Boost Axle Adapter Kit

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 16

  • @sladeoriginal
    @sladeoriginal 10 дней назад

    I do believe you the nonboost hub has to be 15x100, not 9x100QR. Please correct me if Im wrong. I want to be wrong because I have a lot of 9x100 wheelsets that are useless when upgrading my forks.

  • @NonLegitNation2
    @NonLegitNation2 7 месяцев назад

    what about with a rear wheel. I just bought a thru axle rear wheel and I'm not 100% sure, but it might be 142mm boost instead of 148 like my frame requires. I bought an adaptor kit 142-148mm which came with 2 spacers for the axle and then a spacer for the brake rotor. Do I install both spacers on the drive side or the non-drive side? And if only on the drive side then would I need the spacer for the brake rotor?

  • @jetbryan123
    @jetbryan123 Год назад +2

    do you have problems with alignment of the brake calipers and rotor ?

    • @8584zender
      @8584zender 4 месяца назад

      Usually no. The rotor spacer moves the rotor 5 mm outboard which is where a boost front hub would put in. You’ll still need to adjust the caliper to your rotor with the built in play on the rotor bolt holes.

  • @guamistheplace
    @guamistheplace 2 года назад

    Hi . Wandering if you know what a 2021 giant talon 2 runs for the front wheel. I converted my fork to a tapered fork and would like to know how to convert my stock front wheel to run on my thru axle rockshock recon. Would the answer be to buy the "problem solver thru axle kit 100 to 110" work?... I did buy a second wheel but would like to run a different front wheel without buying a third new front wheel.

  • @raeesstemmet9656
    @raeesstemmet9656 3 года назад

    Thanks for the great vid

  • @brockpalmer9799
    @brockpalmer9799 Год назад

    What do you mean by "special adapter on the rotor"?

  • @AlexSantos-eo9kl
    @AlexSantos-eo9kl 3 года назад

    Do you need to redish? Is this the problem solvers booster?

    • @8584zender
      @8584zender 4 месяца назад

      This looks like a generic one but the problem solvers works the same. It’s a front wheel, no dishing.

  • @Zven-Zon
    @Zven-Zon 11 месяцев назад

    Couldn't you just replace the hub end caps? and also add the rotor spacer.

    • @8584zender
      @8584zender 4 месяца назад

      Yes, but those are proprietary for every hub whereas this is just a 5 mm washer so works with any hub.

  • @kylemendoza
    @kylemendoza 3 года назад

    What rotors are those

    • @vermontbicycleshop
      @vermontbicycleshop  3 года назад

      Hello! These are Clarks 160MM Stainless Steel 6 bolt rotors.

  • @topwater4427
    @topwater4427 2 года назад

    Where can I buy this kit?