How To APPLY Chemical | Soft Washing Vs Pressure Washing
HTML-код
- Опубликовано: 31 май 2024
- SIGN UP FOR MY SIX FIGURE PRESSURE WASHING PROGRAM HERE:
www.sixfigurepressurewashing.com
Downstreamer: amzn.to/4a25jqc
X-Jet: amzn.to/4ajTdZN
GET YOUR WINDOW CLEANING EQUIPMENT HERE:
windowcleaner.com/?sca_ref=49...
MY WEBSITE GURU) GET A LEAD GENERATING MACHINE OF A WEBSITE: Reach Out to Sean Directly HERE: calendly.com/seanhouchins/aus...
GET $1000 OFF AND GET COSTUM SKID/TRAILER LIKE ME HERE:
JOIN US ON FACEBOOK: / 569835660957486
BOOK A 20 MIN COACHING CALL WITH ME ($225) : calendly.com/austindavisadvic...
GET THE BEST CRM FOR YOUR SERVICE BUSINESS HERE:
TRY MARKATE FOR FREE WITH THIS LINK: www.markate.com/?aff=AustinDavis
Hey man, just wanted to thank you for all the tips. Knocked my first job out today, no problems lots of stucco and a sweet check!!
Very well explained video thanks!
Great video with awesome info! Appreciate it man.
Bro! This is the kinda shit we need! Thank you
Very informal and good video
Great & Very informative Video! Thanks Austin. Please keep these and the "Day in the life" vids as well! I love these!
Tanks for the information
Soft Washing v Pressure Washing = Chemical Energy v Mechanical Energy!
Fire video which answered all my questions and made me buy an m5
Great video! I appreciate all that you do for the pressure washing community.
I started last year and have been using an xjet the entire time. I have tried to swap to a downstream injector, but when I tried to connect the down stream injector to my pump, I noticed that the threads were different. I bought a 4gpm GX390 pressure washer with a CAT industrial triplex pump and it came with a downstream injector, but I read that I should not use it. When I took it off, the thread is different and I can't connect my new downstream injector to the pump. I have tried to take the barb off the old downstream injector and plug it and just put the new downstream injector on after it, but I could not find the right plug for it either. What do you recommend that I do? I would really like to start downstreaming.
Dude I saw that barrel tile roof and knew you were in texas. where u at? almost looked like steiner ranch or some rich place like that lol
Hey Austin, what bleach percentage do you prefer for vinyl vs concrete?
Great video, sets me on the road. Can I ask you for the best chemical to put on moss on tarmac and the best technique. I only bought an x Jet yesterday..We in Ireland are covered in moss !! Great opening to make money.
Most of the homes in my area are less that 4000 sqft, what size solution tank would you recommend for a 50/50 6% batch mix? thx really appreciate your channel.
Do you rinse with your 12volt or your pressure washer? I down stream now looking to make the switch to 12volt.
Hello awsome videos very helpful,
I’m locaded in Philadelphia area what do you think in the east cost about the power washing business? A reason I’m asking because of our weather here.
If using a 4gpm unit Xjet says you can get up to a 1.6:1 pull rate. That will cover just about anything.
What softwash hose do you suggest?
awesome video in Australia I can get 36% hypo [sh] if you can get that in usa would you need a soft wash cheers for the video
17:25 exactly what I came for lol. Starting from the bottom of the barrel
Do you have a boom lift?
Hey bud love your videos! Where do i purchase the system for $2,500 you were speaking of 12v system w the blend manfold?
Btw im in Indiana
Midwest Power Wash Equipment great people there
What size pressure washer to downstream with 200 feet of
Hose
Hey Austin, quick question. Isn’t there only certain pressure tips that can pull from a downstream injector? If so what are they. Love your content keep up the hard work.
I would use an M5 twist. You can pull with that nozzle. No one uses Jrods anymore.
@@AustinDavis24 thank you so much❗️
Hey Austin I'm getting started on my journey do I need to batch mix while using an xjet to achieve 4-5-6% or do you recommend straight bleach in a 5 gallon bucket and is it even possible to achieve those % using an xjet
friend if you listen closely to his video you will not be able to achieve that strength with an exjet you a blend manifold good luck
How would you clean a roof that hasn't been cleaned in decades and is completely black and has hundreds of pounds of moss entangled in the roof tiles. How is a bit of bleach going to remove all that moss?
Love your content and I'm trying to start my own pressure washing business.
While watching this video an xjet modification idea popped into my head (not sure if it would work), but what if you configured/installed the xjet at the same place you would put the down stream injector. That way you wouldnt have to carry around a bucket. Would it possibly draw the same ratio? Obviously youd have to throw together some nipples/fittings and quick connects to make this possible. May be worth a shot
It would not be possible to draw the same ratio because one of the reasons your able to get a hot mixture with an Xjet is due to placement. The X-jet is at the gun/wand which means is barley mixing with any water. If you out it at the reel, its going to have 100-250ft of water through your hose line its going to mix with.
Question for you Austin Do you have a recommendation for high level of cold weather climates states to do this business year round or seasonal only let me know what you think....
Most people that are in very cold climates after put away for the winter. Can’t wash when the water is frozen!
