Excellent short instruction video. Well done Bill. I was about to try and remove the entire apparatus, but all it needed was to replace the wheels. Cost me $18.95 (January 2023), took ten minutes plus shopping time. Thanks so much.
My cat thanks you from the bottom of his heart! He can slide the door all by himself now, without any human help! Only wish he could close it without any human help!
Thanks - that was really helpful - exactly what I was looking for. Up until I saw your video (and having watched about four others), I didn't know if I had to replace the whole carriage, or could just replace the cracked wheel - now I know, and I have just done it!
Thanks mate! my idiot dog ran into the door at full pace when playing with my other idiot dog and took it clean off by snapping the little plastic wheel. All fixed thanks to this video. Cheers!
Hi Bill, single mum here and having to sort out a whole lot of DIY tasks around the house. Your video was so helpful and I feel quite accomplished that I was able to change the wheel by myself. Many thanks
Thank you Bill this is the only video I could find that helped me I didn't even know if the retractable Wheels should go on the bottom or the top of the screen since I didn't pay attention when I pulled out the damn door lol so I had to start there . thank you so much. Love the accent I could listen to you talk all day.
Thank you for posting this video. You made it simple and easy for a rookie like me. I only had to replace rollers only, so your suggestion was cost effective as well as easy to achieve. I have wd40 which reinstated its spring functionality. Thanks again and wish you have more success with your business. Cheers
Hi Bill, it seems like the issue on my door is that the body isn't springing back smoothly. Have you got instructions on how to remove and replace the whole body when there aren't screws or a rivet? There is a single screw perpendicular to the carriage body running through the door but it doesn't look like it fixes into the door itself. Cheers!
MATE!!! My bodies are riveted in so should I just drill out the rivets so I can place them?? Wheels are TOAST and need replacing and I think one of the bodies is cracked anyway..
If it’s just the wheel you can replace the wheel on it’s own, the wheels pops out with a flat head screw driver. If the body is also damaged then replace the body ( can be purchased in a lot with the wheel about $ 15). The pop rivets need to be drilled out to remove the body. I have a video on removing pop rivets if you are not sure how to do it. 👍
Billshowto Popped the old ones out.. Found the new ones at Bunnings.. And pressed them in by hand and away we go!! Door slides like a brand new one!! Next to tackle is the internal door..
Hey Bill, Thanks for the How To video. I'm having the wheel issue on the glass sliding door. How on earth do you remove that from the track? For now I've sprayed the track with silicon and its helped the mrs to be able to slide the glass door.
Hi Bill. Recently our sliding door (the one with the mesh) came off all of a sudden. I put it back but it wouldn't lock. I checked the top and bottom wheels, they look broken but they seem to be broken since a long time as I could not find any pieces anywhere. Now it won't lock - as if something is stuck in the lock. Do you think replacing the wheels will fix it? Thanks
My husband just replaced the roller wheels on our screen door. It moves so smoothly now. However, when we close the door, it won't close all the way. There is a gap between the door frame and the screen door. It closed fine before the rollers were changed. Any idea what could be causing this?
@@billshowto not really obvious, you just seemed a bit flat, not your usual self. Looking at how to replace the runners on that and get all 3 panels back in without smashing the glass.
Excellent short instruction video. Well done Bill. I was about to try and remove the entire apparatus, but all it needed was to replace the wheels. Cost me $18.95 (January 2023), took ten minutes plus shopping time. Thanks so much.
My cat thanks you from the bottom of his heart! He can slide the door all by himself now, without any human help! Only wish he could close it without any human help!
Mate... can't tell you how much your vids have helped me out... for years! Thanks! 👍👍👏👏🍻🍻
You’re welcome 👍
Thanks - that was really helpful - exactly what I was looking for. Up until I saw your video (and having watched about four others), I didn't know if I had to replace the whole carriage, or could just replace the cracked wheel - now I know, and I have just done it!
Thanks mate! my idiot dog ran into the door at full pace when playing with my other idiot dog and took it clean off by snapping the little plastic wheel. All fixed thanks to this video. Cheers!
You can get all metal wheels instead of plastic ones, alot more dollars but the dogs wont break the wheels so easy.
Thanks Bill. Nice simple instructions and well narrated, shot and edited. You're a star!
Thanks for the straight forward guide!
Hi Bill, single mum here and having to sort out a whole lot of DIY tasks around the house. Your video was so helpful and I feel quite accomplished that I was able to change the wheel by myself. Many thanks
Your a pretty hot looking single mum,why?
This has helped me a lot! Thx mate!
Very thorough instructions, love it, thank you.
Thank you Bill this is the only video I could find that helped me I didn't even know if the retractable Wheels should go on the bottom or the top of the screen since I didn't pay attention when I pulled out the damn door lol so I had to start there . thank you so much.
Love the accent I could listen to you talk all day.
Simple and to the point. Excellent content mate, made my life easier!! Thank you!!
Thanks, mate. My ones are rooted due to the sea salt and some just seized due to lack of use etc. Simple and clear. Cheers!
