If yer going to put your lid on your gloves on the floor then put the gloves palm up not palm down .... if you get grit on the palms of your gloves its real easy to damage your paintwork with it if you then put your gloved hand on the tank at any point 😉
Man..seriously the effor u put in those tiny clips.. and editing was seriously awesome... Most of em..wont recognize it... but if u have some editing exp.. definitely..u can see his hard wrk.. This Guy deserves more subs..
You can hold the ice cream tub to the tank by putting a decent magnet in the tub first, because you know that as soon as the tub is full, an elbow will send everything crashing to the floor.
I have a 'hack' that works very well. When removing decals, heat them first with a hair dryer. Wave a hair dryer over the decals and they will become soft, and peel right off in one piece, and leave very little glue behind. (But do NOT use a heat-gun as it will damage the paint.) A hair dryer works wonders.
I liked all of your hacks, they're very handy. However, for the first one, I would recommend either a different option, or and addition. Years ago, I got myself a magnetized tray, two in fact, a large and a small. Yes, there is a cost, but metal parts don't get lost. The addition I might recommend is to find some sort of strong magnet that you can secure to your ice cream tub. There's nothing worse than kicking or dropping your container of parts, as it sits precariously on your motorcycle seat, and losing most of them. Yes, put the lid on and cutting a hole in it is a nice trip back to the hack. Just an idea.
8:55 I use the good old 'I put my helmet on my arm...yes the maneuverability of the arm is a bit crappy but avoids any dirt to stick on my padding a small price to pay for salvation' method
Came up with the selfmade chinskirt years ago and it changed my life. The few people I got convinced of trying it said the same. Cheap helmets are sadly the go to in South America. I since have started to value my safety more, and better helmets mostly aren´t in need of this DIY upgrade.
Probably one of my greatest "hacks" is ALWAYS carry zip ties. You NEVER know when they may come in handy in about a zillion ways on the road and at the roadside :) Keep it up!
That's a great way to check chain slack thanks. The hack with the helmet on the gloves also very good. I've been doing it for years, and it works every time.
if you don't have a jack to raise the back wheel I put a big mallet aka hammer under my footpeg put the handle against a little curb or put in the grooves of the pavement to secure it remember always be sure it will not slip under it or make harse movements be subtly rotating the back wheel
First hack is amazing, I use a lot. Another interesting hack, is to use a large syringe and a hose to drain the brake fluid, without getting air into the system.
It’s amazing after all these years away from my second patriot country where i lived in vanderbijlpark for many years I follow someone who actually has a very good RUclips channel in which I follow very recently with all the attention in the world to this fellow motorcyclist, keep up the good work and cheers Boet keep it up
Ha ha, I have like 2 or 3 toothbrushes hanging around my toolboxes. Another helmet hack - Hang a carabiner onto your jean belt loops or somewhere on a backpack, do up the helmet strap and hang it off there. Useful when you're walking around and need 2 hands. Just gotta find a place where it hangs comfortably. These are all simple but great though, thanks man.
Here in the great white north you'll never have a problem finding an alternative to a spring hook, we play hockey and everyone has at least one ice skate lace tightener, eh.
If you still have your passenger pegs you could use those as a very secure helmet hanger. Flip the peg down, hang the helmet onto it by the chin strap, flip it back up. That helmet is not going anywhere.
I think hand sanitizer works way better at removing adhesive then straight rubbing alcohol. I think it has something to do with the viscosity of hand sanitizer and the fact that it doesn't evaporate as quickly..
Sub and like. My first bike - you needed wrenches to keep the goblins away. Straight screw driver and a 1/2 in - english Triumph wrench. It was a 70 Tiger 650. About every 200 miles - you had to pull over and pull the bowl off the single carb. Dump the rust and put it back on. Jets were always fine. You would know when to pull over - as she would not go over 50 mph - but she idled fine. 10 Min and you were rolling. Cheers.
If you tie helmet and open the back seat there is a hook like metal for helmets so u lock your helmet in the backseat to hang Yamaha fazer 600cc 2005 model does
The last several helmets I've purchased have not come with chin guards. Thank you! With the weather now, I've literally been covering that spot with my gloved hand.
