Stihl chainsaw bogging down, has no power or is leaking fuel? CHECK THIS! Repair/Vlog
HTML-код
- Опубликовано: 21 сен 2022
- Thanks for tuning back into Chickanic! If you found this video helpful, please LIKE, SUBSCRIBE and COMMENT!!
If you would like to show your support, find my Amazon Wish List HERE!
www.amazon.com/hz/wishlist/ls...
Buy your own Chickanic T-Shirt or Hoodie HERE!
chickanic.com/
Find some of my favorite tools in the list below!
Get a WERA tool kit like mine HERE!
amzn.to/3CEkWo5
Get your WERA 8mm nut driver HERE!
amzn.to/3I4tx4B
Find your own 2 Cycle adjusting tool kit HERE!!
amzn.to/3IMn4vB
Get a compression tester like mine HERE!
amzn.to/3KM7Ibg
Get a spark tester like mine HERE!
amzn.to/3vIHUbM
Get your own digital tachometer like mine HERE!
amzn.to/3PQgtny
Find your own digital multimeter HERE!
amzn.to/38aX2FJ
Get some 12" hemostats HERE! I LOVE THEM!!
amzn.to/3tMvlvd
Get my FAVORITE pliers HERE!
amzn.to/36P5ud3
Get an Owl Torx drill bit set HERE!
amzn.to/3urvRze
Want a Endoscope like mine? Find it HERE!
amzn.to/3Ni71Ir
Watch my "Best Trimmer Head Ever Made" video HERE!
• The BEST TRIMMER HEAD ...
Get your own Speed Feed Head HERE!!
www.amazon.com/gp/product/B00...
Looking for the BEST 2 Cycle Oil? Find it here!
www.amazon.com/gp/product/B07...
My name is Bre. I took two years of small engine repair at the local college. When I left school, I fell into a wonderful job at a local small engine shop where I worked the counter for a couple years. In 2010 my husband and I opened up our own small engine shop in central Arkansas where I am able to work alongside my family and best friends. We see over 2,000 pieces of small engine equipment every year, and answer 1,000's of small engine questions. We specialize in brands such as Briggs and Stratton, Kohler, Echo and Shindaiwa, but work everyday on MANY other brands like Stihl, Husqvarna, Honda, Craftsman, Remington, Red Max, Troy Bilt, Scag, Bad Boy, Hustler, World Lawn, Poulan, Mantis, Etc.. Hopefully, my experience I share, will save you Time, Money and Frustration in the future!
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
Although very informative, these videos are for entertainment purposes. Please use all possible safety precautions when repairing and operating your small engine equipment. 
Хобби
Thanks for Watching! Find a link to all of my "Must Have", Favorite Tools HERE!! www.amazon.com/shop/chickanic?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfchickanic_9ERPFPBNGQ924P8NS63B
Agree with commenters that a clogged tank vent will produce a vacuum in the tank as fuel is consumed, resulting in starvation rather than flooding. An easy way to check the vent is to loosen the fuel cap allowing air into the tank, then tighten it and restart. If the problem is temporarily better, it's the tank vent. A bit of not well known info is: in the older type, the line will eventually press into the threads of the screws, blocking air flow. The slot on the screws is for aiding removal. If the line is replaced, PUSH the screws in, don't thread them in. This will keep the threads clear, providing a channel for air.
Love how engineers and designers make sure to incorporate so many tiny parts that you can lose when you're doing repair work on the job. They also make sure they are attached in such a way that they go flying off in some random direction never to be seen again.
We are under tremendous pressure to fulfill the ever changing government emission, recycling requirements and not appear obsolete compared to competitors. We don't get to make a lot of these design decisions. It comes from the product managers, business development teams and upper management. It is very easy to point fingers at the engineers. Our powers are limited. We do what we are told to, else we get fired and our replacements will thank us and continue to do the same.
They just had to invent ten millimeter fasteners too knowing every ten millimeter socket known to man and woman will vanish never to be seen again.
