Hi Jonas, just want to say thank you always love your setup. I did referred back to your M1 setup and was able to set my timer exactly how you setup yours and also activated the stabilization mode as well. It is actually pretty much how I did my M2, all except for the stabilization which I assigned a wrong switch at first but now it’s all taking care of. Thanks again.
thank you Jonas for all your detailed information. it helped me understand the fundamentals of your setup. AccuRC is absolutely amazing. I purchased a license after watching all your videos. it has improved my flying skills significantly. thank you for sharing the knowledge.
Hey Jonas, just wanted to say thanks so much for this. Im new to the Heli scene and by you sharing this file it has helped me out Tremendously!!! The rescue feature is awesome and works really well! Keep up the amazing work that you are doing!!!
Hi Jonas, first time yesterday when I was inverted and for some reason lost it for a second and thanks to the rescue setup I was able to save it! Works like a charm! Love it, now I know it works 😂 Even someone I fly with and I setup his M2 like mine and he tested out while he was inverted and it did what is supposed to do, flip up right and then climb until the switch was released. Very 😎 Thank you so much!
@@Johnny31297 Yes and thank you so much for those informative videos. Came across this Bluetooth dongle that will work with Tx16s, gonna buy AccuRc hopefully this wknd. Regards from Cali.
Thanks for providing this video and setup file, it is very helpful for OpenTX newbies like me! The rescue feature you added in is cool. Also, thanks for the introduction to the AccuRC simulator. For helicopter radio setup it is WAY easier to use over Real Flight, and has a bunch of cool helicopter models included! I hope you will keep adding more helicopters. :)
Thanks for making this video and sharing your settings. It's very helpful to see the differences between my own settings and an experienced pilot. I've got tail gyro on 6 but it was also ok on 5 everything else on 4. Will probably take aileron agility down to 3, to balance it against my ele setting, after seeing your settings
Such helpful videos Love your style, I have a question for all comers; I am flying a14-year-old KDS 450 Heli, no flight controller just a basic Gyro, still flies great, however, I can't bind the KDS K-8X receiver to My TX16s mk1 running OpenTX 4n1, Suggestions on a good easy to bind receiver Please. Cheers Simon New Zealand
Hey Jonas. I'm about to move over to the TX16s and you mentioned moving the end points to 125%. Which screen is it that you do that on please? Just to be sure Thanks. Love the informative easy follow along 👍
Hi thank you so much for this video it’s help me a lot. I have changed my radio so I don’t have the dead band around centre stick for the head but my question is dose the tail have the same dead band I. The flight controller?
Yepp you're right, that's another option. The advantage of using the 6 pos buttons is reproducibility though- if you click the same button, it will result in the same headspeed every time. With a dial, you'll have to remember values and check the channel monitor each time you want a specific headspeed.
@@Johnny31297 Yes, I tried it both ways. Just wanted to point out that the dials are an option, too. Now I use a Tango 2, so I'm back to three flight modes, lol.
@@navigator2011 Same, but 6. On the Tango I programmed one of the shoulder buttons to drop the throttle percentage a certain amount, so it's 3+3 flight modes essentially
Hi Jonas - on your OMP protocol M1, you’re stuck with the built in pitch and throttle curves, correct or no? I’d like to have battery telemetry with an M1 using the TX16s Mark II, which means I have to get it OMP protocol right? If that’s the case and you’re using the built in curves, please advise if the built in curves are ok - mostly a slow and easy sport flyer. Plz lmk as soon as you can as I’m about to purchase. Thanks!
Hi Jonas, thanks for the video and the setup file. I use a Graupner receiver on the SBUS port. Everything works well, except failsafe. Failsafe is configured in the receiver, and it switches to failsafe (failsafe bit is set and channel values are set to failsafe values on sbus) when I switch off the transmitter. But, my OMP M2 just holds the last values. Do you have the same issue, with your sbus receiver?
Thank you very much for this great video. This helps me a lot. I hope there will be many more videos of yours to follow 😉 Just a short question. In which menu, Spektrum users have to set the cheannel limits to 125%? In the inputs menu?
