❤😁 Freakin' AWESOME 😁❤️ I love seeing classic old Iron being brought back to working order and its original glory. Great job!! She sounds incredible and looks gorgeous. 👏👏👏👏👏👏👏👏👏
When I was about nine a huge highway project started in our front yard. The hill on the other side of the road became the pit and all the highway gravel was crushed from this source. I'd get up early to watch the D9 Caterpillar start up and work the pit. I can still remember hearing the pony motor start and then the big diesel. After weeks of watching the operator waves me over and took me on a couple passes. What a treat!
Nice job rebuilding the little dozer. Now get the seat back on it and drive it until the tracks are loosened up. Then pull something that will labor the engine very hard to break the engine in property. Love your little dozer.
Incredible! I'm so happy to see this episode! My guess is you two will always have a little tweak that you "need" to do to it. But that's what makes you men you are. Thanks for bringing his along!
Man I’m so happy for you two. It sure does sound good running and moving under its own power. I’m sure you guys will get it all ironed out. It’s been a pleasure watching this project
It's been a long journey and not over yet....but I'm so very happy for you. I'm quite sure your son is smiling down on you and his Grandpa!! God Bless!!!
Tom we're glad you're here with us. You, most of all, know what we're going through. Your comments and support of the channel has been a bright spot on every video. 😊
Sir I have to be honest with you I have joined the party late and have only started watching after the Track soaking video. But I have to tell you I think it is an absolute honour to watch you and your father work on this caterpillar. The relationship you have with your father is something truly wonderful. You have most certainly got my subscription to your amazing channel. I am looking forward to going back through your previous videos working on the caterpillar. Sending love to you and your family from the UK.
Very much appreciated. I'm very lucky to have worked with my father most of my life. For almost 30 years my grandfather my father and I all worked together. My son was always there with us too. It makes me happy that so many appreciate the videos! We are happy you are here with us. 😊
I guess your going to pull the #1 injector ? Fix the leaks and your off and running, the shut off for the gasoline is perfect and most units have them LOOKS 👍🏻👍🏻
I said it when you got the starting engine running, now I'll say it again, CONGRATULATIONS! The D4 lives! Interesting to know that a D4 starting engine runs better on Folgers, I know I do. You are wise to prepare for a run away engine. It happened to me with an RD8. To long of a story to tell here but if it wasn't for the compression release i'd either be picking up pieces or pushing up daisies.
That's a bit scary! I'm going to have to hear that story sometime. I'll say one thing about Folgers. It's the best part of waking up that diesel engine! 😂
Hey Aaron and Greg, yea, "it's alive!" Man, I am so exicitrled for you both. Good job, guys. I need to take my starter pinion clutch out and see what's up with that. I have to hold mine in too. I'm glad my pinion stays engaged and disengages when it should.
I'm a Johnny-Come-Lately to this channel and this saga specifically. I'm sitting on the edge of my seat, waiting to see if the dang thang movang will loosen up the tracks!!
Congratulations guys! Really nice to hear that tractor run. Fine tuning the small problems should be easy. Getting her to run was the hard part and you did it!
So nice, I watched it twice. This great story is moving into its final chapter. Thanks for taking us along. Your editing is award winning, and the extras (outtakes) are always entertaining. Thanks for the laugh.
It's good to see it running. After a few minor tweaks hopefully we will see it out being run in. It would be good seeing it towing a set of discs to settle it down under load. I guess it won't be long before we see a new project coming up.
You can bet we're going to work on more projects. The next major one will be the 5T, five roller frame in the other shop. When we get done with Lefty it's going to drag the one-way disc or a plow. 👍
So happy to see Lil Lefty move! I met you in Longmont at the dougherty tractor show. I have binge watched all the episodes in this series since then. I was the guy in the C&Rsenal shirt on the Sunday. You guys have done such an amazing job. I look forward to seeing this project finished and to see you again at another show.
Thank you! I do definitely remember. You can bet this tractor is going to be at that show next year. Very much appreciate your support of the channel and it was a pleasure meeting you at the show. 👍
I used to work on EMD diesel s this boat had a pair 16-645-E they wore working the fleet putting around it had oily stacks the mechanic s told they were putting in new piston s rings and properly brake it in when there pushing 15 barge s hooked up there is just a haze coming out of the stacks congratulations what a awesome job you and your dad did
Congratulations! I'm a relatively new viewer on this channel but I've been checking out various episodes and I love seeing the old iron come back to life!