@@HeyYall398 There can be conflict between OSHA and EPA
that creates a paradox where doing the infeasible or impossible
is what is expected, so the engineers are perplexed what to do
to make everyone happy. Do like Volkswagen, falsify the data.
Now I always thought that a tank vent allowed air into the tank as gas is being drawn out to prevent a vacuum from being created that would stop fuel flow to the carb. In many 4 cycle engines, it's just a tiny hole in the gas cap. A bit different in some 2 cycles because of the crazy positions of operation. 🙂
The tank vent should be allowing air into the tank so that the fuel can flow out of the tank to the carb while not letting tank fumes and fuel leak out of the vent. If the vent isn't working its like holding your finger on a straw full of soda... the fuel stays in the tank and will not flow to the carb and the saw will either bog down or not run.
More often there will be a need for releasing over pressure from
gas vapors in the tank. Getting vacuum locked is a cold weather
issue more often. For either problem the field remedy is simply
loosen the fuel cap and let the excess pressure escape or let
air enter and snug the cap down and continue working. Poulan
and Husqvarna saws are airtight as a soda bottle, in reaction
to EPA restrictions which are the source of the venting issue.
EPA doesn't want a nanogram of fuel vapor in the atmosphere
unless it involves refueling their private jets and limousines,
because of course that is entirely virtuous escaping vapors.
@@artpatronforever The main reason to let pressure out of the tank is to prevent fuel from spraying out when the operator opens the gas cap to refuel a hot saw - a fire and safety hazard in the workplace.
Don't underestimate vacuum locking, every gas/liquid burning motor that has a sealed gas tank has a vent to allow air to displace consumed fuel. Fuel vapors from evaporation aren't enough to displace the liquid fuel and prevent vapor lock.
@@killer2600 I have 3 Poulan Pro saws. All run pressurized..
By design they are pressure fed. All 3 spit fuel spray because
CARB compliance systems are pressure captive. EPA doesn't
care about safety and are only fanatics about climate alarmism.
If a few loggers get burnt up EPA could not care less. 2 vintage
Homelite saws have different systems definitely NOT compliant.
Separate viton duckbill valves like used in purge bulbs will allow
pressure relief either direction for whatever exceeds the couple
of pounds pressure needed to open the slit in the duckbill valve.
The viton duckbill in a purge valve is likely good for improvising
a vent line termination using a purge valve under the hood in
the carburetor cowling if there is room, using whatever flow
direction is needed for that vent line.
@@killer2600 Yes, as Stihl learned the hard way with forest firefighters getting sprayed with gas as they went to refill their saws.....
How Stihl ever recovered from that is an anomaly to me.There were at least a couple of yrs where forest firefighters did NOT buy Stihl saws. And the 'fix' was a $100 kit to re-engineer their stupid, quick fill caps.
@@artpatronforever Hate to have to argue but I have 2 Poulan made saws, they both use duckbill valves in the fuel cap and neither one vents vapor pressure out the cap - duckbill valves are one-way by design otherwise they would leak fuel.
ive seen two problems with tank vents. first like you say the tank pressurizes and with an iffy carb will flood. the other is it not letting air in as the fuel level lowers. they slowly loose top end. those are easy just pop the cap lose for a second it will pick back up, you know its the vent.
I agree with John Grossbohlin, the only purpose of the tank vent is to vent the tank so fuel can flow to the carb. I was a Stihl dealer when they had to develop a vent that stopped fumes and liquid fuel from exiting the tank via the vent. This was no easy task, as the vent had to function at extreme temperatures, not get clogged with sawdust, and operate under tank conditions of negative, positive, or no pressure in the tank. There were several variations. The fuel is not pushed to the carb by pressure in the tank, but atmospheric pressure is involved.
LP-1200 Tygon line is what you want to resist pinching. It is also good
for other uses, but is not as soft and flexible as regular fuel line. It will
pull through tank grommets fine because the grommet will flex. But
when trying to pull the LP-1200 type line through a rigid opening that
has no grommet, the opening may need to be reamed slightly larger
because the LP-1200 fuel line won't easily compress enough to make
the same fit like a softer fuel line. But for replacement barb to barb
connections, or through rubber bushings it is a drop in replacement.