Dear Jonas, thank you very much for this video. Your explanations are really masterclass. I've downloaded your setup files, but they're OpenTX. On my Radiomaster I'm running EdgeTX. I'm quite new to this hobby, so my question is: Can I import and use your OpenTX-file to my EdgeTx-running Radiomaster or do I need to convert it first? If both options don't work, could you please share your setup files in EdgeTX-format? Thank you very much and have a nice day. Best regards, Markus.
You can just download his m2 evo setup which is almost identical to this one and adjust everything to your liking. It's in the description of the m2 evo review
Jonas, I recently used your setup and worked great using the sbus receiver connected to controller. I recently updated my RM 16s firmware to use the OMP receiver builtin to the controller. I wanted to take advantage of the telemetry function. Once it was bound, the collective was no longer linear with the throttle stick, it will suddenly jump to a high position in all flight modes. Have you seen this before? I have two M2's and both do this.
Bonjour, est-il possible de changer les valeurs de chaque boutons sur l’interrupteur 6 positions ? Je ne trouve pas comment faire dans la programmation ;( Merci
Jonas, what is the range you're getting with the Futaba external RX on the TX16S? I did a range test on a DSM RX I installed and it was hardly 85m. Is that normal?
Hey Jonas! Thanks for this video! Do you know if there is some program limitation for negative collective pitch in normal mode on M2? I am unable to make my CP go negative in normal mode with M2 Explore an Radiomaster TX16S in an attempt to have symmetrical CP settings in all modes to avoid jumps/drops. No matter what I set in curves - the CP drops just a tad below 0 and stays. No problems with positive in normal mode and anything in idle up 1 and 2.
Hi Jonas, thanks for the excellent M2 setup video. I have a question regarding gain, I have used your settings but I can not go above 20% without an up and down osilation, I have tried lowering both elevator and aileron gain to 2 but I still see it, I also checked the main blades for balance.
Hiya. So I really need some help. I'm using edgetx and can get it all on but I'm using spektrum and the channels aren't correct. I was going to swap them but then it messes with loads of linked settings. How do I get it to import or see channel 1 as throttle etc
Did I break my telemetry, or is it only functional with the OMP protocol? I have a spektrum and micro futaba on hand. I am thrilled to try the deadband fix since I couldn't do that with a DX8. This is a fantastic reference guide and so useful as there isn't customer service, in my experience, in talking to OMP. Much thanks Jonas.
Thanks for the great videos. Why not just program your timer on your collective at zero throttle, Normal mode? No hassles or extra switches to worry about.
Im referring to collective 'stick' as throttle. Do you mean because you are not using a normal mode to lower your stick to 0 throttle? In Normal mode my throttle 'stick' at 0 stops the timer. I use clear to reset.
Does the SB switch need flipped as well like on my M1 using the DSMX receiver. I am not sure if you remember because of me using the DSMX receiver and not the SFHSS.
Hallo Master 3d.... Video tutorial yang sangat bagus dan jelas untuk sfhss protocol. Sedikit bertanya bisakah anda membuat video seperti ini untuk internal protocol (ofs) omphobby? Jawabannya pasti anda bisa karena anda seorang Master 3d ..... Terimakasih.....
