Yes, I really enjoy using a laser on leather, but only for creating logos. When cutting lighter-colored leather, I can’t hide the black marks left from the burn.
I want one of those laser engravers I showed at the end of the video. They seem much better than this open engraver. This engraver can only be used in a woodworking shop during warm weather. But right now, it's cold there.
I have the algo 20w alpha laser I love it I want to try leather .. I have leather just haven’t found the right time not sure of the speed and power to cut though it . Or how many passes it takes
Interessantes Video, danke! Ich habe verschiedenes Leder hier, doch wie kann ich herausfinden ob es ein Chrom oder ein pflanzlich gegerbtes Leder ist? Danke
Danke für Ihren Kommentar! 😊 Ich kann nicht sehen, welches Leder Sie haben, daher gebe ich allgemeine Merkmale an. Ich meine pflanzlich gegerbtes Leder ohne Beschichtung: Pflanzlich gegerbtes Leder nimmt Wasser gut auf. Es lässt sich leicht formen und behält die Form nach dem Trocknen. Es färbt sich tief in die Fasern, während Chromleder oft nur oberflächlich Farbe aufnimmt. Ich hoffe, das hilft Ihnen weiter! 🌿
I have two sculpfun lasers, an s9 5w with out air assist and an an S10 10w with air assist. both work fine on the leather items I make, but for cleaner cutting the S10 is far superior with the air assist, far less scorching.
I’m not too bothered by the blackened edges and stitching holes. In most of my products, I darken the leather edge with paint, so this works for me. Despite the fact that the cut is very clean, a little Tokonole wouldn’t hurt to smooth out the leather edges.
Дякую) Поки що думаю. Кожен з них цікавий по своєму. xTool M1 компактний, має камеру і може різати ножем. Щоправда різку шкіри ножем треба ще випробувати. xTool M1 Ultra має більші можливості, може навіть малювати і робити тиснення .. ніби то. Було б цікаво з ним попрацювати на шкірі . Але там немає камери. WeCreat Vista та WeCreat Vision та Glowforge Aura також мають свої переваги, вони круті. Важко вибрати 😁😁
I don't really want to make a box, and this laser engraver isn't mine. However, I plan to buy a closed laser engraver, the xTool M1. It's more compact and already comes with an enclosed box from the start.
I honestly can't believe you are operating this without an exhaust and an enclosure. Not safe. FYI, try putting masking tape on the leather before cutting. Or if it's vegtan, wet it so it sits flat on the bed. Then clean it with a wet sponge. It will smell for awhile since the laser is cutting skin. It will fade in a few days. I usually use the Aussie conditioner to clean up the leather and the stitching holes.
Hello! Thank you for your advice. 😊 As I mentioned in the video, this engraver was borrowed for testing purposes for just one video. The owner didn’t have any additional accessories, like a smoke exhaust box. So yes, I had to breathe in that smoke, and it was horrible. Now I’ve purchased a closed engraver, the xTool M1. It’s much safer since it’s enclosed and has proper smoke exhaust to the outside. I might make a video about it after I’ve worked with it for some time. 😊
So very interesting, loved watching this.
Thank you! I'm very pleased 😊
Yes, I really enjoy using a laser on leather, but only for creating logos. When cutting lighter-colored leather, I can’t hide the black marks left from the burn.
Yes, that’s exactly what I mentioned in the video. 😊
looks cool and comfortable! ❤❤
Yes, if all the drawbacks are eliminated, a laser engraver can partially assist in the work. ))
That's awesome! I want one of those machines!
I want one of those laser engravers I showed at the end of the video. They seem much better than this open engraver. This engraver can only be used in a woodworking shop during warm weather. But right now, it's cold there.
I have the algo 20w alpha laser I love it I want to try leather .. I have leather just haven’t found the right time not sure of the speed and power to cut though it . Or how many passes it takes
I think it makes sense to run a test, as this feature is available in the program. This way, you can determine both the speed and power.
@ definitely thanks
Interessantes Video, danke!
Ich habe verschiedenes Leder hier, doch wie kann ich herausfinden ob es ein Chrom oder ein pflanzlich gegerbtes Leder ist?
Danke
Danke für Ihren Kommentar! 😊
Ich kann nicht sehen, welches Leder Sie haben, daher gebe ich allgemeine Merkmale an. Ich meine pflanzlich gegerbtes Leder ohne Beschichtung:
Pflanzlich gegerbtes Leder nimmt Wasser gut auf.
Es lässt sich leicht formen und behält die Form nach dem Trocknen.
Es färbt sich tief in die Fasern, während Chromleder oft nur oberflächlich Farbe aufnimmt.
Ich hoffe, das hilft Ihnen weiter! 🌿
I have two sculpfun lasers, an s9 5w with out air assist and an an S10 10w with air assist. both work fine on the leather items I make, but for cleaner cutting the S10 is far superior with the air assist, far less scorching.
Hello! Thank you for your comment. Yes, indeed, laser engravers cut leather very well. You have a wonderful RUclips channel. I’ve subscribed to you 😊
Interesting video. Are the burned edges good as they are or do they still need burnishing to look slick?
I’m not too bothered by the blackened edges and stitching holes. In most of my products, I darken the leather edge with paint, so this works for me. Despite the fact that the cut is very clean, a little Tokonole wouldn’t hurt to smooth out the leather edges.
You can also WET the leather before cutting.
Thank you! I'll definitely give it a try!
Дуже цікаве відео. Вже є думки, який саме закритий гравер хотілося б придбати?
Дякую) Поки що думаю. Кожен з них цікавий по своєму. xTool M1 компактний, має камеру і може різати ножем. Щоправда різку шкіри ножем треба ще випробувати. xTool M1 Ultra має більші можливості, може навіть малювати і робити тиснення .. ніби то. Було б цікаво з ним попрацювати на шкірі . Але там немає камери. WeCreat Vista та WeCreat Vision та Glowforge Aura також мають свої переваги, вони круті. Важко вибрати 😁😁
Meant to add, I am making an enclosure, lots of smoke!!!
I don't really want to make a box, and this laser engraver isn't mine. However, I plan to buy a closed laser engraver, the xTool M1. It's more compact and already comes with an enclosed box from the start.
I honestly can't believe you are operating this without an exhaust and an enclosure. Not safe.
FYI, try putting masking tape on the leather before cutting. Or if it's vegtan, wet it so it sits flat on the bed. Then clean it with a wet sponge. It will smell for awhile since the laser is cutting skin. It will fade in a few days. I usually use the Aussie conditioner to clean up the leather and the stitching holes.
Hello! Thank you for your advice. 😊 As I mentioned in the video, this engraver was borrowed for testing purposes for just one video. The owner didn’t have any additional accessories, like a smoke exhaust box. So yes, I had to breathe in that smoke, and it was horrible.
Now I’ve purchased a closed engraver, the xTool M1. It’s much safer since it’s enclosed and has proper smoke exhaust to the outside. I might make a video about it after I’ve worked with it for some time. 😊
Не повіриш, я буквально на цьму тижні теж слюни пускав на лазер :).
@@АнтоніоА Чому ж не повірю)) до речі, цей лазер буде продаватись )))
www.youtube.com/@RoadAgentLeather uses a laser for almost all his projects, he's very good.
Thank you! I've subscribed, it's a very interesting channel, you're right!