We all need to vent now and then
Thanks for sharing your knowledge!
On something like the 250 I just cut the line and put on an Echo vent on the end.
Those are super reliable and cheap.
Learn something new everyday! Thank you!
Love your tip on how to prep you equipment for storage over the winter. Thanks
I still use my dad's 40-year-old 028 WoodBoss, it's the best saw ever! I have only tuned it up twice in 40 years and still runs like a champ! I love your videos I learn so much. Thanks!!!
Thanks 👍😊 for your help and take care xx
Thank you for this very educational video, for me it's my first stihi I am learning everything I can about them
Thanks, Bre! Even my lowly little Poulan benefits from your wisdom!! Stay well! ❤
Thanks for helping us find ways to save money and avoid frustration with our machines. You explain things so we understand.
Thank you for teaching me so much about small engines! The depth of your knowledge is admirable! Thanks again. Looking forward to the next video! 👍🏼
I have learned more about my yard equipment over the past two weeks since I found your channel than I have in the previous two years elsewhere.
Love your videos, but, a tank vent controls vacuum in all gasoline engines, a solid ( or clogged) cap would starve the engine of gas, an open vent would allow gas and fumes to leak out, almost all small engines like this use a vacuum diaphragm type vent, which is closed when the engine is off, when it is running the vacuum draws just enough air in to keep the inside of the gas tank pressure balanced with the atmospheric pressure.
Hey! You just solved the bogging issue on my Stihl blower. Thanks!
Thank you very much for your video. I’ll be going to check my MS390
I would cut the vent short and push a sintered bronze filter up inside the vent tubing. They sell those filters on eBay. It's how they used to vent the tanks....easily, until they had a 'better' idea. A lot of the time they ran the vent(with the filter) to terminate in like the recoil assembly space.
Your notification bell wakes me up so I can watch your latest video...... it's 11.15pm, nice timing. Love your work ! 🙂🚜🐻 Bear Queensland Oztralia
Thank you for the pointers. I really enjoy watching your videos. Have a great weekend.
My 029 Super has been difficult to start after warm-up. I checked he tank vent and I bet you know already, just a bare nipple. I've ordered a new vent hose but the problem is, this saw JUST came back from the shop after I complained about getting sprinkled with fuel when cutting overhead branches. They replaced the tank filter and hose but never touched the missing vent issue. THIS VIDEO JUST HELPED ME FIX MY SAW! Thanks once again.
I appreciate you and your expertise. I never even realized there was a tank vent. ✌️
Well I learned something today. I always thought the tank vent allowed air into the tank so it wouldn’t create a vacuum inside your tank as it was running. Thanks!!!
Tamato/ Tomato She's sharing more knowledge than U.
Jealous?? or Threatened that Shes Smarter than U with Internal Combustion Engines both 2 AND 4 strokes as well as the oils and fuels.....
Me I'm secure in the fact that I Do Not Know it all, heck not even close.
Thats Y I can learn from these video's.
Bre,
KEEP UP THE GREAT INFO VIDEOS.
@@mikeholubek4419
Gee, all the man said was he learned something. You have to criticize someone for learning?
Maybe you feel threatened that someone could actually learn something from a woman?
@@mikeholubek4419 wow.....bit of an over reaction there mate. I thought he was acknowledging Bre's knowledge. Oh well.
That is the primary purpose of a tank vent. A sealed container of gasoline will build vapor pressure, the equipment maker may or may not want to limit the build up of such pressure. Watched a Wranglerstar video where he mentioned Stihl had an issue with pressure building in the tank and fuel spraying out when the operator opened the gas cap to refuel. It had to be fixed for safety/fire hazard and OSHA/workplace safety requirements.
Great videos!! Wish you were here when I started rescuing saws from the dump.100+ saws later.80% running now.Whoopie only got 2 hands🤔
I bought a new MS 250 in 2008 !
I really like the power weight ratio , great saw !
Thanks for the tip on that !
You do very well at this tech !
I love your site and I love your honesty thanks
Great information! Thank you so much for the lesson.