Hi Jonas, Ive watched with interest your & BuddyRC's videos. Im using AccurRC to train on and have flown the M1 slowly around the garden. I saw that you kindly shared the TX16s setup file. I have a Tango2, is there any way I can use the 'rescue part' only from this file? Gruesse
Hey Trevor, I made a video with BuddyRC detailing how to program the rescue setup in OpenTX, which also applies to FreedomTX. That should help you out! m.ruclips.net/video/lrYBTyRYkzM/видео.html
Hello Jonas, thanks a lot for the rescue video on BuddyRC and also on for this video. Question, your setup change the servo positions quite "hard". Normaly opentx could do a ramp up of the new servo position in a given time. My understanding is that it is not doing it because we are running 2 operations on the same mixer in the same time. I changed also that I have a fixed time if 1,2sec instead of holding the switch. This is a more safe version for a less good pilote in my opinion. Do you gave an idea how to bring in the pitch after the helicopter has turned less hard? maybe to bring the pitch in with 0,1sec? Knowing how to do it, it would maybe also be possible to reduce the pitch after a limited time again so that helicopter does not continue climbing. And if this pitch function ends not as replacement it should also be possible to make a transfer time to get back to the pitch possition on the transmitter, so that different pitch possitions come back less hard when time is finished. I hope you an follow me and I hope you have an idea. By the way, why do you not upload the video from BuddyRC to your side in addtion? Kind regards from Munich, Timo
Hallo Timo, ich schreibe dir, weil ich auch in München wohne und mir auch die Videos von Jonas angeschaut habe. Bei mir bestehen noch einige Unklarheiten und ich habe dieses Video auch schon kommentiert und gefragt, aber keine Antwort erhalten. Wollen wir beide uns zu diesem Thema mal austauschen? LG Markus, aus München.
Hallo Markus, man könnte die Übergänge sicherlich etwas weicher gestelten. Muss man aber bei dem kleinen Heli nicht. Das kann alles so bleiben wie von Jonas empfohlen. Funktioniert einwandfrei. Weitere Fragen? Am besten im "RC Heli Forum" anmelden und ein Post schreiben. VG @@markuslang6695
Hallo Markus, man könnte die Übergänge sicherlich etwas weicher gestelten. Muss man aber bei dem kleinen Heli nicht. Das kann alles so bleiben wie von Jonas empfohlen. Funktioniert einwandfrei. Weitere Fragen? Am besten im "RC Heli Forum" anmelden und ein Post schreiben. VG
Hello , I was referred to you video by Helidirect , my OMP M1 is not holding zero degrees at mid stick and the swash plate will not hold level . I'm getting 18.5 ° positive and 10.2 ° negative maybe even less . I have gone through all the settings on the flight controller , and cannot seem to get it correct ? I'm even using a digital pitch gauge , I have 0.1° on one side of the heli and the other side is giving me a reading of -6.2° . This is driving me crazy I'm thinking something is wrong with the heli or the electronics. I might be able to get it if there were adjustable linkages , as you know they do not exist dor the M1 .
Forget the digital gauge, adjust the swash so that it's level and the blades are in line, then adjust collective endpoints by tip distance. A digital gauge is way overkill for such a small heli.
Hi Jonas - just curious about the aileron agility setting at 4 vs stock value of 5. With the lower value being less feed-forward, does that reduce the aileron flip rate?
Hi Jonas, maybe you can help with my M2's. My old M2 has a FHSS Sat Rx and I use your TX16S setup... it works great. Got a new M2 and am using a Kensun DSMX Rx. I noticed the Kensun M2 seemed to be flying in Safe mode. I check it out and it was flying in safe mode with same setup as my other M2. So it seems that the new Kensun Rx has reversed the SB (Safe mode) switch. Is this possible or do I have another problem?
@@Johnny31297 Thanks... I guess I missed that part. I feel better now, but also stupid too! :) I guess you say to set limits to +/- 125 in the Mixes channel 5?
Question, will this work if you use the OMP protocol? Right now I'm using the setup from BuddyRC for the TX16S with EdgeTX and I saw that you had different setups depending if you were using Spektrum vs SFHSS and I figured it would be different for the OMP setup as well.
hey jonas, thanks for the setup! which channels do i have to change to 125% for DSMX usage? only aileron, elevator and yaw right? so set these channels to -125 to +125 ?
@grimesric I think he means you have to set -100 to -125 and +100 to +125 but would be good to know which channels but I am guessing it is the ones you have listed also yaw left
Using OpenTX Companion to add the M2 setup, then lo and behold, all my models vanished (radio.bin and models.txt got overwritten instead of updated, backup, backup and backup!)