Its alive...its alive😂. Yes the monster is back from the dead. How much for the clutch dogs from CAT? It sees a D4 oil pan is the same exact capacity as the Kd35 and later D65 engine. Forgetting to open the valve? Oh that a common thing with me😂😂
Thanks Steve! The dogs are $55 each. It uses 3 of them. Two are still on backorder until late November. It suprised me how much oil it took. If the cooler was still operational I think that would take another 3-4 quarts. 😊
When I refurbished my 5U, I focused on eliminating all the worn out parts, even if they still "sort of" worked, because it was very hard to adjust anything with the motion lost from wear
Only recently found your channel & haven't had the chance to start looking back through your rebuild process. As this is from early August the following would be more for other commenters, ESPECIALLY if you've solved the fueling issue by now. When you had checked #1 did the connection to he injector weep? If it didn't the individual pump probably stuck in the raised position or not enough lift? Injector itself?
Awesome guys 👍 The trouble with finding new, quality RUclips content is finding the time to watch all of the new, quality RUclips content. But sleep and work are overrated anyway So it looks like I'm gonna be here for a while 😁 Mr Aaron you have a highly impressive moustache 👍
Thank you! I tend to agree on the work and sleep, 🤣. We're happy to have you here with us at LAOL. 👍 The mustache is a lot more of a commitment than I bargained for.
20 minutes on a new build and a dead cylinder is not ideal. Wash a cylinder down in short order. That's where your fuel in your exhaust is coming from. Hopefully it's just a hung injector. Could be an IP issue as well.
❤😁 Freakin' AWESOME 😁❤️ I love seeing classic old Iron being brought back to working order and its original glory. Great job!! She sounds incredible and looks gorgeous. 👏👏👏👏👏👏👏👏👏
When I was about nine a huge highway project started in our front yard. The hill on the other side of the road became the pit and all the highway gravel was crushed from this source. I'd get up early to watch the D9 Caterpillar start up and work the pit. I can still remember hearing the pony motor start and then the big diesel. After weeks of watching the operator waves me over and took me on a couple passes. What a treat!
Nice job rebuilding the little dozer. Now get the seat back on it and drive it until the tracks are loosened up. Then pull something that will labor the engine very hard to break the engine in property. Love your little dozer.
Incredible! I'm so happy to see this episode! My guess is you two will always have a little tweak that you "need" to do to it. But that's what makes you men you are. Thanks for bringing his along!
Congrats boys!!! What an awesome accomplishment! Pure joy!💪🏻💪🏻💪🏻
Way to go guys 🎉 another piece of old iron saved !
Right on Guys it’s a milestone no doubt about it few things to tweak but that’s to be expected 😀🇨🇦
Man I’m so happy for you two. It sure does sound good running and moving under its own power. I’m sure you guys will get it all ironed out. It’s been a pleasure watching this project
That D4 is some real beautiful machine! Just the right size , your one lucky guy
Got directed here from squatch’s channel. Keep up the great content!
Thank you. Welcome to LAOL!
Me too. Great channel!
And me, great channel👍🏻👍🏻👍🏻
Don't blame ya for getting emotional, been following a long on yer journey!
Yes, "it moved." 😂 Im so happy for you. Great job.
It's been a long journey and not over yet....but I'm so very happy for you. I'm quite sure your son is smiling down on you and his Grandpa!! God Bless!!!
The long awaited episode!! Congratulations awesome job well done!! Cannot wait to see it move outside….
awesome 2 years of love
In that instance I knew....lol sounds fantastic. You guys are so fun to watch. Oh the success..how sweet.
Just the facts man. 😂
Tom we're glad you're here with us. You, most of all, know what we're going through. Your comments and support of the channel has been a bright spot on every video. 😊
So happy for you two, "she runs"! We all know you'll have her purring like a kitten in no time. Great job.
Love it! Can't wait to see it all tightened up and completed! Great Job guys!!!
It moved! Congratulations guys, all your hard work paid off, thanks so much for taking us along! Bravo!!!
You've been an awesome supporter! We always appreciate your comments. 👍
Sir I have to be honest with you I have joined the party late and have only started watching after the Track soaking video. But I have to tell you I think it is an absolute honour to watch you and your father work on this caterpillar. The relationship you have with your father is something truly wonderful. You have most certainly got my subscription to your amazing channel. I am looking forward to going back through your previous videos working on the caterpillar. Sending love to you and your family from the UK.