You’re welcome 👍
Thank you. Easy to follow instructions. Appreciate your time.
Billshowto does it again. Legend.
Thank you for posting this video. You made it simple and easy for a rookie like me. I only had to replace rollers only, so your suggestion was cost effective as well as easy to achieve. I have wd40 which reinstated its spring functionality.
Thanks again and wish you have more success with your business. Cheers
Thanks so much, finally got my sliding door fixed
You're a Legend Bill - thanks.
Great down to earth video. Cheers mate. Exactly what I was after.
Very handy mate.. u saved me big money.. I owe you 🍺. Thanks
You just saved me a few hundred bucks. Thanks mate 👍🏻👍🏻
👍👍
Have saved me $$$. Thank you!
You’re welcome 👍
Thanks so much for taking the time to show how its done. I feel confident i can do it myself now. And with only a screwdriver. 😁
You’re very welcome 👍
You just did an amazing job at giving clear instructions.... God bless you.
Thanks, very easy to follow and understand.
Thanks bill! Really appreciate these kind of videos!! Definitely very handy when you are a single mum lol 👍👍
You’re very welcome, glad I could help 👍
Thank you so much sir for you video.
It's much helpful.👍👍
Awesome video thank you Bill! Straight to the point & no waffling. I'm off to Bunnings now & feeling knowledgeable and confident. A+ 😉😃
👍
You definitely saved me some $ so thank you. I loved it so keep the video coming.
You’re very welcome 👍
Thanks Bill👍
You’re welcome 👍
Great video!
Oh man thankyou so much! my door sounds like a cat being stepped on, this is exactly the video I need!
Perfect, thank you.
Well done, really helpful
Thank you so much! You just saved me a lot of money .
You’re welcome 👍
Thank you, Bill. I appreciate your effort.👍👍👍
Thanks, your video was very helpful!
Helpful and well presented
Ty xx
Very clear advice. Thank you very much 👍🏻
👍
Brilliant! Straight to the point! I like!
I’m glad you enjoyed it 👍
@@billshowto You're welcome...Off to Bunnings now for new rollers, thanks! :)
Thanks Bill! Exactly what I was looking for!
You’re welcome 👍
Very informative video as usual. Thank you for sharing.
Glad you enjoyed it 👍
Thanks heaps Bill!
Great
Exactly my next job
Cheers Bill
No problem 👍👍
Hi Bill, it seems like the issue on my door is that the body isn't springing back smoothly. Have you got instructions on how to remove and replace the whole body when there aren't screws or a rivet? There is a single screw perpendicular to the carriage body running through the door but it doesn't look like it fixes into the door itself. Cheers!
GREAT! Where can i buy these type of roller wheels? Which model are?
MATE!!! My bodies are riveted in so should I just drill out the rivets so I can place them?? Wheels are TOAST and need replacing and I think one of the bodies is cracked anyway..
If it’s just the wheel you can replace the wheel on it’s own, the wheels pops out with a flat head screw driver. If the body is also damaged then replace the body ( can be purchased in a lot with the wheel about $ 15). The pop rivets need to be drilled out to remove the body. I have a video on removing pop rivets if you are not sure how to do it. 👍
Billshowto Popped the old ones out.. Found the new ones at Bunnings.. And pressed them in by hand and away we go!! Door slides like a brand new one!! Next to tackle is the internal door..
Hey Bill, Thanks for the How To video. I'm having the wheel issue on the glass sliding door. How on earth do you remove that from the track? For now I've sprayed the track with silicon and its helped the mrs to be able to slide the glass door.
I’ll try post a video on this shortly
Hi Bill. Recently our sliding door (the one with the mesh) came off all of a sudden. I put it back but it wouldn't lock. I checked the top and bottom wheels, they look broken but they seem to be broken since a long time as I could not find any pieces anywhere. Now it won't lock - as if something is stuck in the lock. Do you think replacing the wheels will fix it? Thanks
Hi, you should replace the wheels first then you can adjust the catch position on the door jamb side to line up with the lock
@@billshowto Thanks Bill for your prompt reply. I will definitely try that. Subscribed cheers :)
My husband just replaced the roller wheels on our screen door. It moves so smoothly now. However, when we close the door, it won't close all the way. There is a gap between the door frame and the screen door. It closed fine before the rollers were changed. Any idea what could be causing this?
Sounds like the lock is not lining up with the catch on the door frame/jamb. Try either adjusting the wheels or re position the catch 👍
@@billshowto thanks!! We made some adjustments and it is closing now!! Appreciate your prompt reply!!
Skip to 2 mins mark
Hey Bill. Sounding a bit crook, mate. Hope you get better soon.
How about showing us how to fix a glass shower screen?
Lol that obvious? Thanks, what do you want to see regarding a shower screen?
@@billshowto not really obvious, you just seemed a bit flat, not your usual self.
Looking at how to replace the runners on that and get all 3 panels back in without smashing the glass.
No problem, next time I come across one of those shower screens I’ll upload it 👍
THE RUSTY TRACK WOW PLEASE PAINT HER!!
Looks nothing like mine.