Jaeger LeCoultre Atomos Clock Repair

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 49

  • @cfk8593
    @cfk8593 Год назад

    My sister inherited my grandfather's Atmos, only to have a friend over-spin the pendulum in attempts to get it to start running. I promised her I would attempt to fix it for her. This video will be a huge help. Thank you!

  • @AnonYmous-ry2jn
    @AnonYmous-ry2jn 3 года назад +7

    This is a delightful video obviously recording a retired clocksmith in his waning years during the beginning years of home video: probably recorded between about 1978-1985, but probably closer to 1980. As such it is a fascinating document from a person’s life showing his understanding and passion for his craft, moreover one allowing him to share his wisdom -and enrich us- from beyond the grave. You can tell from his voice he hasn’t many years left, which by now would have been 40 years ago. Sad and touching but also nice.

    • @AnonYmous-ry2jn
      @AnonYmous-ry2jn 3 года назад +5

      I’ll add moreover that it’s fascinating/touching that he’s working on a perpetual clock, so he in effect lived on through this device that he puts his heart, wisdom and effort into, a clock that will count out in perpetuity the hours, minutes beyond this man’s physical life.
      In other words, a strange expression of mortality, transcended: a man’s skill & passion giving him a kind of perpetual life through his craft. That goes for the clock & the video of its repair multiplying this through all the clocks repaired by influence/inspiration of this video. We all live on thorough our impacts, but this man’s unique video brings this out powerfully, poignantly.

    • @berryj.greene7090
      @berryj.greene7090 3 года назад +1

      @@AnonYmous-ry2jn For me to play my part in perpetuating the echoes of a life spent in time I will need an Atmos clock and the money to afford it....... I wonder if they're going to let me have it in jail?

    • @AnonYmous-ry2jn
      @AnonYmous-ry2jn 3 года назад +2

      @@berryj.greene7090 I'm in the same boat, pining for an Atmos I can't afford.

  • @markalbanese8147
    @markalbanese8147 2 года назад

    I'm a retired mechanical engineer who just bought his first Atmos clock on Ebay. I'm so glad I stumbled across your video on this clock! You have a way of presenting this material that makes it seem "easy". I'm now confident that I can tackle the project of getting this clock back into operation. I'm looking forward to viewing ALL of your videos. Thank you for sharing your knowledge.

  • @fenderbender8556
    @fenderbender8556 4 года назад +3

    Thank you for sharing this invaluable knowledge. I am watch & clockmaker. I own 2 Atmos (both bought on eBay). One of them (a model 519) has recently stopped running after running non stop for a year and a half. This video will help me to overhaul the unit & get it running again. I'm sure it just needs a good cleaning & mainspring oiling. I just bought the Atmos tool kit from Timesavers. So I'll be ready to do everything the right way! Thanks again!

  • @ПашаПитецкий
    @ПашаПитецкий 8 месяцев назад

    На Україні,я не бачив такого годинника,але тепер буду знати ,як його виправити,щоб годинник радував нас, дякую вам за працю 😊❤

  • @johnbaker6810
    @johnbaker6810 3 года назад +1

    Excellent video thanks for sharing your knowledge I have two atoms clocks that are working i will now attempt a strip down clean ,checks,and fit back together.
    Stay safe
    John.

  • @richardadelberg8961
    @richardadelberg8961 Год назад +1

    I’m a regular omega, pp, Rolex Watchmaster . I see you assemble touching movement parts without finger cots? I gather the skil oils and skin dust doesn’t bother these parts?

  • @tkeasyalways
    @tkeasyalways 6 лет назад +4

    This is fascinating. Thanks for sharing.

  • @moexobi724
    @moexobi724 2 года назад +1

    Thanks but I would like to see how you washed the watch and how you lubricated it and what kind of oil.

  • @jagdishsalian7201
    @jagdishsalian7201 4 года назад +1

    Hello sir my name is Jagdish from India Mumbai, I am a watch maker in Richmont group mumbai service center, it was great knowledgeable video shared with all tiny details, how to handle each thing,how to assemble each part with lot of precaution,Thanks

  • @jimnunes6286
    @jimnunes6286 7 месяцев назад

    Great information
    THANK YOU!!!