Hey just watched 3 of your videos! Fun stuff! Cool trick I learned from the race track for cleaning your fairings, tank, helmet etc.... instead of the expensive plastics cleaner- use LEMON PLEDGE and a micro fiber cloth - just as effective and 1/10 the price! Also, spinning the bike 180!degrees on the kick stand- super helpful for parking/maneuvering . Keep it up!
The manly ladybug was the best one 😎, on your last video I did comment that was my favorite gopro mount! Thank you for this hack that will give me great shots, your videos are always inspiring and awesome! 💯😄
Most of the hacks I already knew, and even use some of them, such as the gloves on the ground, the sanitizer for cleaning, toothbrush, spanner. But I probably will use an old t-shirt to make a chin skirt for my other helmet, which didn't come with one. Love your videos!!! please keep them coming. They are very creative, beautiful lighting and imaging, informative, and very useful!
At 9:30, I'd prefer to keep the helmet on the pillion with the visor facing the tank. I do that many times on my R15 and it never falls, plus it looks really good if your taking pics
7:30, honestly it's easier to just barely complete the loop then you can get your finger in there and just pull it like that, safer too cos the pliers can still slip
ziptie -leave a big loop... use it to pull off the spring instead of the pliers.... then using the tip of a knife you can unlock the ziptie making them reusable too
If yer going to put your lid on your gloves on the floor then put the gloves palm up not palm down .... if you get grit on the palms of your gloves its real easy to damage your paintwork with it if you then put your gloved hand on the tank at any point 😉
Plus if it gets muddy or wet your hands might slipp of from handlebar...and you can't use your mobile, navigation system etc,
The toothbrush now has a distinct taste of minty road
Cool stuff. Tip at the zip tie tip (tip-ception): If you feed it in backwards, you can undo it and reuse after.
Man..seriously the effor u put in those tiny clips.. and editing was seriously awesome... Most of em..wont recognize it... but if u have some editing exp.. definitely..u can see his hard wrk.. This Guy deserves more subs..
Amen!!
Can't agree more...
It’s about the views, not the sups
MAN THE CHINGUARD TRICK IS ABSOLUTELY GOLD THANK YOU SO MUCH
I am going to try that.😁
CC: Sees WD40
Also CC: I’ll take your entire stock! 1:47
You can hold the ice cream tub to the tank by putting a decent magnet in the tub first, because you know that as soon as the tub is full, an elbow will send everything crashing to the floor.
I have a 'hack' that works very well. When removing decals, heat them first with a hair dryer. Wave a hair dryer over the decals and they will become soft, and peel right off in one piece, and leave very little glue behind. (But do NOT use a heat-gun as it will damage the paint.) A hair dryer works wonders.
I liked all of your hacks, they're very handy. However, for the first one, I would recommend either a different option, or and addition. Years ago, I got myself a magnetized tray, two in fact, a large and a small. Yes, there is a cost, but metal parts don't get lost. The addition I might recommend is to find some sort of strong magnet that you can secure to your ice cream tub. There's nothing worse than kicking or dropping your container of parts, as it sits precariously on your motorcycle seat, and losing most of them. Yes, put the lid on and cutting a hole in it is a nice trip back to the hack. Just an idea.
Hey man, hope you're enjoying our lovely UK weather lately 😂
Cant lie ur vids r kinda sick bro
@@edmeger Like your videos are nice.
that's cruel :-)
🤣🤣🤣
If you were still in South Africa you wouldn've had to worry bout the weather
8:55 I use the good old 'I put my helmet on my arm...yes the maneuverability of the arm is a bit crappy but avoids any dirt to stick on my padding a small price to pay for salvation' method
I love how smooth the transitions are between hacks. You definitely deserve more subs
The sanitizer hack is awesome as soon as I saw it I grabbed a rag and hand sanitizer and got that nasty residue off👍👍👍
But I tried 3to4 type sanitizer never clean at all
@@mrunnizuttan3973 it works best if it's above 70% alcohol and just needs some good ol elbow grease👍
Came up with the selfmade chinskirt years ago and it changed my life. The few people I got convinced of trying it said the same. Cheap helmets are sadly the go to in South America. I since have started to value my safety more, and better helmets mostly aren´t in need of this DIY upgrade.
...Paraguay?
@@Roscoe2671995 Yes.
Who else paused the vid to see if he actually used the dirty toothbrush? 😂
Fancy seeing you here 😉
Awesome - cleaning the dirty switches is perfect timing - my blinkers switch went on the blink this morning in the cold!
