OUR NEW STUD PACK 2 CHANNEL!!! More work, more videos!!!
HTML-код
- Опубликовано: 2 ноя 2024
- Hey gang, we started this new channel to give you all more content! In this video we are installing the soffit, the LED’s in the Niche, AND having a ton of fun. Hope you all enjoy it!
couldn't find the channel after it was mentioned on the main, but low and behold the almighty algorithm has graced me with your pressence.
Same!
Same
It was linked in the description
@@qwerty112311 initially it was not.
@@qwerty112311 I think the issue is that the link "looks" weird. It's like a RUclips "button", not a traditional link :D
Now, that is something I wanted to see, the struggle to find solutions, and the process behind it. Good job, guys!
“Stud Pack: Reframed”. Framing, studs, camera, frame. You feel me Jordan!!!
Nice, I like it!
I think instead of the soffit on the shower, I would have just added some PVC trim at the ceiling and called it good. A nice 3/4x3" square cut around the top of that tile would have hid the edge nicely, and given it a finished look without all the hassle. The new channel seems exciting, y'all! If nothing else, a 2nd can light would even out the shadows in the shower, especially when you're in there washing up! Happy birthday (s)!!!
I'd use Boat Twist Latches. Make a French cleat (or metal equivalent - two C channels?) to hold the top end, and a rail at the bottom edge to latch to. Install marine twist latches at the bottom end of the... pendant ceiling(??). Hang it from the cleat, rotate up and twist the latches. Locking latches might feel safer, but outside of something catastrophic they're not going to move. I would suggest inspecting them once a year to be sure everything is staying solid. Rust-o-leum of course (or similar) for all the metal pieces. You'll need to clean the dust and mold out of it at least that often anyway 😛
soffit niche moisture mould trap ... good luck!
My concern too. We'll see though!
Got to love Rad’s safety flip flops. Same here was wearing on the job with the Perkins Bros
I really enjoy watching you guys interact and work together. Rad has been a great addition. Looking forward to supporting the channel for a while.
this is what i like to see. the true difficulty of trying to install items to finish the job. this is what ppl dont see, and then ask why it took so long. they never see how much effort went into completing a job.
I was thinking the same thing when I was watching. Every single project has problems and complexities. This shows the thought and behind the scenes. I like it
Woot woot Stud Pack 2 fast 2 furious...lol. Just a tip for any kind of twist/screw carabiner; from the climbing world we say, "Screw down so you don't screw up".
Love your new channel! Especially the relaxed feel & behind-the-scenes stuff. 👍🏼👍🏼
FWIW, if y’all ever build one of those hanging soffits again… look into using GoBoard instead of drywall (so light & completely mold resistant), 1x4 PVC rather than wood, & hot mud rather than regular drywall mud. (All way better in wet locations & the weight will be 1/2 or less.)
As for hanging it all: if it’s angled like this one, use gravity to your advantage… put 2 pieces of unistrut on the ceiling (top & bottom edges) & reverse 2 pieces on the soffit… will give you 2 channels that can slide together (from the side).
Awesome video brothers!!! Congratulations on your newest venture! I love the new "behind the scenes" style...personally I like it better because it's more of what I watch your videos for.
I've been in the trades since I was 12 years old and put my hands on a chrome plated circular saw and squeezed the trigger! Like you Paul, I have been fortunate enough to have taught my son and daughter what I could, both on the payroll! My son has continued and is a Journeyman Electrician, and my daughter is with the Department of Justice!
I am retired now living in the Florida Panhandle, bad knees and all...bought a 60's Rambler and will ultimately reno the entire house. Definitely did not count on the knees and materials going triple gonzo in price!
So, as I sit amidst the unfinished debris of my dreams, I truly appreciate your hard work, and seeing your dreams come true...
Keep up the great things, stay safe and humble my brothers! Love y'all!
Much appreciated thanks!!
