Thank you so much! ❤ Great video instructions. Hubby & I just fixed our sliding door in 20 minutes. After 8 years of a stiff sliding door😅 I was about to call in a pro... now we're the pros 🎉
You saved me from getting a pro to replace the rollers... Thank you! Just needed to raise the wheels. Was looking for a local "doors smith", when I stumbled upon this piece of gold... ❤
watched this last night probably around 7:30am today at Gelmar to buy new wheels 😃 . did the job less than 30mins thank you very much . my wife gone be happy when she comes back from work
Thanks mate, 6 years with stuffed door and I couldn't workout how to get the door back in as rollers stuck out ,now I know what the screw is for ,to lift the rollers, good video mate.
You might also add that if your track is corroded at all it will eat your new rollers, you can buy SS track liners that are a "u" shape that you can caulk down over your existing track and have a nice new easy sliding door and longer-lasting rollers, and it's an easy job also.
Very good, thank you. My slider totally froze up just as I was closing it for the final time before heading upstairs to go to bed. Panic. Not sure about choosing a new plastic replacement but these days that's where we are. Oh, one more tiny hint: take advantage of the slider being out and clean up the track thoroughly - you won't get another chance for about another 20 years! Thanks again.
Thank you, my door came off the bottom track on 1 wheel and I couldn’t figure out how to get it back on. One little screw. Proves you don’t know what you don’t know. Thanks again.
I'm starting to do more and more DIYs around the house to save on contractor's cost. Thank you for this video, it's definitely going into my collection.
Thank you for the video. Helped a ton. I had a frightening experience this last weekend. My door kept jamming and riding up… and then what was worse was the door dropped totally and the top came out of the runner and started tipping out. Now I have EDS meaning I dislocated joints easily but when I saw the door falling I just dived outside to stop it completely on adrenaline… and popped both shoulders. The rollers really needed replacing YEARS ago as the door is about 20 years old. Oh well, you live and learn.
Thanks for the EDS warning! My buddy & I both have it - will be extra careful changing rollers & watch out for tipping. Hope you were able to pop them back in & healed up quick!
Thank you for the video I have been having this problem since two weeks after installation I'm going to fix this your presentation was on point thank you again.
My door is extra large/wide and is so bad I broke the handle trying to close it. I have watched several videos on this subject and yours is by far the best. thank you for your time and clear instructions, new sub:)
Thanks for the insight but I'll most likely need several people to lift my glass door it's old and very heavy but you have inspired me if I could only remove it from the track I'd be able to repair it so for me it looks like I'll have to call in the professionals more money but the door is way too heavy for even two people Thanks for the information and video it was great
So so helpful. Yours looks like the 2.4 x 2.1 I have. It's been stocking a but and I've been worried that the wheels might need replacing so thanks for this
Shoot some WD40 on the housing to help make it easier to remove. Nylon wheel on a metal rail will not last long. Need to replace with a metal wheel and add some grease onto the bearings before installation for a longer life
Thank you for this video. really helped me to replace the wheels on a door. Had to take the entire security gate down in order to do so, but I did it! I had to bend the wings though, is that normal?
If the rollers are rusted and the adjustment screw doesn't work can I just remove the upper screw and hope the weight pushes the wheel up into the frame
Do the roller assemblies not screw to the frame at all? I have a door identical to this, but the old parts i pulled out look nothing like that wheel assembly. In fact, there are two screws - one that adjusts the height of the wheel and another one that screws it against the short wall. Of course, I'm adjusting it every other week, even with the brand new assembies I put in, and they wobble side to side as it's just a long (stripped) screw holding it in place now. Just shocks me that it's not secured to the frame, just sitting there
I can't figure out what you did from 3:20 to 3:25. Also, the bottom of you door is open. How did you get that access? My roller is almost inaccessible.
I was stupid and unscrewed the top screw completely. Now I now it's what keeps the frame together. How do I fix that? That top screw doesn't want to tighten anymore.