@@Johnny31297 Topman, thanks. Btw, it's good to see you make daft mistakes as well when you messed up your FBL. Makes me feel a bit better about the thoughtless stuff I do 🤣👌
I have the DX6. Im switching over to the 16s max. With the DX6, I have a dead band on the pitch at center stick with the M2, not the cyclic. It doesnt want to catch itself after flips, and it drops out. Does your dead band mod also fix this, or only the cyclic? Do you have a link that describes in detail how you do this dead band mod? Is it in the outputs and you assign it 'all' inputs?
Hello sir jonas since you're using satellite receiver and spektrum. Is this set up also work to omp firmware. So im using stock receiver of omp m2 and bind directly to my tx16s. Is this will still work on my m2?
@@Johnny31297 how about the mini m2 satellite receiver sir? If i buy mini satellite receiver then download your file to my tx. I will just need to bind it and fly?
@@Johnny31297 doesn’t the omp protocol just refer to the data transmission method? My understanding is that the built-in curves on the board are still used even with using a sat receiver. Can you clarify? Plz let me know I’m planning to purchase soon. Thanks!
Love the design but way too small!, scale it up, so I can see it when in the air! Use to fly Flybar Nitro in the 80's. these are great Helis, but way too small to fly unless your in a restricted site!
Warum sollte ich? Englisch war 2023 die meistgesprochene Sprache der Welt mit 1.5 Milliarden Menschen, Deutsch dagegen auf Platz 12 mit 133 Millionen (www.ethnologue.com/insights/ethnologue200/). Dazwischen liegt ein Faktor von über 11. Ich bin zwar beider Sprachen mächtig, allerdings kostet die Produktion eines solchen Videos sehr viel Zeit (und das geht auf meine Freizeit, ich bekomme dafür nichts, ich monetarisiere meine Videos nicht einmal), weshalb ich die Sprache wähle, mit der ich auch die meisten Menschen erreiche, um den Nutzen und die Reichweite meiner Videos zu maximieren. RUclips hat eine fantastische Funktion, die automatisch generierte und übersetzte Untertitel für sehr viele Sprachen einblenden kann, inklusive Deutsch. Ich kann jedem, der des Englischen nicht mächtig ist, nur empfehlen, diese Funktion zu nutzen.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
Soooo good....Thank you for taking the time to share this. Extremely helpful and informative for me, and your rescue setup is awesome.😎👍
Hi Jonas, just want to say thank you always love your setup. I did referred back to your M1 setup and was able to set my timer exactly how you setup yours and also activated the stabilization mode as well. It is actually pretty much how I did my M2, all except for the stabilization which I assigned a wrong switch at first but now it’s all taking care of. Thanks again.
thank you Jonas for all your detailed information. it helped me understand the fundamentals of your setup. AccuRC is absolutely amazing. I purchased a license after watching all your videos. it has improved my flying skills significantly. thank you for sharing the knowledge.
Thanks, I have been using your m1 setup for both my m1 and m2 helis. It is very good and it tought me a lot about open tx programming
Hey Jonas, just wanted to say thanks so much for this. Im new to the Heli scene and by you sharing this file it has helped me out Tremendously!!! The rescue feature is awesome and works really well! Keep up the amazing work that you are doing!!!
Thank you Antonio, welcome to this wonderful hobby! Glad I could help!
Hi Jonas, first time yesterday when I was inverted and for some reason lost it for a second and thanks to the rescue setup I was able to save it! Works like a charm! Love it, now I know it works 😂 Even someone I fly with and I setup his M2 like mine and he tested out while he was inverted and it did what is supposed to do, flip up right and then climb until the switch was released. Very 😎 Thank you so much!
Awesome, that's great news! Happy to hear that my implementation could save you some time and money.
@@Johnny31297 Yes and thank you so much for those informative videos. Came across this Bluetooth dongle that will work with Tx16s, gonna buy AccuRc hopefully this wknd. Regards from Cali.
Van I use the Setup file for Zorro ?
Thanks for making the video and sharing the OpenTX Setup files.