  • @clockshop7485
    @clockshop7485 4 года назад +1

    Wish the video quality was better, but I learned a lot. thanks!

  • @petersasnauskas5319
    @petersasnauskas5319 6 лет назад +4

    excellent, thank's for sharing.

  • @eduvail
    @eduvail 4 года назад +2

    Mike where can I get a new bellow

  • @hmtjawanmilitarywatchesvin7895
    @hmtjawanmilitarywatchesvin7895 5 лет назад +2

    I have same clock so not running please suggest me the suspension spring I buy please find it

  • @johnschauer3334
    @johnschauer3334 Год назад

    Hi there I'm Johnny and I'm curious to know where I can find parts for a 519?

  • @barrywilkinson3420
    @barrywilkinson3420 2 года назад

    I am watching this in March 2022. It is too bad that most of it is out of focus, a little. It is very informative.

  • @anibalscuadroni4685
    @anibalscuadroni4685 2 года назад

    just bought an Atmos Clock. Can you check it and/or overhaul it?
    How do I get in touch with your shop?

  • @willf5768
    @willf5768 5 лет назад +2

    Great video!! So a question I have one of these with a broken chain what's the easiest procedure to attack that repair with the minimal disassembly. And would you repair the old chain or replace the whole thing?

    • @jimadams4260
      @jimadams4260 4 года назад +1

      Did you ever get the question answered? I have one that the chain has broken twice and I have a new chain I need to install. Any suggestions on the best way to do this, and can it be done without disassembling the movement?

    • @willf5768
      @willf5768 4 года назад +2

      @@jimadams4260 I didn't get the question answered so I went full commando and attached the new chain (had to take the bellow's off and run the new chain where it had to go and I cut a link attached the remaining link with the new one and soldered the cut link . And it was no easy task doing it with the clock assembled But I did it and the clock ran but stops after a couple days so there is other issues that need attention so the broken chain wasn't the total fix only part of it. to solder the chain link I used a pretty hot soldering iron with a very pointed tip and put tin foil on the places I didn't want solder to fall on and using magnifying glasses to see what I was doing I managed to connect the chain . Don't by after market cheap chain they are garbage buy a good quality one and save yourself some headaches. This is not probably the proper way to repair these chains the best way would be dissemble the clock and just clean everything properly I just tried it to see if I could get away with it and I guess I did.
      Good luck

    • @whatsstefon
      @whatsstefon 3 года назад +1

      @@willf5768 I’m repairing one now with a broken chain and pulley spring. I haven’t found a local (Australian) source yet, so I might have to order the spring from a US based source and pay the rich shipping fees. As for the chain, a jeweller friend is going to take a look at it and determine whether or not it’s worth soldering the links as it seems the metal has fatigued and is weak. I’ll hold off until he gives me his verdict in case I need to just order a new chain. Might as well grab both the chain and pulley spring together.

    • @willf5768
      @willf5768 3 года назад +1

      @@whatsstefon I ended up buying a chain off Ebay for $10.00 and carefully soldered it to the remaining piece on the clock worked it back through to where it attaches in the back of the clock put it together and it would run for about three days and mysteriously stop start again and again it would stop so I'm assuming it needs a tear down and cleaning which would be difficult being I don't have the proper tools to do so so its in limbo land at the moment. Note when I looked at the clock and took the expansion tank or bellows and out I found the chain was in like four pieces so not sure what caused that but must have been a violent occurrence I'm thinking I think as well when I received the clock the pendulum wasn't locked and who knows how long or how many times it had been bumped and moved about probably damaging the pallet fort or suspension spring. Some day perhaps I'll find or make my own tools and try to service the clock and see what happens.

    • @whatsstefon
      @whatsstefon 3 года назад +2

      @@willf5768 thank you for that insight into your experience. I have “wound” the clock and it appears to work well. So really I’m hoping that I just replace or repair this chain and the spring which I will replace with a new one and the clock should be okay.