I dont think a separate channel was required, but none-the-less, here I am!
the way youtube works if they dont wanna "tank" the main channel its the way to do it
@@samch.8351 all bow down to the algorithm
Yeah how the F did I get here ? 😂
@@samch.8351 - Mind expanding on that a bit for those of us who don't know? What about the content on this channel would tank the main one?
@@PlucharC idk how to explain this in a short comment so I recommand you go watch some video about that stuff on youtube some youtubes talks about it but Its about youtube aglorithm
Basically if you always post a 1h video every 2 weeks and it gets an avrg of 500k view if you start posting "lower" perfomance video in between it can "confuse" the aglortihm and it wont recommand your videos to as many ppl so its better to have a channel for the "big" and well performing video and another one for the smaller stuff so you can try format and see how its received by your audience without "risking" your relation with the aglorihm on your main channel,
I hope that helps
Rad is hilarious! "And a white light" 🤣
LOVING the raw footage and seeing a lot more of the personalities come out as well as the raw thought process.
My wife and I have smart bulbs in our bedroom lamps. Using them in color mode messes with your mind. We have it on orange for a soft evening lighting and it makes things subtly a different color in weird ways. Like you're eating some chips in bed and the look bright orange but the rest of your food looks normal. Just make sure the bathroom LEDs are off when you're color coordinating your outfit in the mornings XD
edit: also love the playful banter b/w Jordan and Paul. After watching the other video where Paul and his wife add the lights to the kitchen, it's clear to see they have a healthy marriage where they feel safe taking little jabs at each other. Nice to see Jordan grew up in a house that promotes that love and safety. "I was gonna take half the trash can" lol
More personal. Very good guys. Sitcoms on T.V. do very well when they show every day common people doing everyday common things. People like to look in on the lives of other people who share the same situations in life. I think you hit on a good idea here. I will certainly keep watching. I'm already subscribed. Thanks again. Pete in Florida.
Bingo.
I love seeing the “step back and look at it” and all the dialogue!
“Not today, Zurg!” My childhood… love when quotes from childhood show through with other people.
Awesome! I can't imagine how much extra film you guys have accumulated. Looking forward to it.
I'm excited about your new video. I enjoy watching both videos. I also learn from your videos.
Finally found it today! Fun behind the scenes, looks pretty much like a day in the life of those of us who solve problems we create ourselves. :-) I'll be watching for more fun times, lol
I would have suggested magnets to secure the free-swinging end of the soffit. Magnets mated together can be very strong and more can be added to get the strength right. That would give you the ability to easily drop the soffit for access to the ceiling.
Brilliant!
Fun. I appreciatred seeing this other side of the pack. Good work.
Wasn't able to find the channel but it was worth the patience. Loved the video. Looking to more.
Love the casual nature and the candid moments
I love, love, love, how you pay attention to cleanliness on the job site. ❤❤❤❤❤
It’s cool to see the background behind the scene. 🎬
New channel feels more like a hangout. Loving it!
Yay, Raul, Gordon, and Brad!
Wow - you guys are trustees of a special piano - and all of those banker's boxes! Thank you for being willing to care for these materials - I know its a responsibility - perhaps a burden at times. Blessings!
wall wash lighting looks better and you're spot on about it diffusing the light around the room.
One trick that I use to drive eyebolts is to set a hook bolt into the drill, line the hook up into the eyebolt, and run the drill slowly, so that the hook drives the eyebolt.
I was just going to say that to the Studpack team 😂
Soffit will fill up with water guaranteed 😂❤
Nice idea though to hide the awesome access panel. Add a few weep holes when you get water inside it.
Love everything about this! Been watching you guys since 2020
Struggle, struggle, struggle. Ahh! That soffit feature was probably harder to get finished than the rest of the bathroom fixtures combined.
Can't go wrong with more Stud Pack! I didnt stop smiling through the whole episode. Ya'll are awesome!
