Hey, Shawn. I grew up about two blocks away from your shop in Medford, but I live and work and tint in Fort Worth, Texas now. Love your videos man. Great techniques, great care for the work. About these F-Series pickups. That foam strip is a nightmare for windshield installs, but they can actually be removed and replaced after the fact. A quick dip with a pick can pull the edge up by the vin plate and allows you to remove the strip. You can either leave it out, which doesn't affect the windshield much past some minor sound deadening, or it can be replaced after the tint is installed with a quick spray of soapy water and slipping it back down. There's a hard edge down there that prevents the strip from going too low unlike on some of the mustangs. Love the videos man, and I hope I can stop in and say hi next time I'm up in the Medford area.
pull the rubber out of the bottom of the windshield , just a little adhesive on the bottom of it, it goes right back the same way as you pull sweeps from doors
This is how i know im a great window tinter, you did literally everything i would when installing the windshield. As close to the bottom so possible, flipping the mirror back and forth, tucking past the foam seal once you gave the whole film installed etc. I may have to come work with you, I’m 6hrs away in Buffalo NY😁
What’s up man, i own a wrap shop in Glen Cove, Long Island. Never knew you were so close by..anyways just wanted to say thanks for the videos, your videos helped me take my tinting skill to the next level when i was first starting 2 years ago.
What's the worst car u have ever tinted as in stuff like that foam being in the way? Thats a pretty nice strip. I wish u could post pictures. I did I thunk a 16 inch strip on one of my s10s and it was perfect I could see rite under it laying back a bit then if driving into a sunset or something bright just sit up a little bit and look threw the tint and stop the blinding light shining in my face
why bottom load? i just know you had to get some dirt specks in the middle of the glass and on the side from the gasket and the film touching on the door
Sean how big is your shop? And how much do you pay for rent? Can you tell us a break down of it? I’ve been looking for a shop and it’s a bit difficult to find the right shop
Great vid shawn. How come you dont take the bottom seal out on the windshield? Ive done quite a few like that and its still sticky so you can put it back in
Try the Black rifle coffee. Holy shhh. I tinted 3 vehicles in less then 7 hours. And one was a removal and retint. A car sedan. Then a F250. Easy. If your good. And a mid size suv and windshield. I was going. You can find it at 7-11 or Amazon. @windowtintwarrior
Hey, Shawn. I grew up about two blocks away from your shop in Medford, but I live and work and tint in Fort Worth, Texas now. Love your videos man. Great techniques, great care for the work.
About these F-Series pickups. That foam strip is a nightmare for windshield installs, but they can actually be removed and replaced after the fact. A quick dip with a pick can pull the edge up by the vin plate and allows you to remove the strip. You can either leave it out, which doesn't affect the windshield much past some minor sound deadening, or it can be replaced after the tint is installed with a quick spray of soapy water and slipping it back down. There's a hard edge down there that prevents the strip from going too low unlike on some of the mustangs.
Love the videos man, and I hope I can stop in and say hi next time I'm up in the Medford area.
Thanks for these awesome videos. Thanks to you and your great way of explaining things, ive been able to become a better tinter
These strips are usual down in Louisiana ppl are crazy man😂 good work looks great
pull the rubber out of the bottom of the windshield , just a little adhesive on the bottom of it, it goes right back the same way as you pull sweeps from doors
I'm watching your video well. The work process is very professional.👍🏻
I’m a subscriber!! Watched your videos and I’m about to take your class in February 💪🏻💪🏻
Live!!
I love tinting ford trucks. Except the 250 with that dang foam strip at the bottom lol
Say the word Coffee and the NYer comes pouring out of you lol.
Dude these videos are awesome man let’s go!
This is how i know im a great window tinter, you did literally everything i would when installing the windshield. As close to the bottom so possible, flipping the mirror back and forth, tucking past the foam seal once you gave the whole film installed etc. I may have to come work with you, I’m 6hrs away in Buffalo NY😁
Loved the video and can't wait for the livestreams!
What’s up man, i own a wrap shop in Glen Cove, Long Island. Never knew you were so close by..anyways just wanted to say thanks for the videos, your videos helped me take my tinting skill to the next level when i was first starting 2 years ago.
glad you are BACKKKK!
Been waiting for another one of these!!
I also do continue this working above 8 years in Malaysia..
im moving to Nevada but if i was there id definitely apply for a position !
Oh hey it’s Sean again!
Hey man we need more of this love watching your videos when I’m not tinting
Get yourself a tru spray keg. Way better than the pump
Good work. watched all 25:22 mins
Great Job On Spotting That On The Driver Window 💯
Good work dear 👍
You have to do a video with a chameleon film 🔥
Do you reccomend a place to go learn how to window tint? school?
We have a Window Tint Hands-On Training class and an Online Course! Both are linked in the description
What's the worst car u have ever tinted as in stuff like that foam being in the way? Thats a pretty nice strip. I wish u could post pictures. I did I thunk a 16 inch strip on one of my s10s and it was perfect I could see rite under it laying back a bit then if driving into a sunset or something bright just sit up a little bit and look threw the tint and stop the blinding light shining in my face
I’ll hire you in Arizona 😂
looking jacked!💪
We call that the BroDozer package.
why bottom load? i just know you had to get some dirt specks in the middle of the glass and on the side from the gasket and the film touching on the door
reverse roll gang!!!!
Hi why dont you guys work with safety film on the cars
Let’s collab the Florida shop 😏😈
Hey miguel from Florida we a spot here in Florida
I need a job but new York?!
would you allow me to use the window Tint Warrior logo for my profile ... as an amateur film repairman from Indonesia
LIVE LIVE LIVE LIVE LIVE LIVE
no rope at the bottom of windshield .
What type of light do you have?
Sean how big is your shop? And how much do you pay for rent? Can you tell us a break down of it? I’ve been looking for a shop and it’s a bit difficult to find the right shop
What does the dryer sheet do exactly ???.
Live!
Great vid shawn. How come you dont take the bottom seal out on the windshield? Ive done quite a few like that and its still sticky so you can put it back in
Very well thank
Dose wat kind soap u use make a difference could i use dawn ?
Where can i set an appointment?
No more popping panels?!
What software u use ?
Tints by jay!! 😂
👀😂
What heat setting do you use? For shrinking?
Max
i like that xpel shirt my rep if your watching this please hoooook me up haha
LIVE PLEASE
smoking more helps with the red eyes.... wait what?
Huh
yes@@DaddyC445
@@DaddyC445 nice play list btw guy
This dude didnt even place a cloth or towel over the backseats while doing the back windows. What an amateur!!
Live
Live put in titok better 🎉 🇺🇲 🇩🇿
Try the Black rifle coffee. Holy shhh.
I tinted 3 vehicles in less then 7 hours. And one was a removal and retint. A car sedan.
Then a F250. Easy. If your good.
And a mid size suv and windshield. I was going. You can find it at 7-11 or Amazon. @windowtintwarrior
Live!
Live
Live!
RUclips or multiple platforms my vote