Great job Bre, I find the newer round vents are more reliable, but need to be removed and cleaned with shop air. Have a great day. Hope the oppressive heat and humidity has lessened a bit.
You're very wise I love watching your videos
I learn something with each of your videos. Thanks for sharing.
Just gave you a blast out on Alaskan Prepper. You are awesome!!! thank you for assisting us all to work hard and get sh*t done!
Thanks!!
Always upbeat, humorous, and cheerful! Awesome! Also like how you have a good mic while recording making it very easy to hear and understand you so I do not have to crank my volume like I have to with some other channels I view. Always real good visual aids. You are one of the best demonstrators I have come across.
My Poulan saw was bogging down and I went looking for the tank vent but didn't see one. However, I noticed the permanent air filter was really dirty. Cleaned it with soap and water and let it dry. Reinstalled it and the saw ran good as new. I did also clean up the spark plug since the lack of air made it run rich and fouled it up some.
Learn something new everyday I didn't even know they had one but that was the problem replace the hose runs like a champ thank you and yes it was missing but I cleaned it out put a new hose on it and like I said it runs like a champ now thank you
Used my MS170 today for the first time this summer and it was bogging so bad, I thought it was the high speed adjustment, and was about to go get a screwdriver and fiddle with it, but I said " lets try it one more time first" and it cleared itself and ran great. Going to check the tank vent tomorrow (: thanks Bre.
I So Do Absolutely Love this Lady. Going to check my 261. This may be what’s bogging dwn my Stijl. Greetings from Oklahoma.
I thought the tank vent let air air into the tank. The duckbill valves used in many saws let air in and not out. If the tank needs to be pressurized for the carb to work correctly then you should not be able to start and run a saw with the fuel cap off. Jusrt curious.
Thanks, I really appreciate seeing this post on the tank vents. Not something I have had an issue with to date. But I had a Husqvarna that was surging and had thought to look at the tank vent. But needed to replace the carb and the ignition coil anyway so wanted to see if that was it. But as luck would have it I replaced the carb and ignition coil on a Husqvarna 141LE and a 136LE and set the High and low to 1 1/2 turns out from seated and the idle screw to just past half way in and have slowly adjusted both ways and neither will start. And I can see the fuel isn't coming up the line on one. But it has a bad split on the little blue impulse line. I went ahead and replaced the intake boots on both and I used new gaskets on the carbs. So I'm ordering new impulse lines and will be checking the fuel tank vents on both now. I have never had a chainsaw give me much problem starting after a carb, ignition coil and fuel lines being replaced. But these two are certainly doing it. Not to mention my compression gauge says everything has 30psi, even my Stihl that is a good running saw. And the gauge is brand new. But it took me 2 months to need it after I bought it and that passed their return date. And they don't warranty closeout items. So I gotta go pick up another compression gauge to. But there is plenty of resistance pulling the starter rope. And putting my thumb over the spark plug hole has plenty of pressure trying to push me thumb off the hole. So I'm guessing that's good. Just won't know for sure until I check it right.
Anyway, love the videos. I'm more like the shade tree mechanic version of small engine repair and you have helped me through as number of issues when I was repairing a saw to resell and was stumped. I fell into the work by accident and needed a way to subsidize my disability check. This just fit. But it took a category 3 hurricane to show me. I will never again depend on a DeWalt 20 Volt sawzall to help get the roads clear enough to get out to check on the family and priorities I need to after a storm like that. I make sure I have 3-4 saws running good at the start of the hurricane season now and stock up on the common parts that tend to fail and a few of the ones that kind of make you scratch your head just to be sure I can keep my saws running. And I try to have a decent stock of saws that run good and I can sell fairly cheap for those people that are facing the aftermath of a storm without a saw like I did. That way they can pick up one that will help them get their property clear and maybe help clear the roads too. Always keep extra saws on hand for storm season. I'm hoping to have my Stihl 046 rebuilt and running before this one gets serious.
Awesome! Thank you!
Another very interesting video. Keep ‘em coming.