Alcohol attacks some plastics, particularly acrylics. WD-40 or similar light lube is a better adhesive remover than alcohol.
Nice easy tips. Thanks.
Probably one of my greatest "hacks" is ALWAYS carry zip ties. You NEVER know when they may come in handy in about a zillion ways on the road and at the roadside :) Keep it up!
Instructions unclear.
My toothbrush tastes like dirt
Again this biker making my day with best youtube videos😀😀😀
VR46 fan, nice 👌
Great tie-wrap tip, however i would have kept a 'O' shape and just pull with a finger instead of pliers that could slip
That chin skirt hack is genius!👌🤤
That's a great way to check chain slack thanks. The hack with the helmet on the gloves also very good. I've been doing it for years, and it works every time.
I love how he gives a story with his content.
Hacks that all riders can benefit from, great job CC! 👍🏻
6:00 what did Guy Martin ever do to you ?
I was like "noooooo😭"
Love the t shirt hack. I somehow lost my chin skirt
how did you manage to do that? (laughing emojis)
@@Saneadventures I think it wasn't fastened in properly and flew out while riding
if you don't have a jack to raise the back wheel I put a big mallet aka hammer under my footpeg put the handle against a little curb or put in the grooves of the pavement to secure it remember always be sure it will not slip under it or make harse movements be subtly rotating the back wheel
First hack is amazing, I use a lot. Another interesting hack, is to use a large syringe and a hose to drain the brake fluid, without getting air into the system.
It’s amazing after all these years away from my second patriot country where i lived in vanderbijlpark for many years I follow someone who actually has a very good RUclips channel in which I follow very recently with all the attention in the world to this fellow motorcyclist, keep up the good work and cheers Boet keep it up
Noooo, R.I.P. Guy Martin sticker :(
Ha ha, I have like 2 or 3 toothbrushes hanging around my toolboxes. Another helmet hack - Hang a carabiner onto your jean belt loops or somewhere on a backpack, do up the helmet strap and hang it off there. Useful when you're walking around and need 2 hands. Just gotta find a place where it hangs comfortably. These are all simple but great though, thanks man.
Here in the great white north you'll never have a problem finding an alternative to a spring hook, we play hockey and everyone has at least one ice skate lace tightener, eh.
This helped me a LOT! I canceled some of the wind noise of my helmet. Thank you
If you still have your passenger pegs you could use those as a very secure helmet hanger. Flip the peg down, hang the helmet onto it by the chin strap, flip it back up. That helmet is not going anywhere.
I thought ice-cream tubs and old toothbrushes were a staple in every biker's tool kit! 😁
Love the extra weight on the rear wheel hack 🍨
6:14 So you're a professional rapper 😂
Jeste🤣🤣
The zip tie on springs - absolutely 10 out 0f 10.
The rolling helmet - Had me hanging from the ceiling.
5:52 - Surprise hand sanitizer from my employer ✌🏻
I think hand sanitizer works way better at removing adhesive then straight rubbing alcohol. I think it has something to do with the viscosity of hand sanitizer and the fact that it doesn't evaporate as quickly..
Sub and like. My first bike - you needed wrenches to keep the goblins away. Straight screw driver and a 1/2 in - english Triumph wrench. It was a 70 Tiger 650. About every 200 miles - you had to pull over and pull the bowl off the single carb. Dump the rust and put it back on. Jets were always fine. You would know when to pull over - as she would not go over 50 mph - but she idled fine. 10 Min and you were rolling. Cheers.
I always claim to be North Devons 2nd biggest motovlogger & got a bit worried when I saw Oakhampton, luckily that's in South Devon so I might be safe.
Lol your title is safe for now!
@@ChaosCauses thats a relief. I think you are currently Devons biggest motovlogger but c90adventures is catching up.
If you tie helmet and open the back seat there is a hook like metal for helmets so u lock your helmet in the backseat to hang Yamaha fazer 600cc 2005 model does
Paused this video to go remove the sticker on my bike now that I have something to remove the residue with haha great video as always!
The chin curtain idea is pretty brilliant
I really liked the ladybug timer, t-shirt and wrench hacks
Helmet on the footpeg is the way to go in my opinion, ideally pillion.
Ahhh never thought of zipties, great idea!
