( NO DRILL ) Rodholder for your boat
HTML-код
- Опубликовано: 2 окт 2024
- I appreciate you watching as I always do . If it your first time on my channel check out some of my other video I guarantee you'll find something that will perk your interested in . Subscribing is free and clicking the bell will allow RUclips to send you Notifications
For Fishin N Stuff Gear visit the Link below
www.etsy.com/s...
Patriot catfishermen of America
/ @patriotcatfishersofam...
Nice project! Quick PSA: don’t weld anything galvanized without a respirator and good ventilation! Zinc oxide fumes are no joke
I don’t have a pontoon boat I don’t even know anyone that has a pontoon boat, but I won’t miss even one of your videos because the content is AWESOMENESS
Thank you
Supepuper awesome video you should try to make some rod holders out of thick pvc tubing i made my own all the way here in South Africa and they work supper grate and they can't rust and also they are supper strong
Just got yelled at by my wife when she heard your voice. Exact words, "You like how your boat works, why are you ******* trying to do something different?"
Lol
Lol sounds like my wife
Keith, please consider doing a DIY video on a pole mounted and/or a “send down the line on a rope” lure knocker/retrievers. I bet you come up with something borderline ingenious! Thank you sir for consideration.
Suggestion for new video collapsible bank fishing cart caddy.
Soak your galvanized electrical tubing in vinegar for a few days. After that wire brush it good and you won't get the zinc poisoning from welding on EMT.
Thank you
What y’all waitin on click that button, awesome diy
I need me a pontoon boat
Genius, pure genius is what that is. Another "AWESOME" idea. Thanks.
You're the best D.I.Y video channel on You Tube hands down!!!!!
Awesome I seen you in kris Flores and just for future suggestion could you make videos of actually of you catching the fish with all your cool inventions!
I don't always have time . Put a lot of my free time into filming and editing. That's why I involve other RUclipsrs James is going to make a video review. I don't even have a pontoon boat
@@FishinNStuff ah thats to bad. Reguardless great videos and the editing definitely pays off good work one of the reasons I started I watching your channel is when I was younger I would always say like and stuff after all my sentences like can we go fishing and stuff and also pick up some lures and stuff from walmart 😂 but now my family just laughs about it. I meant to put in kris Flores stream guess my brain was somewhere else lol good night and have a great rest of your day 👌
AW-ZUM az alwayz... make it out of 1-1/2 by 2 tube and cut it out like you did and weld another nut on the tab and bolt through to make it clamp on for little added extra security running down the lake.. either way, its gonna a bigger fish than the rail will..
Your right thank you Sir
Well, well, well, I just happen to building a FISHING Pontoon right now. And I must say that right there is AWESOME!
Lol
Wow I was first
13:23 Sweet you know Gerald McRaney. Been a long time since a watched Major Dad 😆
Lol
Great design for toons. Maybe James can hook a monster and give us a real world test 💪
Missed the last couple videos somehow brother! Love the rod holders!
"A grinder and paint make me the welder I ain't."
No sweat, dude.
All long as it holds up good, that's all that really matters.
The D.I.Y. Guru has struck again!!! You sir are awesome!!! The dip was a good idea that will help keep it from sliding side to side.
It helps keep it tight that's fit sure
That's Just purty Dang Awesome right there , I like it , another Winner and if I'm right you can use that right there to catch ya self a purty Dang Awesome Catfish Dinner 😋🦈🎣 lol,,
I checked out your kewl knocker-offer channel. KEEP UP THE GREAT KNOCK-OFF STUFF. ROFLMAO.
Great video my friend 🇺🇸
Lil tip with the flapper discs,don't use them on sharp edges.It tears them up quick,a hard wheel is much better and won't catch and send the piece flying...not as often anyhow...lol
Also,the fumes from the galvanizing burning when welding is highly toxic.
Good Stuff Keith! Hi James!!! Happy Fishing Buddy!!
TA DAY! You out did yourself! Great job!
Your Awesome Brother. Man that was a great IDEA. Now I need a portable transducer bracket for the front of my boat. I'll call you this weekend and give you some more details
I got a 14ft alumi-weld jon boat and I need to put rod holders on it for crappie and catfish we need a DIY for rod holders on a little jon boat please..