  • @flaviomartinewski2338
    @flaviomartinewski2338 5 лет назад +1

    troquei suspensao do ATMOS ele atrasa 1 hora por dia. a suspensao comprei mercado paralelo,foi unica q encontei.
    Onde posso comprar suspensao original.

  • @FloridaClay
    @FloridaClay 5 лет назад +1

    I really appreciate the video. Was it made some years ago? The low resolution suggests that might be the case.

  • @dominiquedupuy7597
    @dominiquedupuy7597 Год назад

    Merci beaucoup

  • @hamilton50th
    @hamilton50th 4 года назад +1

    Most enjoyable

  • @andyhuang6479
    @andyhuang6479 3 года назад

    維修費用多少錢呢

  • @atmosrepair
    @atmosrepair 3 года назад

    We should honor this man. What is his name @lost learning

  • @atmosrepair
    @atmosrepair 5 лет назад +4

    Attempt this at your own risk. He didn't overhaul mainspring, which means the main power source hasn't been cleaned. Also the plate bushings get gummed up, and he didn't even look at those.

    • @abikelife1481
      @abikelife1481 3 года назад +2

      Give him some credit

    • @atmosrepair
      @atmosrepair 3 года назад +1

      @@abikelife1481 absolutely right! This was before the internet age I think? So he was making due with what he had access to! I like his balance posing tool. At least looked solid, didn't try it myself yet

  • @thegregolahorologyclub6799
    @thegregolahorologyclub6799 6 лет назад +2

    So where are these recordings coming from? They don’t look like they were originally intended for RUclips. They certainly don’t look like they are from the 21at century.

    • @johndevries7122
      @johndevries7122 4 года назад +1

      Hi, I think this is still made with one of the first video cameras and was later transferred to digital. I also suspect that this clockmaker is no longer alive because there is no response to questions. It was just found by someone who found it interesting .... hence lost learning

    • @AnonYmous-ry2jn
      @AnonYmous-ry2jn 3 года назад +2

      This is a delightful video obviously recording a retired clocksmith in his waning years during the beginning years of home video: probably recorded between about 1978-1985, but probably closer to 1980. As such it is a fascinating document from a person’s life showing his understanding and passion for his craft, moreover one allowing him to share his wisdom -and enrich us- from beyond the grave. You can tell from his voice he hasn’t many years left, which by now would have been 40 years ago. Sad and touching but also nice.

    • @AnonYmous-ry2jn
      @AnonYmous-ry2jn 3 года назад +2

      I’ll add moreover that it’s fascinating/touching that he’s working on a perpetual clock, so he in effect lived on through this device that he puts his heart, wisdom and effort into, a clock that will count out on perpetuity the hours beyond this man’s physical life.
      In other words, a strange expression of morality, and a man’s craft/artistry giving him a kind of perpetual life through his craft. That goes for the clock and the video of its repair multiplying this through all the clocks repaired by influence/inspiration of this video. We all live on thorough our impacts, but this man’s unique video brings this out powerfully, poignantly.

  • @יוסףבקמן
    @יוסףבקמן 2 года назад

    Clock Expert is Tony Maya Fusco

  • @atmosrepair
    @atmosrepair 5 лет назад +4

    Wear gloves, your fingerprints will be found 30 yrs later

  • @ryanmoses2570
    @ryanmoses2570 2 года назад

    Who is this man?

    • @necro_nemesis
      @necro_nemesis Год назад

      I believe it to a video made by retired watchmaker Anthony "Tony" Montefusco. I found the video very informative and the information within... timeless. If it were at all possible I would thank you for your lasting contribution sir.

  • @ryanmoses2570
    @ryanmoses2570 2 года назад

    For everyone responding to these videos, Anthonio 'Tony' Montefusco passed away in May 2011.

  • @berndmayer3984
    @berndmayer3984 2 года назад

    ATMOS not Atomos

  • @zoom7533
    @zoom7533 Год назад

    Atmos