Thanks for providing this video and setup file, it is very helpful for OpenTX newbies like me! The rescue feature you added in is cool. Also, thanks for the introduction to the AccuRC simulator. For helicopter radio setup it is WAY easier to use over Real Flight, and has a bunch of cool helicopter models included! I hope you will keep adding more helicopters. :)
Thanks for making this video and sharing your settings. It's very helpful to see the differences between my own settings and an experienced pilot. I've got tail gyro on 6 but it was also ok on 5 everything else on 4. Will probably take aileron agility down to 3, to balance it against my ele setting, after seeing your settings
Amazing thank you. 🙏🏼 🎉
Okay, but how do you actually set the deadband elimination curve. You have not sufficiently explained that. I really wanna know.
Such helpful videos Love your style, I have a question for all comers; I am flying a14-year-old KDS 450 Heli, no flight controller just a basic Gyro, still flies great, however, I can't bind the KDS K-8X receiver to My TX16s mk1 running OpenTX 4n1, Suggestions on a good easy to bind receiver Please. Cheers Simon New Zealand
Hey Jonas.
I'm about to move over to the TX16s and you mentioned moving the end points to 125%. Which screen is it that you do that on please? Just to be sure
Thanks. Love the informative easy follow along 👍
Hi thank you so much for this video it’s help me a lot. I have changed my radio so I don’t have the dead band around centre stick for the head but my question is dose the tail have the same dead band I. The flight controller?
Great!! Hi Jonas, can you share your setup for this M2 for EdgeTX.
Thank you very much.
Hey, Jonas, great video! You probably know this, but you can alternatively setup an RPM "spectrum" by programming your S1 and S2 dials.
Yepp you're right, that's another option. The advantage of using the 6 pos buttons is reproducibility though- if you click the same button, it will result in the same headspeed every time. With a dial, you'll have to remember values and check the channel monitor each time you want a specific headspeed.
@@Johnny31297 Yes, I tried it both ways. Just wanted to point out that the dials are an option, too. Now I use a Tango 2, so I'm back to three flight modes, lol.
@@navigator2011 Same, but 6. On the Tango I programmed one of the shoulder buttons to drop the throttle percentage a certain amount, so it's 3+3 flight modes essentially
@@Johnny31297 I love how versatile OpenTX is!!!
Jonas, is the file also working for edge tx? Thank you for the great info!
Hi Jonas - on your OMP protocol M1, you’re stuck with the built in pitch and throttle curves, correct or no? I’d like to have battery telemetry with an M1 using the TX16s Mark II, which means I have to get it OMP protocol right? If that’s the case and you’re using the built in curves, please advise if the built in curves are ok - mostly a slow and easy sport flyer. Plz lmk as soon as you can as I’m about to purchase. Thanks!
Hi Jonas, thanks for the video and the setup file. I use a Graupner receiver on the SBUS port. Everything works well, except failsafe. Failsafe is configured in the receiver, and it switches to failsafe (failsafe bit is set and channel values are set to failsafe values on sbus) when I switch off the transmitter. But, my OMP M2 just holds the last values. Do you have the same issue, with your sbus receiver?
Thank you very much for this great video. This helps me a lot. I hope there will be many more videos of yours to follow 😉
Just a short question. In which menu, Spektrum users have to set the cheannel limits to 125%? In the inputs menu?
Dear Jonas, thank you very much for this video. Your explanations are really masterclass. I've downloaded your setup files, but they're OpenTX. On my Radiomaster I'm running EdgeTX. I'm quite new to this hobby, so my question is: Can I import and use your OpenTX-file to my EdgeTx-running Radiomaster or do I need to convert it first? If both options don't work, could you please share your setup files in EdgeTX-format? Thank you very much and have a nice day. Best regards, Markus.
You can just download his m2 evo setup which is almost identical to this one and adjust everything to your liking. It's in the description of the m2 evo review
@@raihanmiah7162: Got it, works great. Thanks for this advice.
Jonas, I recently used your setup and worked great using the sbus receiver connected to controller. I recently updated my RM 16s firmware to use the OMP receiver builtin to the controller. I wanted to take advantage of the telemetry function. Once it was bound, the collective was no longer linear with the throttle stick, it will suddenly jump to a high position in all flight modes. Have you seen this before? I have two M2's and both do this.