I have a John boat with the rounded top would that work to use one of those on the top of a John boat Or do you have any idea
I made a video about a kayak I clamped on too round set legs , that might work
Thanks for making this video. I ask him how to make no drill rod holders for a pontoon boat and he made one when he could. This is why i like watching fishing n stuff youtube video if you ask about how to do something he will figure out how to do it & make a video about it so you can know how to make it or just watch his video and you will find stuff you like & you will like what he make & if you do please hit the like button & subscribe bottom to help very cool guy & funny and the really neat stuff he makes
Thank you Sir , sorry it took me so long
@@FishinNStuff no reason to be sorry I didn't expect you to have video on this quick because you don't have a pontoon boat but I should be saying thank you we're taking time away from your family and all to make the videos you do so people can learn how to make things without having to go out and buy it think you
The DIY s are awesome but we wanna see you go catfishing on your boat! 😎
I do I just don't film it much , the last time I did film it was this video
ruclips.net/video/P_K3IGLYAQE/видео.html
But in all fairness my channel is a DIY channel so I stay in my lane lol
You are the fishing MacGyver!,
Lol
Buddy I don't own a pontoon but that is how much I love watching your mixed up on your Channel😜😜😜😜 thumbs up number 373 wow😮😮😮😮
Thank you Sir lol
I like your channel. Keep it up bro.
Thank you
I just wanted to know who won the give away you done awhile back
I haven't gave the cutting board away yet I'm not to 100k . But I will be in March
Shielded gas, you must do a lot of welding lol sweet idea though
I weld for a Hobie, I do weld at work also . Shielding gas makes welding so much easier . A tanks not that expensive and lasts a very long time when done for hobie work
My brother has a pontoon boat. I have a V-bottom aluminium 14' boat. Thanks for all your help.
i hit the like button buddy
Awesome rod holders! I have a buddy with a pontoon boat that needs some of these. I will send him a link to your videos. Thanks.
I really enjoy watching your video's learning new stuff for fishing and not spending a lot of money either to make them
them holders are awesome!!!!!
Great video. You have great ideas. Keep up the great work. Your bucket hacks were some of my favorite.
another great product. might have to try it
Hey try to guinch the bar after bend it that should give you more strange
I really enjoy watching your channel, you have great ideas and it gives ideas 💡
Just wondering if it would fit a aluminum boat
If you have a square rail
The rocket launcher would work better if the bolt was pointing up so that bolt covers most of the hand rail. Less chance of it coming off
It won't come off
I like, got the perfect place for some of those.😁😁😁👍👍👊
I was talkin to Clarence Tuddlespud and he was telling me about these ideas last week??? And then you come along a do a video of the same thing?? Come on brother get your own ideas have you seen his new stink bait video?? Lmao Great job buddy and they are awesome, gonna be puttin some of these on my pontoon boat for sure!!
I saw the idea online but for got to mention that. I did see Clarences stink bait . Very funny , but don't think I'll be making any haha
That right there was awesome. What can you do for a Jon boat
Could you solder or braze it instead?
Yeah I said that at the end
i love the K.I.S.S. of your stuff cause dang some folks way over think thingskeep it up
I like the k.i.s.s method lol
Heating galvanized metal produces poisonous gas. Just FYI. Viewers need to know that if they're going to make this project.
Your right and thank you for telling everyone, I know a lot of welders and every single one of em know about galvanized metal . And 90 % of my views can't weld
@@FishinNStuff I'm loving your videos! I especially like the ones that use basic materials, like the noodles and PVC, since I'm not a welder 😁
@@gardenhawk a lot of ppl like those . Personally I'm a welder well kind of . I run a robot welder now days and I only touch up welds . But I like welding but they don't do as good as the pvc and pool noodles lol . I appreciate Sir
@@FishinNStuff lol believe it or not, I'm actually a woman...who loves catfishing 😁
@@gardenhawk women can do anything men can , my wife loves to fish too . So of course I believe it .
Great idea and products. I've got a small fishing boat ( 1990 16m Sea Nymph ) and would like to see a gunnel mount that wouldn't necessitate drilling. I think that would be AWSOME.
I made a cleat mount rodholder that's pretty cool
did the galvanizing fumes make you sick, seen a lot of warnings about it so wondering if you experienced the problem?
No . They will make you sick . But you have to weld more than just one piece. Most people get sick if they weeks it fire 8 hours . You can use a fan , in an open place and Flux core weld wire
Haha I made a cameo! I done made the big time!!🤣🤣 Excellent video as always Keith. I really like that rod holder base. It’s “awesome”!
Thank you . I thought about both of you . But you live too far lol
@@FishinNStuff it ain’t that far! Hahah. No for real, I’m honored to even have a 2 sec cameo on you’re awesome channel brother. Such a blessing.
Where are you Charleston area
@@FishinNStuff Santee Cooper Area
Now that is a good idea, been thinking on a way how to do that, thankx Keith!!!!
Nice build brother....can't wait to see him try them out!!
