I had to smile when I realised you had forgotten to lock the clip down on the air intake hose, then the look on your face when you realised you had missed that part. :-D
Might have been said before but you should put a smear of oil on the plug's thread so it won't bind in future... and also if you have some feeler gauges worth checking the spark gap :-) Finally finger tight, when screwing in new plugs, and then one quarter turn to finish it... any more and you can stuff the thread. Cheers and nice job... good little car!
Thanks Phil - I used to do all my servicing on my old bangers 20 years ago, but I lost confidence with my (much) newer cars. I love my Panda Cross to bits, so I'm enjoying your videos and servicing myself. More Panda videos please :)
"The coil pack is made out of rubber so you can't really go wrong" -- what can happen is the rubber can split when you try to pull out the coil pack. I dealt with this by using a piece of coat hanger wire with a small right-angled hook at the end to remove the coil pack by pulling it up from the bottom. It takes a bit of patience, but even when the rubber is split the coil pack still works.
Dobry tutorial. Ja jednak unikam wyjmowania wszystkich świec i potem montażu po kolei nowych ze względu na ryzyko że do otworu po świecy a co za tym odzie do cylindra może wam wpaść przypadkowo jakaś mała nasadka lub końcówka bit itp. To jest złośliwość rzeczy martwych. Jak byś chciał specjalnie tam coś wrzucić to będziesz pół godziny celował ale przypadkiem... to za pierwszym razem😅. Dlatego po wyjęciu starej świecy od razu montuję nowa i przechodzę do kolejnej.
Hi, Phils Panda, it is an excellent illustration move and 100% very useful for my FIAT Panda Twin Air Turbo. Very keen on watching the movie as well for replacing the Oil Filter, many thanks !
excellent clarity of speech and photography- also I've been quoted to change the FOUR plugs on my Panda Twinair....
I had to smile when I realised you had forgotten to lock the clip down on the air intake hose, then the look on your face when you realised you had missed that part. :-D
Might have been said before but you should put a smear of oil on the plug's thread so it won't bind in future... and also if you have some feeler gauges worth checking the spark gap :-) Finally finger tight, when screwing in new plugs, and then one quarter turn to finish it... any more and you can stuff the thread. Cheers and nice job... good little car!
Can't be genuine he didn't swear once!
hi thanks for comment ...Not many panda videos on here so i thought i would make one.Also save some money at the dealers..
Thank you Phil.
Thanks Phil - I used to do all my servicing on my old bangers 20 years ago, but I lost confidence with my (much) newer cars. I love my Panda Cross to bits, so I'm enjoying your videos and servicing myself. More Panda videos please :)
Great video, I might give it a go myself! Will you be doing an oil change video at some point. Thank you.
How is your panda doing
"The coil pack is made out of rubber so you can't really go wrong" -- what can happen is the rubber can split when you try to pull out the coil pack. I dealt with this by using a piece of coat hanger wire with a small right-angled hook at the end to remove the coil pack by pulling it up from the bottom. It takes a bit of patience, but even when the rubber is split the coil pack still works.
You almost forgot the handcuff. Thanks for the good explanation.
Nice, mr Phil Panda ! Now I can do this job by myself on my 500 TwinAir.
Dobry tutorial. Ja jednak unikam wyjmowania wszystkich świec i potem montażu po kolei nowych ze względu na ryzyko że do otworu po świecy a co za tym odzie do cylindra może wam wpaść przypadkowo jakaś mała nasadka lub końcówka bit itp. To jest złośliwość rzeczy martwych. Jak byś chciał specjalnie tam coś wrzucić to będziesz pół godziny celował ale przypadkiem... to za pierwszym razem😅. Dlatego po wyjęciu starej świecy od razu montuję nowa i przechodzę do kolejnej.
Hey Phil, great and unique content. Please post more DIY videos.
Hi, Phils Panda, it is an excellent illustration move and 100% very useful for my FIAT Panda Twin Air Turbo. Very keen on watching the movie as well for replacing the Oil Filter, many thanks !
Tks Phil, this is very clear. I couldn't find the same video in French. Good job !
Enjoyed it very informative have a Panda Cross had it a year from new love it.
Excellent video. Simply and clearly explained. Thank you
Thank you Phil panda 🐼, brilliant video thanks for posting it
Great info and easy to follow