But it's a moot point now.
PeterH is correct. The whole "Scene" idea doesn't appear in Sketchup Make 2017. I ended up making separate drawings.
scenes and layers are still in 2017. Where it's located has slightly changed but I believe the functionality hasn't.
Click 'Window' tab, 'Scenes' around half way down..
@@adammacer Scenes are now located on 2017 version under the "windows" tab, then the pull down "default tray" to enable them to appear in the tray. Look near the bottom of the tray (right side panel by default) and click the "+" to add a scene.
YOU ARE RIGHT ON!
Thank you
great stuff. am new at sketchup
I know and i appreciate it. :)
Thanks Matthias
I disable transitions too. It kind of makes me sea sick. Good for presentations though. Great work by the way!
Assuming your lathe is bolted down correctly, it doesn't matter how many RPM's you have, it ain't going nowhere. :-)
Thanks Mathias
Thanks for the video, very good.
Very impressive. It would be better for beginners if you showed your actual operations in detail. You often quickly go through three different keystrokes, calmly saying the overall operation yet failing to specify HOW you are doing it. This makes the video good for experts but harder for newbies.
+Chip Sills It it was that way, it would be really boring and you wouldn't have watched it.
+Matthias Wandel Thanks for taking the time to respond. SInce I am myself new to Sketchup, I am trying to absorb a lot and appreciate all the help I can get. But I understand your point. Once the sequence of operations is learned well, it seems pointless and tedious to express all the steps.
I work with the pause video button all the time, have sketchup running in the background to replicate the steps, and, if needed, spool the video back again and again until I get what's going on. Compared to a lot of the videos on this site, these are wonderfully well structured and explained i.m.o.
Absolutely true. I just gave up watching a series of tutorials after 3 videos because the functions were re -explained each time. Painful. What's the point in having a series of videos if you go back to basics each time and you can't have one long video because ... oh what was I saying?
Thanks Jeffery.