FUNNY STUFF!!! I love the light heartedness of this new channel!
Hey Jordan! Depending on your LED Driver, you can swap the driver out to at least allow you to get a controller that sets the strip to white (despite it being all three RGB on). It may looks close enough to white and with the diffuser might not look too far off from a kind of 'cool' white. Otherwise, replacing the whole strip in the future will of course be the best route to get you a nice white (make sure you look into RGBWW and RGBCW as well in case you want the cooler or warmer 'white' in there).
Also, mentioning Home Assistant again as something to check into if/when you get some tinkering time!
Love the shenanigans, you three seem so much like my own family I just love to see every single video pop up. Well wishes from Michigan!
Agreed, for an accent light RGB lights can be white enough. They can be any color, even warm white. They don't have good color rendering, so they arn't good for general illumination, but just as an accent color the white they produce is fine.
Jordan’s insufferable, defeatist attitude makes this so much more fun than just hanging a floating soffit 😂
It would be awesome to do a project with these guys 💪🏽
I’m here guys ! Looking forward to the extra episodes!
One of the few things that got me on this build was how heavy duty that first soffit was. I was thinking “Really?” Everything else has made perfect sense. Glad you changed it.
Hey if all else fails on that soffit, you could still do some round over (1/4 round actually) trim pieces made out of marble and just get rid of it! Would require buying a round over blade for a wet saw! I think home depot might rent one of those possibly! Or you could just buy one at harbor freight, rent a saw ,and ,run several trim pieces! Marble is soft and it wouldnt take too long! Then install them at your leisure!
Love the extra content of channel2
Paul is one of the best people on RUclips, more Paul is always a good thing.
Looking forward to more Stud Pack content!
Double the stud pack? Hell yeah!
Custom work I love it!! The problem solving keeps ur mind sharp!!! Nice work!!
Thanks for bringing us more Studpack!
These are a fun change of pace! Looking forward to both channels!
I'm super excited about this second channel. Let's go!!!
Jordan was ready to burn the place down over that soffit, and anyone who's ever finished a house out knows that feeling.
Yeah, this is good. Very funny trio and I like the road trip at the end. Thanks guys
I like it, but when it start collecting water and the paint peels, perhaps build it out of aluminum and pvc and also add some drain holes on the lower right end for the condensation to drip out. As it stands now its looks like a wooden bowl to collect water.
There is a large volume FanTech exhaust fan inlet in the ceiling. I think Jordan bought a humidistat to control it. The fan runs until the humidity is at a set point. I'll keep an eye on it though
I’ve stood and looked at stuff I’m building for long periods of time too. I’m glad pros have to do the same thing!
That was a fun, different look at "the crew". Looking forward to more!
I thought sure you were going to do some sort of cables attached to the soffit and through the ceiling into the attic and use turn buckles to tighten the cables 'till the soffit was straight. Glad you figured it out. Congrats on the new channel !!! Keep up the good work.
This verison looks much better. Nice job
Sliding the soffit on is a good idea. You could get it way closer to the ceiling, which would look better.
Stud Pack squared! Another great video to learn stuff
I missed you guys the last few days and need to catch up. I love the new channel. Studpack LED Garondo Uncensored! Lol
Soffit mount could have been done with a piano hinge at the high end for easier access when needed
Love it, more studpack!
Thanks for the overflow content. You cant hide Nasty Money
Both channels are awesome. Main channel has a polished quality to it, while SP2 feels a lot more intimate and off the cuff. Love your content guys!
I would've used a modified french cleat to hold up the soffit. It would be easy to slide on and off, you only have to be accurate in one dimesion since you have wiggle room in the other, and it could still be locked in place.
Dudes. Great idea. Love seeing this stuff. Paul, I hope to be this close with my boys as time goes on.
Wanted to drop by and check this out. Huge fan of the main channel. Pro tip…. Background music helps a lot even when you’re interacting. Im sure you have good reasons why there is no music in the background but the silence is very loud my friends. Thank you for all you do gang
I like the quiet.