Thank you so much! ❤ Great video instructions. Hubby & I just fixed our sliding door in 20 minutes. After 8 years of a stiff sliding door😅 I was about to call in a pro... now we're the pros 🎉
Thanks to this video I am finally going to fix our patio door after 5 years 😝 my wife sends her appreciation
❤
lol minor fixes that that make life easier
You saved me from getting a pro to replace the rollers... Thank you! Just needed to raise the wheels. Was looking for a local "doors smith", when I stumbled upon this piece of gold... ❤
watched this last night probably around 7:30am today at Gelmar to buy new wheels 😃 . did the job less than 30mins thank you very much . my wife gone be happy when she comes back from work
Thanks mate, 6 years with stuffed door and I couldn't workout how to get the door back in as rollers stuck out ,now I know what the screw is for ,to lift the rollers, good video mate.
Absolutely perfect instructions. Thank you for these clear step by step instructions.
You might also add that if your track is corroded at all it will eat your new rollers, you can buy SS track liners that are a "u" shape that you can caulk down over your existing track and have a nice new easy sliding door and longer-lasting rollers, and it's an easy job also.
Very good, thank you. My slider totally froze up just as I was closing it for the final time before heading upstairs to go to bed. Panic. Not sure about choosing a new plastic replacement but these days that's where we are. Oh, one more tiny hint: take advantage of the slider being out and clean up the track thoroughly - you won't get another chance for about another 20 years! Thanks again.
Thank you, my door came off the bottom track on 1 wheel and I couldn’t figure out how to get it back on. One little screw. Proves you don’t know what you don’t know. Thanks again.
I'm starting to do more and more DIYs around the house to save on contractor's cost. Thank you for this video, it's definitely going into my collection.
YOUR INSTRUCTIONS are very helpful to me ..thank you
Excellent video, thanks for showing the actual roller and explaining each step clearly!
You, sir, are a scholar and a gentleman! Thank you.
This is exactly what I'm looking for. Thanks for uploading the vid. Very helpful
Thanks for the vid. Very informative and easy to follow. Wife also thanks you after a year of dragging heavy door over very warn rollers. 😀
Hello from South Africa. This was such a great help thank you!
Thanks for sharing how to do this. Really appreciate the detail and how you show each step.
Very clear and concise instructions. Thank you!
My door was not rolling well at all...I turned the screw and raised
the door and now it works perfect...Thanks!
Thank you so much. Very useful video with detailed instructions.
Thank you for the video. Helped a ton.
I had a frightening experience this last weekend. My door kept jamming and riding up… and then what was worse was the door dropped totally and the top came out of the runner and started tipping out. Now I have EDS meaning I dislocated joints easily but when I saw the door falling I just dived outside to stop it completely on adrenaline… and popped both shoulders.
The rollers really needed replacing YEARS ago as the door is about 20 years old. Oh well, you live and learn.
Thanks for the EDS warning! My buddy & I both have it - will be extra careful changing rollers & watch out for tipping. Hope you were able to pop them back in & healed up quick!
Great video. To help with others searching, this will work with Prime-Line D1525 (1.5" patio door roller assembly)
Thank you so very much. It was wonderful easy to understand.
Practical videos that are straight to the point all the time. Keep it up!
Perfect, I’m gonna do it myself. Was thinking of calling someone. Thanks for the video
Thank you for the video I have been having this problem since two weeks after installation I'm going to fix this your presentation was on point thank you again.
Very clear zoom views and very clear spoken instructions. Thank you.
Excellent video and the best instructional I've seen on RUclips thank you :)
Thank you very much! Just did as you instructed and worked wonders 👌
Lekker video! Baie dankie. I’ll be doing this is South Texas in a few hours.
Thank you for the information. Excellent video with clear instructions.
Thank you for these clear step by step instructions.
Great video. Excellent, clear communication.
It was a very good tutorial.❤ nicely explained and showed
My door is extra large/wide and is so bad I broke the handle trying to close it. I have watched several videos on this subject and yours is by far the best. thank you for your time and clear instructions, new sub:)
You made it all so simple.what a weight off my shoulder. Thanks my mate
Thanks for the insight but I'll most likely need several people to lift my glass door it's old and very heavy but you have inspired me if I could only remove it from the track I'd be able to repair it so for me it looks like I'll have to call in the professionals more money but the door is way too heavy for even two people
Thanks for the information and video it was great
Terima kasiiih ber baginya pak ini sangat ber manfaat ,,salam sukses buat bapak di sana ,,,🙏🙏🙏
This saved me a lot of money. Thank you for the detailed instructions! :D
Thanks a lot, I could fix my door, next weekend will replace the windows. On my own 👍🏻 :)
Thanks so much! Really helped a lot to fix my door! Appreciated!