Hi Jonas, can you tell me what you use to hang up your heli's. I see them hanging in the background.
Bonjour, est-il possible de changer les valeurs de chaque boutons sur l’interrupteur 6 positions ? Je ne trouve pas comment faire dans la programmation ;( Merci
Jonas, what is the range you're getting with the Futaba external RX on the TX16S? I did a range test on a DSM RX I installed and it was hardly 85m. Is that normal?
can u explain how to set deadband. i do not know how to set it like u did
Hey Jonas! Thanks for this video! Do you know if there is some program limitation for negative collective pitch in normal mode on M2? I am unable to make my CP go negative in normal mode with M2 Explore an Radiomaster TX16S in an attempt to have symmetrical CP settings in all modes to avoid jumps/drops. No matter what I set in curves - the CP drops just a tad below 0 and stays. No problems with positive in normal mode and anything in idle up 1 and 2.
Hi Jonas, thanks for the excellent M2 setup video.
I have a question regarding gain, I have used your settings but I can not go above 20% without an up and down osilation, I have tried lowering both elevator and aileron gain to 2 but I still see it, I also checked the main blades for balance.
Hiya. So I really need some help.
I'm using edgetx and can get it all on but I'm using spektrum and the channels aren't correct. I was going to swap them but then it messes with loads of linked settings.
How do I get it to import or see channel 1 as throttle etc
Did I break my telemetry, or is it only functional with the OMP protocol? I have a spektrum and micro futaba on hand. I am thrilled to try the deadband fix since I couldn't do that with a DX8. This is a fantastic reference guide and so useful as there isn't customer service, in my experience, in talking to OMP. Much thanks Jonas.
Very good nice 👍
Thanks for the great videos. Why not just program your timer on your collective at zero throttle, Normal mode? No hassles or extra switches to worry about.
Because there is no throttle stick on collective pitch 3D helicopters 👍
Im referring to collective 'stick' as throttle. Do you mean because you are not using a normal mode to lower your stick to 0 throttle? In Normal mode my throttle 'stick' at 0 stops the timer. I use clear to reset.
Can I used the setup file for Zorro ?
Does the SB switch need flipped as well like on my M1 using the DSMX receiver. I am not sure if you remember because of me using the DSMX receiver and not the SFHSS.
Hallo Master 3d....
Video tutorial yang sangat bagus dan jelas untuk sfhss protocol.
Sedikit bertanya bisakah anda membuat video seperti ini untuk internal protocol (ofs) omphobby? Jawabannya pasti anda bisa karena anda seorang Master 3d ..... Terimakasih.....
downloaded the model file but does not have rescue ...
Hi Jonas, Ive watched with interest your & BuddyRC's videos. Im using AccurRC to train on and have flown the M1 slowly around the garden. I saw that you kindly shared the TX16s setup file. I have a Tango2, is there any way I can use the 'rescue part' only from this file? Gruesse
Hey Trevor, I made a video with BuddyRC detailing how to program the rescue setup in OpenTX, which also applies to FreedomTX. That should help you out! m.ruclips.net/video/lrYBTyRYkzM/видео.html
@@Johnny31297 Dass ist ya geile, veilen danke !
OMPHobby Retailers
Europe: www.scotiarc.co.uk/
North America: www.buddyrc.com?ref=abnldyy2io
RUclips Channels
Jonas: ruclips.net/user/Johnny31297
BuddyRC: ruclips.net/user/BuddyRC
OpenTX Setup File: drive.google.com/file/d/1LxbOBxb0R7BcL5G5Pojn_Xk_hQNUF8Y6/view?usp=sharing
SkyRaccoon Model Images
M2 V2: www.skyraccoon.com/aircraft/OMP-Hobby_M2-V2_M2V2O
M2 Explore: www.skyraccoon.com/aircraft/OMP-Hobby_M2-Explore_M2EXP-OR
Will this work with Edge TX. I Seem to be having issues.