Very much appreciated. I'm very lucky to have worked with my father most of my life. For almost 30 years my grandfather my father and I all worked together. My son was always there with us too. It makes me happy that so many appreciate the videos! We are happy you are here with us. 😊
Just amazing. You and your dad deserve this day!!!!!
I guess your going to pull the #1 injector ? Fix the leaks and your off and running, the shut off for the gasoline is perfect and most units have them LOOKS 👍🏻👍🏻
We are most definitely going to be working on the injectors in the near future. 👍
Hang in there buddy! Y’all are doin a great job! ❤
Way to go! You guys are the best!!!
Good work👍👍👍👍. Congratulations.
Greetings from the Czech Republic.
Congrats!! been watching since the very beginning and found myself getting a little emotional as well. Well done.
Nice to see the emotion congratulations.😅
That's big time fun great job
From 1 old Cat mechanic to two other cat mechanics good build brothers
I said it when you got the starting engine running, now I'll say it again, CONGRATULATIONS! The D4 lives! Interesting to know that a D4 starting engine runs better on Folgers, I know I do. You are wise to prepare for a run away engine. It happened to me with an RD8. To long of a story to tell here but if it wasn't for the compression release i'd either be picking up pieces or pushing up daisies.
That's a bit scary! I'm going to have to hear that story sometime. I'll say one thing about Folgers. It's the best part of waking up that diesel engine! 😂
Awesome! What a sight for sore ears.
We've all done the unthinkable.
Those darn shut off valves! 😅
Hey Aaron and Greg, yea, "it's alive!" Man, I am so exicitrled for you both. Good job, guys. I need to take my starter pinion clutch out and see what's up with that. I have to hold mine in too. I'm glad my pinion stays engaged and disengages when it should.
Thanks carbie! 😊 I've talked to a few folks that said that pinion is a needles edge of adjustment. I imagine we can fuss with a little more. 👍
Congratulations Great Job you guys should be Proud!
I'll bet your boy is watching from heaven so proud
Blood, sweat and tears.. so many people will never know the joy of it!
Yeah when she started to move I yelled GO GO GO! (:
I'm a Johnny-Come-Lately to this channel and this saga specifically. I'm sitting on the edge of my seat, waiting to see if the dang thang movang will loosen up the tracks!!
We're definitely going to give it a try!
Congratulations guys! Really nice to hear that tractor run. Fine tuning the small problems should be easy. Getting her to run was the hard part and you did it!
It moved too 🎉🎉🎉
Happy for you guys great job!
Beyond happy for you. Some day I hope to reach this point with Grandpa's machine.
I'm sure you will! One thing I've learned with this is that big or small progress is progress. 👍
Wow what a endeavor,
Awesome!!!
So nice, I watched it twice. This great story is moving into its final chapter. Thanks for taking us along.
Your editing is award winning, and the extras (outtakes) are always entertaining. Thanks for the laugh.
It makes my day to know that everything is appreciated. I tried very hard to keep it light-hearted and fun. 😊
I dont know about the rest of you, but I cheered when it started.
100% 🥳
Great job great videos .....
It's good to see it running. After a few minor tweaks hopefully we will see it out being run in. It would be good seeing it towing a set of discs to settle it down under load. I guess it won't be long before we see a new project coming up.
You can bet we're going to work on more projects. The next major one will be the 5T, five roller frame in the other shop. When we get done with Lefty it's going to drag the one-way disc or a plow. 👍
Thanks!
Thank you for supporting the channel!
I know how it feels, to get a long term project running for the first time - such relief and joy. Well done. :)
It really is!
Great job Aaron and dad 👍🏾
And thanks again for helping me figure out my uncle's year of his 1951 D6
Anytime! Glad I could help. We really appreciate the views and comments. 😊
Good job. I have been following for about a year and a half ,I enjoyed seeing it fire up.
Thank you, I remember when we met at Rollag. 😊
What a feeling to see it all start to run! Love those 90 degree shutoff valves - they shut off when you turn them off.
I was just making sure they work, 😂.
So happy to see Lil Lefty move! I met you in Longmont at the dougherty tractor show. I have binge watched all the episodes in this series since then. I was the guy in the C&Rsenal shirt on the Sunday. You guys have done such an amazing job. I look forward to seeing this project finished and to see you again at another show.
Thank you! I do definitely remember. You can bet this tractor is going to be at that show next year. Very much appreciate your support of the channel and it was a pleasure meeting you at the show. 👍
Well done boys.
I'm wondering why I never found this channel sooner... subscribed!
