Supercharged Long Travel Stage 3 2017 Tundra
HTML-код
- Опубликовано: 24 июл 2024
- We have had this truck for awhile, but it is finally out on the road and adventuring. This Stage 3 Suspension system is a pleasure to drive both on and off-road.
Total Chaos - Plus 2.5 Boxed Long Travel Kit
Total Chaos - Weld-On Spindle Gussets
Total Chaos - LOWER CONTROL ARM CAM TAB GUSSETS
Total Chaos - Rear shock hoop kit - Tundra
Total Chaos - Dual Shock Hoop/ Tundra LT
Archive Garage - Tundra 1" Shackle
Total Chaos - LONG TRAVEL 4WD 4340 AXLES - Tundra
King Shocks - Tundra 07+ Long Travel Remote Reservoir Coilovers with Adjusters
King Shocks - Tundra 3.0 resi w/Adjusters
King Shocks - 2.5" 3 Tube Bypass Piggyback Reservoir Shocks with Clicker Adjusters
Archive Garage - U-bolt Flip Kit - Tundra w/bumpstops
TAV Spec Leaf Springs 1,700
Total Chaos - L/T Heim Sway Bar Links
Nitro Gear - Tundra 5.29 Front Dropout W/ARB
Nitro Gears - 5.29 master rebuild kit
50Ten Flatbed Tray - No cargo box or tire carrier
50Ten Camper system
RiGd - UltraSwing MegaFit
Goose Gear CEO Floor Plan - Full Size
C4 - 2014+ Tundra Overland Series Front Bumper-Full
COME UP WINCH - SELF RECOVERY WINCH -SEAL GEN 2
12.5RS
Factor 55 - Ultra Hook Grey
McNeil - FIBERGLASS FENDERS
Magnuson Supercharger Tundra 5.7L
Method 704 Black
Toyo MT 37x12.5R17
Baja Designs - LP9 Pro, Driving Combo /WHITE -Front Bumper
Baja Designs - LP6 Pro, LED, Driving/Combo Amber - Front Bumper
Baja Designs - Wiring Harness, LP9/LP6 Pro, 2-light Max
Baja Designs - S2 Sport, Pair Work/Scene LED White - Roof Rack
Baja Designs - S2 Pro, Pair Spot LED, Red -Dust Light
Baja Designs - S2 Pro, LED Work/Scene, Flush Mount -Reverse Lights
Baja Designs - OnX6, Hybrid LED and Laser Light Bar 50"" - Roof Rack
Baja Designs - Squadron-R Pro, Pair Driving/Combo, Amber -Fogs -Front bumper
Baja Designs - S2 Pro, Driving Combo - Amber -Fogs - Front Bumper
Baja Designs - XL Pro, Pair Driving/Combo, Amber -Fogs -Front Bumper
Baja Designs - Dome Light w/Switch -Engine Bay Lighting
sPod Bantom X w/ HD panel
Oasis Mfg. - XD4000 12v Air Compressor
Front Runner - SLIMLINE II ROOF RACK KIT / LOW PROFILE
Expedition Essentials - TOYOTA TUNDRA DASH MOUNT, POWERED ACCESSORY MOUNT
Expedition Essentials - RECOVERY BOARD QUICK MOUNT (MAXTRAX MOUNT) FOR MAXTRAX MKII
ALU CAB - 270 Degree Shadow Awning - LHS
Alu-Cab - Shadow Awning Side Wall Kit - LHS
Alu-Cab - C/C shower cube (RHS)
Rugged Radios - Radio Kit - GMR-45 High Power GMRS Band Mobile Radio with Antenna
Zarges - K470 380031
Ram Products - Mounting We-Boost
Ravelco - Anti-theft Device
_____________
00:00 - Intro
01:25 - Lights, Bumper
03:31 - Front Suspension
05:11 - Wheel & Tires
02:51 - Engine compartment
06:06 - Front fenders
06:50 - Engine Compartment
08:54 - Wrap
09:46 - Roof Rack & Lights
12:00 - Rear Suspension
13:09 - Camper Exterior
17:00 - RIG'd Ultraswing & Jack Mount
18:55 - Fuel Tank
19:20 - Camper Storage
24:07 - Shower Cube
24:41 - Camper Interior
27:46 - Cab interior 
Авто/Мото
This is the Best Purpose Built Tundra on the Planet Earth Period! 🤙🏾Excellent Job!
Hahaha thank you!
intro music goes hard. the trucks deliver. love u guys
Hey thank you!!
🤘🔥
Geez guys. Attention to detail on this build is incredible. It looks great and I have no doubt the ride and performance match that quality. Dream build right there!
That truck is freakin awesome. Excellent work, fit and finish it top notch! I love the black multicam wrap, the sizing is perfect.
This thing is SOLID. Loved the touch with the TRX mount as well :)
Heck yeah! Thanks for watching!
true greatness Walt! Super job and congratulations to you and your client.
Thank you!