That is truly awesome . Two thumbs up 👍👍 . Your some kinda genius . Keep em coming .
I saw some like em online , and it got me to thinking so changed em a little bit
I love your avatars. They always make me smile. Hope to see you in Feb. in Louisville. Stay safe and be Blessed
I hope so , thank you
That was a great idea cant wait till the test video keep up the good work
That is one killer idea dude you should make and sell them
I like your rod holders but how would be make a set when my frame is on the outside? And the skin goes all the way to the top rail
Be careful welding on galvanize the smoke is toxic
Use a hose clamp or zip tie to hole it, yes the zip tie will melt/break but after it's tact'd,
Its really fine with nothing if your measure measurements are right
You are AWESOME!!!!!! Thanks for all the DYI's, we appreciate everything you do.
Your Awesome for watching them
Great idea. Think I will make some
Pert derned slick as always Keith!
Thanks Keith, I'll definitely builds some of these! Is that 3/16 wall square tubing?
Really you can use any thickness the main measurements is the 1 1/4 inside dimension
You always have the best diy projects 👍
Watching you from Serpentine Western Australia and it is A W E S O M E !!!!!
Thank you Mate
That`s some pretty cool looking rod holders
Now that was Awesome 😎
Great diy Keith.
Another great idea sir...im gonna make one too...thanks and God bless u
Dude I love all you're videos they inspire me you are awsome
Thank you Sir
You're welcome
Thanks
Bad ass
Awesome video!!!!!
Great video Brother. Thanks
Keith you could put a screen door on a Submarine!
Awesome video! Ding, Ding!
I thought I read "No Drill"; What's happening at the 4:39 minute mark? Just curious if defination of no drill has changed. LOL
Well typically the term refers to not drilling holes in your boat , I guess you could take it as not needing a drill lol
Awesome video! I don’t have the ability to weld, would you be interested in making a few I could purchase? I like the ones that you can screw the rod holder into! Great stuff!
These would be cheap . I don't have much time , working and making videos . They are probably better too lol .
www.bvdssej.ga/products.aspx?cname=pontoon+boat+rod+holder+rail+mount&cid=8&xi=1&xc=21&pr=27.99
Hey man can you build a rod holder for the rear handle of a jetski?
That was , you know .............awesome !! lol
Wow very cool. Really a great idea
Most people don’t own a welding machine or have the skill to use one. They probably don’t have a grinder either. It’s cheaper to just go ahead and buy some stainless clamp on rod holders online.
That's true but alot of people watching my videos do have those things . It's a DIY channel
Those a r e awesome wish I had seen this before I done drilled my my pontoon lol
Thanks for the great idea.
I don’t have a boat, but have been trying to figure out a rod holder for the handrails at the marina where I fish. This is an excellent idea.
I thought about that as well
I know you have decals for sale but they're not quite big enough for what I need what would you charge me for a 3-foot by 3-foot on your fishing stuff decal
The ones on my boat are smaller than that and I think they were 35 bucks . They get high in a hurry
Thanks I've been waiting on this
Sup
Thank you for your time and ingenuity I love your stuff awesome
Thank you very much
Do you have any ideas how to take this idea and adjust it for jettys, in australia we have 2 types of rails that run down jettys, round 2inch steel pipe and 4×4inch timber that is setting in a diamond shape so its harder for birds to sit on and probably helps wash their waste away in the rain too with it being pointed instead of flat.
Do you think you would be able to d.i.y something?
I'll never find a jetties to look at lol wouldn't something like this work
I think on the round hand rails it might turn around the post but a bigger version might work on the 4x4inch timber as long as the bolt doesn't just rip through the edge of the timber.
In my head I would a tension bolt on the bottom so it could clamp to the rail
On the round posts I think it would just spin and rotate around the rail, the timber rails it could work in a larger version but the bolt at the front might pull through the timber and slip off.
I think if you put a tensioning bolt at the bottom to act as a clamp then it might do the trick.
You ever think about offering a charter?
What a fishing charter
@@FishinNStuff yep
@@stepside78 I think he is a little busy editing and stuff he replied to me when I suggested he makes videos about him actually going out and catching fish but hes been really busy lately so just hope he rests up and continues making great videos I'll be praying for him never hurts
There you go. Another good video.
is this 1- 1/2" tubing 14 ga. or is 11 ga
Probably 14 is pretty thin
@@FishinNStuff thank you, enjoy watching your DIY videos , plan on making several of these for my sons pontoon. i have made a few other items featured on your channel .
That was awesome using this for sure
great ideas thanks!!
Can you make me sume
I only make the videos