That D4 is awesome!
Happy to have you here with us! 😊
Thanks so much for sharing your joy. The emotion just pours off the screen.
Beautiful...just a few tweeks to go. Congrats guys
Been here from the start. Well done, men!
Yes you have and I appreciate it very much! Very glad you're here with us. 😊
Most excellent. Proud moment.
Excellent job 👍 ..,...!!!
Very cool! Remember the sounds from my Dad’s old D4. Used it to pack silage in Alliance, Nebraska.
That's not too far from here. Just south of some family we have in Chadron. 👍
It’s ALIVE!
I used to work on EMD diesel s this boat had a pair 16-645-E they wore working the fleet putting around it had oily stacks the mechanic s told they were putting in new piston s rings and properly brake it in when there pushing 15 barge s hooked up there is just a haze coming out of the stacks congratulations what a awesome job you and your dad did
Hi My Dear Friend Very Very Great Job Sir ❤❤❤❤❤
Congratulations! I'm a relatively new viewer on this channel but I've been checking out various episodes and I love seeing the old iron come back to life!
Welcome to the channel! Very glad you're here. 😊
Only just found your channel and really enjoying the videos. Best Wishes from Emerald Queensland Australia 🇦🇺
Welcome to the channel! We're very happy you're here with us. 😊
congratulations fellows for a well done job by fabulous gentle men
Thank you! 😊
Totally awesome you two! Congrats, congrats, congrats!!
Thanks so much!!
Great job and it has been a fun 2 years.
I'm guessing these guys like this too much to stop here. I'm betting there will be more fun from these guys
I’m with ya all the way.
A round for everyone, 😉. 🍺 🍺 🍺
New viewer and enjoying it. Keep up the goof ball attitude. Good work. Cheers n beers.
Welcome, we are happy to have you here with us. 🤪
Fanstastic!!! =D That thing sounds like a beast, you'll have it in tip top shape in no time!
Nice work
Two thumbs up and five stars !
Well done fellas!!! Your boy is proud!!!!❤️
Yeah 👍👍👍
Its alive...its alive😂. Yes the monster is back from the dead. How much for the clutch dogs from CAT? It sees a D4 oil pan is the same exact capacity as the Kd35 and later D65 engine. Forgetting to open the valve? Oh that a common thing with me😂😂
Thanks Steve! The dogs are $55 each. It uses 3 of them. Two are still on backorder until late November. It suprised me how much oil it took. If the cooler was still operational I think that would take another 3-4 quarts. 😊
You have done well, now finish my dozer
Great job and congratulations guys, that D4 is a beautiful tractor.
When I refurbished my 5U, I focused on eliminating all the worn out parts, even if they still "sort of" worked, because it was very hard to adjust anything with the motion lost from wear
Love it! Congratulations ❤
I think you know who we have to thank for a big part of this! 😉 🤝
Awesome work!!
just awesome guys
👍👍
Really awesome guys, so pleased for you and for Lil Leftie
Thank you! It was a great day. 😊
Congratulations!! Great video.
Only recently found your channel & haven't had the chance to start looking back through your rebuild process. As this is from early August the following would be more for other commenters, ESPECIALLY if you've solved the fueling issue by now. When you had checked #1 did the connection to he injector weep? If it didn't the individual pump probably stuck in the raised position or not enough lift? Injector itself?
It did weep and we will do an injector test in the future. 👍
Very Nice......................................................
💥Hurray!💥
👏👏👏👏👏
❤
Strong work lads
There were a couple Squatch253 phrases sprinkled in there, "cautiously optimistic"...lol...i know Squatch is watching
Awesome guys 👍
The trouble with finding new, quality RUclips content is finding the time to watch all of the new, quality RUclips content.
But sleep and work are overrated anyway
So it looks like I'm gonna be here for a while 😁
Mr Aaron you have a highly impressive moustache 👍
Thank you! I tend to agree on the work and sleep, 🤣. We're happy to have you here with us at LAOL. 👍 The mustache is a lot more of a commitment than I bargained for.
nice good
Just make sure the pony motor oil does not have gas in it, you'll do the main pony crankshaft bearing!
Nice Vid! 😂
Well done, well done.....😂
20 minutes on a new build and a dead cylinder is not ideal. Wash a cylinder down in short order. That's where your fuel in your exhaust is coming from. Hopefully it's just a hung injector. Could be an IP issue as well.
Good deal.
I'm an emotional guy myself...I get it...
👍😎💯🇺🇲
😊