Hey there. so I upgraded to a 1" proportioner today. I'll be testing it over the next week or 2. You were right. What I noticed is the 1" lines to the half inch proportioner even with 1" coming out was starving the pump after watching the flow. Wish me luck.
Nice affordable alternative to 12v system 👍 Have you considered just using the reel for hose storage? Place multiple sections of hoses on reel (1-100’ & 2-50’ 🤷♂️) and pull off what ya need and bypass the reel restriction with a mounting block beside reel to quick connect directly from pump to your 5/8” hose… lil better flow maybe? 🤔 might save reel from corrosion too… just a thought.
This pump will be better than a 12 or 24 volt system. I'm sure more reliable as well. Once the company makes their money with this one inch pump they could upgrade to the Comet P40.
So are you and fresh rinse selling these set up like in his video or yall just showing what it can be? I was about to buy an ar45 but im a part time washer so this would be more my speed. Not like im gonna be using it daily
@@joshuapoche5137 we are working on getting the exact setup on the website yes! Hopefully within the next few days. Engine might vary between brands however. Same engine different makeup is what I mean…
@@brucetrotzuk7486 yes that’s what I’ve done with no problems. The pump doesn’t build pressure when off the gun. It’s doesn’t heat up either. Or at least hasn’t since I’ve had it. Again I just wouldn’t go unnecessarily long with it off the gun
This is a newbie question. You make no mention of it, but I see you have a big water tank. I guess this means you have to use a big water tank? And if so, what's the minimum size you would recommend
@@hpankie good question! So you can use a smaller tank this is just what I have on my trailer! As long as you keep your tank fed with water you will be alright. Unless there is low water pressure where you are located. In my area I can’t drain water faster than I fill it with this machine
Also, one other thing, I had someone tell me (not sure if I believe it) that the pump will only last one day due to the SH. Any truth to that in your experience so far?
You can follow mikes videos over at the fresh rinse for more consistent update videos! He is going to make multiple videos on this system and just posted one today on it!
I've tried and tried to make this work but I just cant get it. Totally bummed. I followed your directions but I am trying to run through a 1/2 proportioner and 1/2 hose. Wondering if that is the problem. I'll have to try later.
TY for responding. I can get it to draw straight from a bucket through the hose reel but once I had the proporitoner I just get nothing. using 1" braided hose from the proportioner and the 1" coming from the engine.
I ordered three Remco 7GPM 100 pai 12V pump last night, wish I had seen your video first. I will definitely look into your setup and buy your kit.
Hey there. so I upgraded to a 1" proportioner today. I'll be testing it over the next week or 2. You were right. What I noticed is the 1" lines to the half inch proportioner even with 1" coming out was starving the pump after watching the flow. Wish me luck.
Nice affordable alternative to 12v system 👍
Have you considered just using the reel for hose storage?
Place multiple sections of hoses on reel (1-100’ & 2-50’ 🤷♂️) and pull off what ya need and bypass the reel restriction with a mounting block beside reel to quick connect directly from pump to your 5/8” hose… lil better flow maybe? 🤔 might save reel from corrosion too… just a thought.
Yes I have tried this! It didn’t seem to affect the distance much either way so I returned to using the hose reel.
Thanks
I’m building this asap, this is gonna be awesome for roofs and not 5k
@@SuperiorShineSoftwash bingo! Glad you like it!
Do you have a sheet of everything and the names/sizes by chance? Unless you want The 3000 views lmao
deltasuds.com/products/soft-wash-4 the parts would be a lot cheaper from here than they would be for you to source yourself if that’s what you need
This pump will be better than a 12 or 24 volt system. I'm sure more reliable as well. Once the company makes their money with this one inch pump they could upgrade to the Comet P40.
So are you and fresh rinse selling these set up like in his video or yall just showing what it can be? I was about to buy an ar45 but im a part time washer so this would be more my speed. Not like im gonna be using it daily
I second this question
@@joshuapoche5137 we are working on getting the exact setup on the website yes! Hopefully within the next few days. Engine might vary between brands however. Same engine different makeup is what I mean…
I’m wondering how the entire thing would work if you ran it through a 1” reel then to 3/4” flexzilla.
Would be something to test!
Is it able to recirculate or does it not matter when you are not on the trigger?
Doesn’t matter really. Just try not to do it unnecessarily long
@ Thank you for the quick reply, I see Mike says easily 10 minutes thus far …..
@@brucetrotzuk7486 yes that’s what I’ve done with no problems. The pump doesn’t build pressure when off the gun. It’s doesn’t heat up either. Or at least hasn’t since I’ve had it. Again I just wouldn’t go unnecessarily long with it off the gun
This is a newbie question. You make no mention of it, but I see you have a big water tank. I guess this means you have to use a big water tank? And if so, what's the minimum size you would recommend
@@hpankie good question! So you can use a smaller tank this is just what I have on my trailer! As long as you keep your tank fed with water you will be alright. Unless there is low water pressure where you are located. In my area I can’t drain water faster than I fill it with this machine
@@AdvancedSoftwashLLC so, the idea is to keep the customer's water connected to your tank?
@ yes
It makes money!!!!!
Get a new check valve for your bleach
Also, one other thing, I had someone tell me (not sure if I believe it) that the pump will only last one day due to the SH. Any truth to that in your experience so far?
No problems with mine. Some people are just haters
@@AdvancedSoftwashLLC LOL that they are
Would this work with 3/4” metering valves?
@@rmass68 not likely, but will reduce your flow. I’d try to stick to 1 inch.
Thxs!!
Can you please make a complete parts list
You can get everything from deltasuds.com/products/soft-wash-4 and it will be a lot cheaper than sourcing the parts yourself!
Any more updates?
You can follow mikes videos over at the fresh rinse for more consistent update videos! He is going to make multiple videos on this system and just posted one today on it!
i bought a 12v bleach pump. i only used it once and it locked up on me.
Exactly the reason why I swapped to this machine. Way too many problems with 12v systems
What hose reel is that?
Hannay 1/2
I've tried and tried to make this work but I just cant get it. Totally bummed. I followed your directions but I am trying to run through a 1/2 proportioner and 1/2 hose. Wondering if that is the problem. I'll have to try later.
What issue are you having? I can almost guarantee that it’s not going to work with 1/2 proportioner. At least not like it does with my setup
TY for responding. I can get it to draw straight from a bucket through the hose reel but once I had the proporitoner I just get nothing. using 1" braided hose from the proportioner and the 1" coming from the engine.
Oh...also have 1" coming to hose reel with a 1/2 reducer to the 1/2 hose.
@@Michaelhenss-f1u 1/2 is too restrictive for a proportioner
@@AdvancedSoftwashLLC TY...Figured that was prolly the problem. Well Got all I need but that so I know what the next money is lol
Anyone run this with 5/8" AG hose? See everyone running with 1/2" hose, wonder if there would be any difference using 5/8" from a true 1" manifold.
This is 5/8 hose. Not sure if the ag hose would make much difference over the flexzilla except when leaving some rolled on the hose reel