Awesome truck! Ridiculous build! Was really hoping you were going to pop the top so I could see the sleep area though. 😁
Awesome build!!! I have high clearance bumpers so my spare is mounted in the bed, that jack stored underneath is a great idea.
Thank you!
Man! The owner better be happy with that truck. Awesome job👍👍👍 love the multi cam wrap too!
He’s super stoked!
Incredible work TAV!! You guys are top!! Thanks for sharing!!
Hey thank you!
How much did the total build COST
Shit they probably got at least 30-40k in that truck.
Wow, this has everything!
amazing job
Really nice build, there is better options available for a shower enclosure which is adjustable to lengthen the wall closer to the ground.
This is the best truck in the entire world.
My truck has a lot of the same setup. One thing that has bugged me is not having inner fender liners on the fiberglass fenders. Any advice on material to make some like yours. They look super clean.
A macho eye candy. I love everything about it. BTW did I miss the bed where you sleey or was it really not show.
It’s in there but not much to show. Just a mattress. We glanced over it kinda quick.
Wow! This things a beast! I wanna cone down from Colorado and have a long travel installed on my 18 supercharged tundra. Hopefully no more crazy lead times..? Do you stock these kits? Thanks, love the truck, sick.
Hey thanks! We don’t stock this stuff because every truck is built slightly different and the stage components are not a kit so to speak. They are a grouping of components from different companies that we make to work together.
Hello What is the brand of support for the iphone that is bolted into the console thank you
nice i will take two
What mirrors are you running on this build?
That's an awesome build. Is this a one off or you plan to make a series of these?
Every build we do is a personalized vehicle for the client
Nice
Thanks
What does something like this cost ?
Incredible build! Did the frame have to be modified/lengthened for this camper? (since it’s a 5.5’ bed)
Thank you! No frame stretching need. Some areas are reenforced but the flatbed extends further over the rear axle.
@@TAVLLC thanks Walt! Also, how much would you estimate the flat bed and camper fully loaded weighs on this truck? Can’t find any weight specs on their site.
@@oversizedoverlanding2365 I didn't get a chance to weigh it before it left so I'm not sure. I was told when we built our Tundra a couple of years ago that the empty camper was estimated at about 800 lbs. We ran a spring rate that would allow us to carry a load far above that and we used a similar spring rate for this truck.There is a lot of weight in this truck not including the clients gear. The flat bed itself is probably in the 250-300 lb range but that's a guess.
@@TAVLLC gotcha, thanks alot!
😎❗️
Didn’t catch it in the video but where’s this filmed? Looks a lot like where I used to wheel in NM.
We didn't say. But it probably is. Our shop is in ABQ
@@TAVLLC never miss things till ya can’t have em. Really miss the landscape for wheelin’ out there. Love the build! If you need a bronco for some r&d I’m your guy ;)
Honestly everything looks very sexy accept those c4 is everywhere and everyone have those bumper doesn’t make it uniq anymore.. nice build .
Thank you! C4 bumpers are like a work of art when you see them in raw material. They just work. Really well.
@@TAVLLC I do see it in real
Person just didn’t like to see everyone have the samething .. nothing special making it doesnt look cool anymore .. almost everything look the same .. a nice build suppose to be uniq and different.. 🤷♂️ when everyone roll out their truck almost everything is like identical just different color of body and wheels .. nothing special and uniq .. your build is nice accept the bumper 🤭sorry maybe look for something diff or custom your build that might spark some tension 🤙
We build for functionality and the clients needs in mind. The look comes with it in the end. If the client loves their build then that is all that matters.
@@xlazyjaysxwhen you're in the middle of nowhere smashing through rocks the last thing on your mind is "Does my bumper look like someone else's?" 🤣
@@BrandonBaecker first I don’t care what I smash into aslong my bumper doesn’t look like yours .. just saying better running something more uniq because the truck look uniq build . Why you get hurt on it maybe you 1 of those g4 fan boi 🍌🤭
I would like to know what this conversion cost! I'm of my 5th Tundra and for me it's the only truck I want!!
we don't quote prices over social media. If you are interested in a build you can hit us up through our contact form and we can schedule a consultation.
What Octane fuel do you need for this supercharger?
91 octane
Can you purchase or do the work just for the rear TC rear shock relocation?
We can.
@@TAVLLC how would I be able to order the rear TC shock relocation kit?
Give us a call at the shop 505-219-3147. You will need to change your rear shock as well. If you give us a call we can discuss the differences with you.
Wish you all did Jeeps!
We do. We're building a gladiator with an alu-cab canopy camper right now.
@@TAVLLC that's awesome, I hope you do a video on it!
We plan to!
@@TAVLLC that's awesome, I can't wait to see it!
Now time to do a chevy or ford. Too many toyotas. Looks sweet though!
Already have. Just need more people to bring them to us.
@@TAVLLC no doubt! Lots of toyota owners out there and less the other brands haha!! I'd bring you a chevy if i had the funds ;)
i boxed in the whole frame on my tundra before i added any weight on it. C channel just is garbage, im glad they did away with it on their gen 3 tundra.