Good advice, thanx Lady.🙂
The tank vent only lets air into the tank. STIHL techs always check the tank. Should hold positive pressure and allow air in to prevent a vacuum as the fuel burns.
I agree, but so many people have said the vent is to vent out pressure as well; and, I watched a youtube video that said Stihl had an issue where fuel would spray out when the operator went to refuel. A safety hazard that they had to address/fix to comply with OSHA and workplace safety requirements. A charcoal canister would allow pressure to vent out while not letting gas fumes escape. Not sure if that's what their new vent design incorporates but it seems plausible. I've seen charcoal canisters incorporated into honda outdoor power equipment engine gas caps.
Thanks for the information, keep up with the great work.
this all makes me love my 044 even more
thank you , i will check my 290 this weekend 😁👍
Great advice there 👍🏻 had that issue once, was real headache to figure it out 😁
What to thank you for the review on the mix 2 cycle gas and oil .made a big difference. I will only use the red armor mix .your the best I watch you all the time are you help alot
Tanks for the info!
Well my Stihl MS260 is running great. Installed a new tank vent, new air filter and a slight adjustment to the carb and it's running fantastic!
Now it's on to the complete rebuild of my 2000 Stihl 046. I got it free as a box of parts when I purchased a Poulan Pro 260 and 262 for $20 for the pair. He was just happy to make a few bucks of saws he thought there destined for the landfill. I thought it anything I could strip the good parts, the clutch, maybe the chassis, bar studs, chain catcher, the engine shroud, starter and clutch cover, maybe the exhaust, pressure test the carbs and maybe rebuild them etc and trash the rest. Well in less than a week and with bare minimal parts I had both saws running beautifully and both where sold. That was 2 years ago. I still haven't touched the Stihl 046. But since I started processing my own wood left from Storm debris and trees people have cut down and need removed I started thinking the 046 would be a good saw to use with a chainsaw mill. After all I'm not processing anything larger than 12". Well at least that's the size of my planer. I guess I could cut larger and cut it down with the table saw. But I don't plan on cutting anything larger than my planer can handle really. So the 046 should be great with the mill. I just gotta rebuild it from the ground up. I'm not positive but I'm pretty sure there is a leak in the fuel tank and it may need a new chassis depending on the size of the leak. I may be able to patch it. Just not sure what will work and hold indefinitely being in constant contact with fuel add 2 cycle oil. And I'm not sure I like the idea of using an after market chassis. Anyone with any tips on how to patch a hole in a fuel tank I'm more than willing to hear what you have to say. After all a Stihl 046 that's in dependable running condition and hasn't been rebuilt with a bunch of Chinese parts has a nice resale value. I have the OEM Gasket kit order as well a several other parts such as the sprocket, carb, air filter and ignition coil. The flywheel seems to be in good condition, but I'm replacing the starter Pawls just in case. The springs look weak. I might as well replace the starter spring while I'm at it. If it's original most likely it's got plenty of wear on it to. I guess it's a good thing I started with rebuilding all those Poulans before I tackled this one. I have about 18 total rebuilds under my belt, just not a Stihl. Any tips would be appreciated.
First I’ve heard of a set screw inside of a vent hose. Maybe you could explain how the set screw is adjusted and when and why.
Thanks ahead of time if you get to explain this.
Thx for the info.
On the Stihl NS250 cut the rubber vent hose about 1/2 inch from the vent cap and also somewhere on the top run of the vent tube and replace with a piece of copper tubing that is hand bent and then slip it inside the vent hose and that will not ever kink. Be sure the copper tubing fits snug into the vent hose so it will vent properly. I have done this to a vacuum line before on one of my vehicles and it worked great.
Thank you. I have a 250, now I know what to look for.
I always had this problem with Stihl. I switch decades ago no more loose bolts or bog down. I just go to the woods and cut firewood. I used Stihl from about 1980 to 87 I watch a old man come out the woods very fast with a truckload of wood. With some little Husqvarna I got real interested. I had a 028 and a 041 Stihl every truckload I would have to fix something. I went to town and bought a 50 Husqvarna in 1987 cut truck load after truck load no problem. I was thinking this is really nice. I still have that 50 and runs great.