Hello Jonas, thanks a lot for the rescue video on BuddyRC and also on for this video. Question, your setup change the servo positions quite "hard". Normaly opentx could do a ramp up of the new servo position in a given time. My understanding is that it is not doing it because we are running 2 operations on the same mixer in the same time. I changed also that I have a fixed time if 1,2sec instead of holding the switch. This is a more safe version for a less good pilote in my opinion. Do you gave an idea how to bring in the pitch after the helicopter has turned less hard? maybe to bring the pitch in with 0,1sec? Knowing how to do it, it would maybe also be possible to reduce the pitch after a limited time again so that helicopter does not continue climbing. And if this pitch function ends not as replacement it should also be possible to make a transfer time to get back to the pitch possition on the transmitter, so that different pitch possitions come back less hard when time is finished. I hope you an follow me and I hope you have an idea.
By the way, why do you not upload the video from BuddyRC to your side in addtion?
Kind regards from Munich, Timo
Hallo Timo, ich schreibe dir, weil ich auch in München wohne und mir auch die Videos von Jonas angeschaut habe. Bei mir bestehen noch einige Unklarheiten und ich habe dieses Video auch schon kommentiert und gefragt, aber keine Antwort erhalten. Wollen wir beide uns zu diesem Thema mal austauschen? LG Markus, aus München.
Hallo Markus, man könnte die Übergänge sicherlich etwas weicher gestelten. Muss man aber bei dem kleinen Heli nicht. Das kann alles so bleiben wie von Jonas empfohlen. Funktioniert einwandfrei. Weitere Fragen? Am besten im "RC Heli Forum" anmelden und ein Post schreiben. VG @@markuslang6695
Hallo Markus, man könnte die Übergänge sicherlich etwas weicher gestelten. Muss man aber bei dem kleinen Heli nicht. Das kann alles so bleiben wie von Jonas empfohlen. Funktioniert einwandfrei. Weitere Fragen? Am besten im "RC Heli Forum" anmelden und ein Post schreiben. VG
Thanks for the great video. I need to reverse the direction of a switch, but I can't! in which menu should you do? thank you so much
You can change the direction by changing the logical operation in the logical switches menu 👍
@@Johnny31297 Thank you. it was so simple 👌
Hello , I was referred to you video by Helidirect , my OMP M1 is not holding zero degrees at mid stick and the swash plate will not hold level . I'm getting 18.5 ° positive and 10.2 ° negative maybe even less . I have gone through all the settings on the flight controller , and cannot seem to get it correct ? I'm even using a digital pitch gauge , I have 0.1° on one side of the heli and the other side is giving me a reading of -6.2° . This is driving me crazy I'm thinking something is wrong with the heli or the electronics. I might be able to get it if there were adjustable linkages , as you know they do not exist dor the M1 .
Forget the digital gauge, adjust the swash so that it's level and the blades are in line, then adjust collective endpoints by tip distance. A digital gauge is way overkill for such a small heli.
Hi Jonas - just curious about the aileron agility setting at 4 vs stock value of 5. With the lower value being less feed-forward, does that reduce the aileron flip rate?
No, just the initial response to control inputs, the rotation rate is controlled by the Speed setting 👍
0:32 poor cameraman 😂😂
Hi Jonas, maybe you can help with my M2's. My old M2 has a FHSS Sat Rx and I use your TX16S setup... it works great. Got a new M2 and am using a Kensun DSMX Rx. I noticed the Kensun M2 seemed to be flying in Safe mode. I check it out and it was flying in safe mode with same setup as my other M2. So it seems that the new Kensun Rx has reversed the SB (Safe mode) switch. Is this possible or do I have another problem?
Yes, as mentioned at 3:09
@@Johnny31297 Thanks... I guess I missed that part. I feel better now, but also stupid too! :) I guess you say to set limits to +/- 125 in the Mixes channel 5?
Anyone ever play around with slow head speed on FHSS? I would like to see a setup.