Why do you not like the air diaphragm pump
can you soft wash with a pressure washer?
If the x - jet pulls at a 3:1 ratio, using your formula you mentioned for the downstream injector.
12.5 / 3= 4.16
So will the Xjet actually be closer to a 4% mix? I’m still learning all of this. Thanks so much for these videos.
3:1 means divide by 4 ( The number of total parts)
@@meta_man_ I appreciate it thank you
What % do you use for a moderately dirty driveway (no oil stains) just mineral build up & duck poop. Got my first driveway cleaning this Saturday & quoted $350 for the driveway or $1200 for the driveway, Pool deck & back patio .. he scheduled me to test me out for the driveway first. Very nervous i don’t have a surface cleaner but I am looking into getting one from a supply store in southern CA hopefully for less than $1000 which is my budget. Thank you Austin
Hope to hear from you Austin Im about to pick up a Simpsons 3200 psi pressure washer & Simpsons 20” 260 degrees surface cleaner .. hoping that’s enough to get the driveway down
3-4 inches per gpm. Use a 15-inch surface cleaner. Pre treat the driveway with a 60/40 mix water and bleach with a little soap. Clean it, rinse it and spray a little more Chem for your post treatment.
More informative videos needed for newbies. Let’s protect the business and demonstrate the professionalism to clients.
I am starting a pressure washing business this Spring amd I did my parents driveway to practice in the Fall. I noticed after I finished it there were lines from the surface cleaner. I heard I should post treat it. Is that just with Bleach? Also how long should I leave it on before rinsing?
Yes, i had this same problem when i started last summer. I've used just the downstream injector with 10% bleech from walmart, and i let it sit for around like 10 minutes and it worked really well.
Okay, thank you for the help!
In an old video you said you don't use a jrod (for softwash) for a few reasons....so what do you use?
I don’t use a Jrod on my downstream setup. I use a M5-twist. But for my softwash system I use a Jrod.
@@AustinDavis24 Random technical question… Do you downstream while surface cleaning or just pre and post treat?
What nozzle do you use on that for your 12-volt
Jrod
What tips do you recommend for a 5.5 gpm soft wash pump?
For a 12V? I’d just use a J-Rod.
@@AustinDavis24 Right but like what specific sizes?
@@ervinfisher9873 oh! My Jrod doe some reason Dosent say the exact sizes but that only really matters for high pressure. For a softwash system it’s not a big deal. 20025 or 20050 should be fine
@@AustinDavis24 Gotcha. Thanks
Can you get a skid to fit the bed of my Toyota Tacoma?
sure can!
10 to 1 means 1/11 of your mix is SH which is 9.09%. Your mix with 12.5% SH will be 1.1% not 1.25%.
what % do you clean brick pavers at?
Usually about a 3% and then a medium to high-pressure rims
Rinse
@@AustinDavis24 Awesome thank you! I just got a Northern Tool Soft wash system to start off with as my first actual system and I have a brick pavers job this weekend to do. You the man
You can easily build a metering system for a lot less than the one you have.
Is it a one time payment, or monthly?
It’s a scheduled monthly payment but you can go through the program in about a week and cancel your membership if you like. It’s really easy. But people choose to stay in the program because of the constant mentorship on a monthly basis. And all of the one-on-one calls.
I stay in for the community! The Facebook group is great!
🔥🔥🔥
Austin Im starting my business in a couple weeks. Best tip and advice you got in a couple sentences?
Stay persistent. Dont let a couple days of no leads get you down. Keep marketing. Ask your self, how many eye balls saw my business today?
@@AustinDavis24 thanks Austin I appreciate you. Going from BS get rich quick schemes to an actual business model. Super excited to get started.
advertise, advertise, advertise
I was gunna say that is basically 50% of the business tbh.@@SlickRickTPB
How do you keep the 12 volt battery charged?
I charge every other day
@@AustinDavis24 whats the best hose to use for my soft wash system and my pressure washer I want to upgrade to 150
Learned a lot about washing... can i talk to you?
How can i market as a 14yr old, where i can get to close houses easy since i cant drive?
Have an adult drive you to a neighborhood or development, and go door to door. You can start by window washing, $10-20 per window. The equipment can be bought for $100 and you can carry it on you from house to house. They can always come pick you up when you are done and go do whatever they like, or hang around and supervise.
@@jamestribbitt9684 Thanks, i have pressure washing equipment from last summer so i’m looking to continue doing this. Just can’t clean houses only concrete. Hoping to upgrade to a 4pm this or next summer
@@swishd_train4742 how did you get around last summer? If you want to make it work bad enough, you will find a way. Wheel the washer around the neighborhoods. Go where there are side walks and lots of houses.
Hi yes I just subscribe your channel and like Tampa how can I start my business?
why couldn't you just install 2 x jets in series of each others with separate chemical lines which would double your flow
Damn I actually never thought about that😂
Almost all companies here use pump sprayers lol
Omg omg I just subscribed. Gonna rub one out .
Thank you for your videos I’m trying to sell my car to get a truck and some equipment to start up by myself. Gonna check into the class and see if I have funds tomorrow. Again ty