Thanks for the neat tips.
Good advice thanks
Great video and a great tip. you are really good
Thanks for the info ,!
Ya know i always thought the vent was through the cap good info thanks
Dam, you're good! Not two hours before I saw this video I found the same problem with a pinched vent line on my MS 210. I think the tank was being pressurized so much that fuel was being pushed up around the fuel suction line grommet. I will look especially close to prevent this from happening again. I keep learning from you gal.
I have a Stihl 025 that i replaced the original tank vent to a newer version from a MS290. Great saw for it's size
And just for the sake of it.. im now going looking on my stihl..
Cheers chick...
Theres you and one other account i follow.. and Im bloody grateful for what ive learnt... ha ha... now if only i could master the art of sharpening a chain....
Learn a lot new stuff on this channel.
When I hear the symptoms, my first thing is checking spark arrestor. When asked, many don’t know what or where it is.
That's really good. Time to customize Stihl chainsaw with the Dremel. Got to have room for the vent tube.
great content and thank you!
A very helpful video.
Nice job
Thanks for the video take care.
Great info!! Thanks for the great content !!
Good tip
that was my problem...THANK YOU
Love you video. Very very helpful. Learn so much at your channel 😁🦜
Great information thank you.
Thank you. Love the cat!
Those vents, I always thought should act like a one way foot valve. It got me confused. But with a capital "B" , knowing an engineer invented it slams the door on common sense. Great video as always.
tank vents also have a check valve in them newer models
Great video I learned alot from you
Great venting video Bre but you're giving away all our secrets!🤣😭
Awesome video thank you so much I bought my wife a 260 or 026 and it will start and will not rub it is bogging cannot figure out why I might know now thank you I will have to check that once again love the video thank you
Good video !
Check your factory installed mud dauber!
Bwahahahaah!!!
God i never knew about the tank vent. I still have a well loved 029. Thankyou.
The vent allows air into the tank to replace the volume of fuel that has been consumed. The vent allows air in since removing the fuel generates a negative pressure in the tank. While allowing air in it prevents fuel vapor from escaping.
Great....Thanks!
Current tank vents never let any air out, only in. They are one-way valves. If you are flooding, it is because the metering valve is not seating correctly. Tanks never develop more than 3-4psi pressure and all carburetors are designed to handle at least 7psi pressure. I own a small engine shop and specialize in Stihl equipment.
Nice info on the saws
Hi between you and Steve small engine have be a big help with my chainsaw mower
Have a ms250 That I had for a while. Bogged down and die on me. It start right back up and run for a few seconds and this bog again and die. After a few times it would start. First thing I thought was compression. That checked good. spark was good. So only thing left was fuel. Saw your video and soon as you said tank vent i paused the video and checked mine and noticed it was pinched in the back as you explained in your video when I Finished watching it. Fixed it and seem to run good now. Sometimes you just forget to check the silly stuff. Thank you
Love your videos. I have a stihl ms 200t that I didn’t think had a tank vent then looked and found where it should be, but can’t find the part anywhere 🥲
Just to let everyone know Stihl has a new design gas vent which is behind the front pull cord cover at the top of the tank. It is a small rubber piece that fits right into the tank. Very hard to find. After time the rubber closes up. If its still pliable you can take a hot needle and open up the center. If not its about a 10 dollar part.
Also, that little hole in your riding mower gas tank cap is there for a REASON! Ask me how I know. Fiddled with my mower once for 30 minutes until I stuck a toothpick through that hole...and fixed it.
Any thoughts on what to do with a plastic carb that's glued together so you can't access the jets to clean it? Thanks for your great channel.
I have an old shindaiwa blower that I have to slowly adjust/ let off the choke once I start it to keep it running. Basically takes a long time to warm-up. Once it is warm and I have fully let the choke off (after several minutes of letting choke off a little at a time) it runs great
I mix my own fuel (I use the Stihl mix and I know you said run wide open with that oil which in blower I do) and I rebuilt carb. Any suggestions ?
Chur you rock!! NZ