Question, will this work if you use the OMP protocol? Right now I'm using the setup from BuddyRC for the TX16S with EdgeTX and I saw that you had different setups depending if you were using Spektrum vs SFHSS and I figured it would be different for the OMP setup as well.
omp protocol is not
hey jonas, thanks for the setup! which channels do i have to change to 125% for DSMX usage? only aileron, elevator and yaw right? so set these channels to -125 to +125 ?
@jonas I would love to know this also. Can this setup also apply to the M1?
@grimesric I think he means you have to set -100 to -125 and +100 to +125 but would be good to know which channels but I am guessing it is the ones you have listed also yaw left
Not throttle as well?
Using OpenTX Companion to add the M2 setup, then lo and behold, all my models vanished (radio.bin and models.txt got overwritten instead of updated, backup, backup and backup!)
What parameter differences are there if I want to use the flight controller's OMP protocol directly with my TX-16S ?
Honestly no idea, I never bothered using the OMP protocol as it's very limited in its capabilities
Thanks Jonas 👍
If I just wanted the custom curve, how do I get it from your model into my model?
My pleasure! You can open my model in OTX companion, take a look at the curve you want and then just program it in your own model file.
@@Johnny31297 Topman, thanks. Btw, it's good to see you make daft mistakes as well when you messed up your FBL. Makes me feel a bit better about the thoughtless stuff I do 🤣👌
@@markrice23 Eh, it's all good as long as you catch it before you fly again 😂
@@Johnny31297 absolutely 😅😅😅
I have the DX6. Im switching over to the 16s max. With the DX6, I have a dead band on the pitch at center stick with the M2, not the cyclic. It doesnt want to catch itself after flips, and it drops out. Does your dead band mod also fix this, or only the cyclic? Do you have a link that describes in detail how you do this dead band mod? Is it in the outputs and you assign it 'all' inputs?
There is no deadband on collective, only on cyclic. You‘ll need to correct for this manually.
@@Johnny31297 Ok thanks! Ill re-check my pitch curves. I appreciate the help.
Hallo Jonas. Gibts deine Videos auch auf deutsch?
Leider nicht, das wäre zu viel Aufwand zum Produzieren. Du kannst aber automatisch übersetzte Untertitel einblenden lassen 👍
Hello sir jonas since you're using satellite receiver and spektrum. Is this set up also work to omp firmware. So im using stock receiver of omp m2 and bind directly to my tx16s. Is this will still work on my m2?
It’s not, the OMP protocol is very limited in its ability to adjust throttle and collective. I‘d always recommend an external receiver. 👍
@@Johnny31297 how about the mini m2 satellite receiver sir? If i buy mini satellite receiver then download your file to my tx. I will just need to bind it and fly?
@@Johnny31297 doesn’t the omp protocol just refer to the data transmission method? My understanding is that the built-in curves on the board are still used even with using a sat receiver. Can you clarify? Plz let me know I’m planning to purchase soon. Thanks!
Love the design but way too small!, scale it up, so I can see it when in the air! Use to fly Flybar Nitro in the 80's. these are great Helis, but way too small to fly unless your in a restricted site!
Schade das du das nicht mal auf deutsch erklärst
Warum sollte ich? Englisch war 2023 die meistgesprochene Sprache der Welt mit 1.5 Milliarden Menschen, Deutsch dagegen auf Platz 12 mit 133 Millionen (www.ethnologue.com/insights/ethnologue200/). Dazwischen liegt ein Faktor von über 11. Ich bin zwar beider Sprachen mächtig, allerdings kostet die Produktion eines solchen Videos sehr viel Zeit (und das geht auf meine Freizeit, ich bekomme dafür nichts, ich monetarisiere meine Videos nicht einmal), weshalb ich die Sprache wähle, mit der ich auch die meisten Menschen erreiche, um den Nutzen und die Reichweite meiner Videos zu maximieren.
RUclips hat eine fantastische Funktion, die automatisch generierte und übersetzte Untertitel für sehr viele Sprachen einblenden kann, inklusive Deutsch. Ich kann jedem, der des Englischen nicht mächtig ist, nur empfehlen, diese Funktion zu nutzen.