You need 4 eye bolts on each side two top two bottom and slide stainless pin through to hold it. Use washers and cotter pins to keep rods from coming out eye bolts
What a fun bunch! That’s awesome
Great video!, looking forward to seeing more!
This is awesome, much more relaxed and candid.
I love Paul, but i do love seeing Jordan and Rad as well!
Thanks for the second channel. Can't get enough Stud Pack.
I love the much more chilled out just-filming-it-as-it's-happening vibes you've got going on :)
Good luck with the channel. Sounds great!
RGBW will give you a single white channel. RGBCCT will give you 2 white channels - one for warm white, and one for cool white which would let you dial in that white that you want. RGBWW will also give you a higher intensity white if both white channels are on.
Then there's RGB ACL which is complete overkill, and more suitable for cinematic or photographic lighting where you get even more colors, if you really wanted to color match something.
Holy smokes! Thanks for the info. 😮
So glad to join you guys over here on the premier video of your 2nd channel. On moving pianos: a professional once told me they were really top heavy. I tried to relay that info to a friend who was moving. He insisted that, if we go really slow, he could stand in the back of the truck and hold it. We only had to go a few blocks. On the very first turn, the pickup truck was traveling maybe 3 mph (if that much). I was in a car behind the guy. I watched as he fruitlessly struggled to hold onto the piano as it slowly tipped out of the truck bed onto the pavement. It shattered into a gazillion pieces.
Holy crap! RUclips's algorithm finally worked. I didn't know you had a second channel, but they FINALLY recommended something worth watching.
Like the second channel! Just let the camera run. More casual.
Next time you do LEDs you should reach out, RGBW, RGBWA, etc. Tons of options, drivers and home automation tricks.
For sure. And getting into WLED, Home Assistant and scene controllers for manual overrides without a fun.
Anything that gets more Studpack into my feed is a good thing :).
A nice tip for eye bolts, put the handle of a ratchet in them and put a deep well socket on it to use as a handle. Works great :)
Could use some high tensile stainless steel wire for pictures and tie an SMC knot onto the quick link and the screw eye to get the perfect drop on the soffit regardless of the small space. Knot is used all the time with arthroscopic ties eg small spaces
SUBSCRIBED!
This is a fun channel. I like the behind the scenes stuff. Now we get 2x the Stud Pack fun!
love the second channel guys, fun video
I mean we all knew you had an awesome family. You didn't have to literally rub it in our faces. 🥳😅
I wasn't expecting the SP2 channel to still filming projects in the same regular project you've been filming for the last 8+ months??
I love Rad’s Hawaiian work boots hahaahha
Great vibe!
You guys really are my favorite youtubers
StudPack 2 is an awesome idea
this idea was an awesome one💙💙💙💙
Awwww shit… more Saturday morning cartoons!
Yeah I loved those in the '60s when I was a kid
@@StudPackTwo and I got to watch those reruns in the 80’s! Love you guys!
glad u have a second channel.
What's done is done, but here's an idea...
Soffit on long drawer slides 👀
Rust.
@@Stashmo stainless steel.
@@snymat_68 Not sure there really are fully stainless ones, including bearings etc. . Advertised, but not tested. Plus, awkward installation.
They might have split the panel into two halves with final assembly at center line.
I have a small Y shaped bit for my drill driver that was made for tightening down eyebolts.
Having 2 channels is great. I don’t like long videos but can find the time to watch 2 separate videos that don’t need to be watched back-to-back.
love how Studpack 2 is like watching family
Bring on more stud pack!! Looking forward to more content fellas.
I have already laughed so much love you guys thanks for starting this channel this made my day
Thanks for the invite! Even smashed the like button for you!
Twice the stud pack!! Twice the fun!!
Love this new channel, more laid back behind the scenes stuff