So so helpful. Yours looks like the 2.4 x 2.1 I have. It's been stocking a but and I've been worried that the wheels might need replacing so thanks for this
Thanks bru. You are a legend 🇿🇦
Really excellent demo. Thank you so much!
Thank you for great video greatly explained well done
Excellent. My slider never worked right, was stiff. Ill try to fix it and it probably just always had a defective roller!
Already done my sliding door but damn this is a great how to. Thank you
Thank you for sharing your knowledge, it really helps!!!
Wonderful. This is exactly what I need to know. Many thanks.
Thank you so much, you just saved me a lot of money.
Very helpful, sir. Thank you!
Thank you the video sir. By the way do you know where I can buy to the track because mine is worn.
Very informative and well done!
This has been so helpful. Thank you so much sir.
Thorough, clear, I owe you a beer....
Thanks mate', easy clear instructions.
Amazingly helpful video, thank you!
Fantastic, I’m in a condo and they are not replacing the doors but I can replace the seized rollers! Just have to find the pieces now…..
sorted out my problem , thanks
Thanks, looks like my problems will be sorted out
Very helpful video, thank you.
Shoot some WD40 on the housing to help make it easier to remove. Nylon wheel on a metal rail will not last long. Need to replace with a metal wheel and add some grease onto the bearings before installation for a longer life
Unkie's doors, exactly! Thank you - we can do this!
by-the-way it's clockwise and counterclockwise thanks for the video
Thank you for this awesome video.
Very clear instructions, thank you
Very helpful and informative thanks
Thanks for the explanations
Dom
Thank you for this video. really helped me to replace the wheels on a door. Had to take the entire security gate down in order to do so, but I did it! I had to bend the wings though, is that normal?
Thank you, that was helpful
I have a very wide heavy door, not sure if the new plastic rollers will last the 40 years the original cast aluminium ones did?
you are my heroes! THANKS
Thanks man! Really helpful!
Thanks this helped me a lot
Thanks for the video. Even the same rollers I have. AAA+++
Where we can buy this wheels thanks 🙏
If the rollers are rusted and the adjustment screw doesn't work can I just remove the upper screw and hope the weight pushes the wheel up into the frame
Hi Sir, instead of a single wheel, can replace with a longer replacement with 2 wheels, for stability sake?
Good detail. Thanks
Great thorough videao.. cheers
Thank you 😊 Great Job
Very helpful. Thank you!
You've saved my day.
That’s great IF…your slider is outside to the stationary pane. Mine is the other way around so, I have to remove the other pane to remove the slider.
Do the roller assemblies not screw to the frame at all? I have a door identical to this, but the old parts i pulled out look nothing like that wheel assembly. In fact, there are two screws - one that adjusts the height of the wheel and another one that screws it against the short wall. Of course, I'm adjusting it every other week, even with the brand new assembies I put in, and they wobble side to side as it's just a long (stripped) screw holding it in place now.
Just shocks me that it's not secured to the frame, just sitting there
Beautiful good job now I will do my
Thank you. It’s a great video
Thank you for this video!
Tks. Was very helpful
Very good video
Cheers Paddy good one.
I can't figure out what you did from 3:20 to 3:25. Also, the bottom of you door is open. How did you get that access? My roller is almost inaccessible.
Very nice. Thank you so much...
Well done. My darn screen door is stuck and I can't get it off to inspect the wheels.
Does the sliding door has specific rollers to use?
Very good video.
excellent idea
Brilliant video. Made things very easy to do. Thanks buddy.
Can you replace a single wheel with a dual wheel? Thanks
I was stupid and unscrewed the top screw completely. Now I now it's what keeps the frame together. How do I fix that? That top screw doesn't want to tighten anymore.
Hi there. In my situation the screw is stuck, can't turn it at all. I tried the CRC but no luck. Any idea?
Brilliant.