That chin curtain hack is brilliant
I always just use the tip of my boot to check chain quicker than getting a tool out
Finally some real motorcycle hacks
The last several helmets I've purchased have not come with chin guards. Thank you! With the weather now, I've literally been covering that spot with my gloved hand.
ice cream tubs are the most versatile thing ever, dont @ me
oh hell yeah, the toothbrush is a "must have" in every tool box!!
Hey just watched 3 of your videos! Fun stuff! Cool trick I learned from the race track for cleaning your fairings, tank, helmet etc.... instead of the expensive plastics cleaner- use LEMON PLEDGE and a micro fiber cloth - just as effective and 1/10 the price!
Also, spinning the bike 180!degrees on the kick stand- super helpful for parking/maneuvering .
Keep it up!
The Helmet chin guard is just Awesome.... N much more practical in daily routine.. Thanks mate.
The egg timer though 😂😂😂
No thanks for the icecream hack. I am rather trying to get the too much icecream out of myself...I will find other containers for my bike bolts. :))
NOTE:- Forget to mention, (6:32)The 'BABY'🏍️, is purely Sanitized...♥️
Great video man. Just loving this series of hacks👍🏻
Just bought a helmet ...forgot to order a chin skirt ...and now I see this video..sweet!!
this was another great video on bike hacks! love the skin skirt idea! will be cutting up a t-shirt this weekend!
Your all hacks are favourites.
Thumbs up for you. 👍👍👍
Loved the time lapse part 😍
in fact, the chin curtain is a must done, i have to do it myself, great job ..
Great video man I think my favorite is the helmet on top of the gloves
The manly ladybug was the best one 😎, on your last video I did comment that was my favorite gopro mount! Thank you for this hack that will give me great shots, your videos are always inspiring and awesome! 💯😄
I love the continuous story style of video to get from on thing to the next very creative!
You can also buy silicon remover spray to remove the glue from the stickers
6:30 Can this tip be used at removing helmet residue from by stickers without softening the poly???
Most of the hacks I already knew, and even use some of them, such as the gloves on the ground, the sanitizer for cleaning, toothbrush, spanner. But I probably will use an old t-shirt to make a chin skirt for my other helmet, which didn't come with one. Love your videos!!! please keep them coming. They are very creative, beautiful lighting and imaging, informative, and very useful!
Got to say... best part about this video was the name of the ice cream 🤣, great video
Thank you so much for the Chin skirt hack
I used to work at COOP back in 2005 and 2006! 😅
7:55 just me who remembered that song from seth bike hacks ??
U a mountainbiker too?😁
Norwegiandroneboy05 used to be but i still watch his vids
Does the alcohol trick work if im not in a pinch?
What cold weather jacket were you rocking towards the end with the mask on??
Very Very Good job , Mate .
I like the Egg Timer disco ......... ha ha ha hhaa......
It's the cable tie 1 for me👌👌
Best box for nuts and bolts I found are the egg packs. Also stacks but are divided in sections.
Great tips. Love the kitchen timer! 😆
At 9:30, I'd prefer to keep the helmet on the pillion with the visor facing the tank. I do that many times on my R15 and it never falls, plus it looks really good if your taking pics
Another well shot video and very helpful
за ветрозащитную юбку для подбородка особое спасибо! свою как раз потерял.
7:30, honestly it's easier to just barely complete the loop then you can get your finger in there and just pull it like that, safer too cos the pliers can still slip
I thought the same
Dude what jacket is that your wearing in the mask scene? The black denim style one?
Awesome tips n trick, mate. Thankyouu 😇🤩🤩
simple and useful hacks. found the helmet chin cover quite interesting.
What is the name of that toy ? you use for go pro to take that amazing time lapse ?
I would definitely use the kitchen timer hack if i had both the timer and gopro
nice video man!! ur video is top notch quality! love from philippines!!
As soon as this video finished I went straight to the Co-Op to buy that ice cream 🤣
Even Being Early I'm Always Late To Comment
Anyways Great Content As Always Keep Going Chaos!🙏💚
ziptie -leave a big loop... use it to pull off the spring instead of the pliers.... then using the tip of a knife you can unlock the ziptie making them reusable too
One gallon ice cream tubs are the most useful 👍
Calm down everybody!
He is back at doing great videos!
(The r1 is still missed though)
3:32 Thanks for that hack I really needed it👍.You saved my 70$.
Ladybug, for sure, so cute and genious.