I always wanted to sponsor a race car! I'm not Kubota, but I do what I can. If every subscriber of this channel sent $20 BBR could buy two new race car engines and a toter! That's not going to happen, but we can all pitch in what we can and get Brad back in the drivers seat ASAP. Many blessing to all and Merry Christmas!
With air bags you still be able to to lower it at the track to unload easier but also make heads turn when they see the trailer lower one of a kind trailer
The trailer is looking really good. But looks a little low for the rollers to be on it. But you can always lower the hitch to set the trailer level after loading
Trailer is turning out sharpe and next to the race and maintenance videos. The fabrication videos are a close second. You all have a very Merry Christmas and a Happy New Year.
2 ideas. Blocks in reverse of lowering blocks. Are axles over the springs? Could put them under. Probably wouldn’t hurt to come up a couple of inches. Sure looks cool as hell slammed. Last resort, shackles. Just a thought. I heard you giggle at the situation.v
I had this problem with my trailer being too low when I build it I had to add square tubing above the axles and well the brackets for the leaf springs on that square tubing I ended up having to raise mine 2 inches so I use 2 in.² tubing it raised the deck of the trailerand worked perfect.
Sorry to be negative, im sure your gonna have issues with your trailer bending in the center. Before you go any further. I would cut loose the axle hangers and fill in the center. Before you have issues.
When i got my trailer built the axles were to far forward and it swayed really bad at 65 mph. Yours looks awesome! Should have called you to build it.😊
Seems really weak where the axels are mounted. Good bracing in the front and back but i hope that thing doesn't bow in the middle. Its not too late to brace it up now.
Was u inthe service Brad or your dad i noticed the service branch logos if so Yallare True AMERICAN HEROES inmu opinion as are eac and every oneof our Service Members Thank each and everyone of yall for protecting us
No sir. None of us were in the service although we have some close family members that were. We just appreciate our service men and women & the sacrifice they make.
I always wanted to sponsor a race car! I'm not Kubota, but I do what I can. If every subscriber of this channel sent $20 BBR could buy two new race car engines and a toter! That's not going to happen, but we can all pitch in what we can and get Brad back in the drivers seat ASAP. Many blessing to all and Merry Christmas!
Trailers looking good. Might see some sparklers at night, but at least the nose won't catch when loading/ unloading!
Thank you! We’ve actually raised it now
Coming together, looks good
Thank you!
Good job buddy. Trl. Looks good!
Looks good.
Brad that trailer looks amazing very well put together. I’d be very proud to own it.❤❤😮😮😮😅😅😅
Thank you!
If you put small air bags on it you should get the ground clearance you will need to get down the road when traveling
We thought about some air bags but we’re gonna make some changes with the axles first.
With air bags you still be able to to lower it at the track to unload easier but also make heads turn when they see the trailer lower one of a kind trailer
Make the axel’s tandem floaters, that will give you 3 to 4 inches in trailer height!!!!
We raised the whole trailer a couple inches
The trailer is looking really good. But looks a little low for the rollers to be on it. But you can always lower the hitch to set the trailer level after loading
Thank you! We’ve raised it now
@daysofdirtwithbradberryracing oh ok. I really like the trailer build for sure. Good looking rig
Trailer is turning out sharpe and next to the race and maintenance videos. The fabrication videos are a close second. You all have a very Merry Christmas and a Happy New Year.
Thank you so much! Merry Christmas and happy new year!
2 ideas. Blocks in reverse of lowering blocks. Are axles over the springs? Could put them under. Probably wouldn’t hurt to come up a couple of inches. Sure looks cool as hell slammed. Last resort, shackles. Just a thought. I heard you giggle at the situation.v
Thank you! We’ve raised it up some
I had this problem with my trailer being too low when I build it I had to add square tubing above the axles and well the brackets for the leaf springs on that square tubing I ended up having to raise mine 2 inches so I use 2 in.² tubing it raised the deck of the trailerand worked perfect.
That’s exactly what we are doing
Sorry to be negative, im sure your gonna have issues with your trailer bending in the center. Before you go any further. I would cut loose the axle hangers and fill in the center. Before you have issues.
Looks killer y’all!! I may have to consider regular axles over the drop axles. This heavy factory stock may cause her to flex a little more.
We’re currently putting some 2x3 in where the springs are to raise it. You may could get by without doing a dove tail.
@ that’s true!
That extra time spent getting the axles dead on will for sure pay off down the road on tires and how it pulls 👍
Yes sir! We definitely feel like it will
When i got my trailer built the axles were to far forward and it swayed really bad at 65 mph. Yours looks awesome! Should have called you to build it.😊
Thank you!
Might not be a bad idea to put 2x3 tubing above the axle mounts. It will raise up the trailer some and take the flex out
That’s the plan!
It’s turning out sharp
Thank you!
Looks awesome!! Might need to fabricate a lift kit but looks awesome anyhow yall
Thank you! He’s gonna get it lifted up a little more!
Seems really weak where the axels are mounted. Good bracing in the front and back but i hope that thing doesn't bow in the middle. Its not too late to brace it up now.
When you bounced on the rear. It looked to be flexing in the center of the trailer.
Merry Christmas to your family!
Merry Christmas!
Built not bought good job y'all
Thank you
Put the springs on top of the axle instead of using the underslung style
Was u inthe service Brad or your dad i noticed the service branch logos if so Yallare True AMERICAN HEROES inmu opinion as are eac and every oneof our Service Members Thank each and everyone of yall for protecting us
No sir. None of us were in the service although we have some close family members that were. We just appreciate our service men and women & the sacrifice they make.
How high is the hitch? The tongue looked only 8-9" off the ground
The hitch was 7 inches but we’ve since raised it up.
That is a really good lookin race car trailer and i would bet bout anything if you built a few in different colors you would sell the hell out of them
Thank you!
Trailer looks good..iam going to start calling Brad LowRider lol
Thank you! 😅
How much you have in it brad not the labor ? Its sweet
Thank you! We’re around 5k