Making Home Made Gas Checks Using The Pat Marlins 30 Caliber Gas Check Maker Die
HTML-код
- Опубликовано: 25 окт 2022
- Make sure to subscribe!
/ dummyround
/ dummyround
/ dummyroundofficial
rumble.com/user/DummyRound
www.paypal.com/paypalme/dummy...
dummyroundreloading.com/
Well now , that confirms that I don't want to get involved with making gas checks . Good info for those that do want to .
It is definitely a lot of work, and I'm glad we can still just powder coat alone if we want. But, I figured I'd start with my most used caliber and have another option to play with. Some say they help accuracy if a bullet allows a gc, some say pc only is better. I guess I'll have to test it on my own!
@@DummyRound There are a few things that can cause the gas check to be worse also . If the check is not formed flat , not installed correctly , if the sprue cut left a bump on the bullet base and probably a few other things I'm not thinking of .
Yessir, always more variables than we can imagine.
Pile of shame👍🍻 That aint bad on the cost👍👍
It'll pay for itself..... eventually lol
Had a Pat Marlins. Ended up selling it because I did not like the two step process. Ended up building a one stroke with plans from the internet. Much happier, sold the Pat Marlins.
It is a pain in the ass and my next GC dies will be a single step process.
Neat process
Thanks🇺🇸👊
Nice product
Not too bad. There are other designs that work with 1 step.
Cool 👍
Thank you my brother!
Laborious
WORTH IT
Interesting GC die!
It's pretty cool but there are 1 step dies now available. This one works, just have to punch and then form your checks. Thanks!
🤘🏼💪🏼👍🏼🤟🏽🇺🇸🤟🏽👍🏼💪🏼
Hump dayyyyyyyy
Enjoyed the video, but will probably not making GC soon. Thanks for the demo :-))
Not the most fun on the bench, but it has it's place🇺🇸👍👊
Where did you get the gas check maker from , nevermind I found the web page.
There you go!
Put him over in the pile of shame... 🤣🤣
I have a surprisingly large pile of shame near my reloading bench lol
Couldn't you just powder coat instead?
You could certainly do that. You can also do both. With PC, it doesn't do much more to prevent leading, but moreso insures a consistent and even base on your bullet, which should aid in accuracy. I'll definitely compare groups of PC+GC vs PC alone when I get to it. Thanks!
If you powder coat, and add GC’s…. You can push them almost like jacketed.
Yeah… not a fan of Pat Marlins.
1) Rediculous long time from order/ payment to delivery.
2) if you ask him why, you get a song and dance about not being able to get materials, because of Covid, even though other check die makers are putting them out.
3) Two step / stroke process just too much, while there are simple one stroke setups for same price.
4) the design is a PITA. Switching ends around and fastening set screws… and wait until you accidentally bust one off.
5) you have to make strips to feed into the slot. Most other models are just one sided slits, so your strips don’t need to be so precise.
I bought two, that I had to wait several months for. Bought two single stroke ones, else where, and sold the marlins, as soon as they showed up.
Yep, I'm definitely looking at the 1 Stroke from 22LRReloader. The wait time was crazy and two step process is kinda tedious. It's nice to have an option, but I'm not itching to crank out a batch of them, either. Which brand did you go with?
@@DummyRound I , personally like DMattesons, I own several… however Hurricane Ian destroyed their home and shop. Will prolly take them a while to get back going. I’ve heard good things about 22 reloader, but I don’t have any.
Edit: I should say, nothing personal about marlins, other than lead time…. He does make a super high quality die… it a solid, precise piece of machining, by a master craftsman. Just to me, the actual design and function drive me away.
Does Matteson have a page outside of FB?
Thanks!
لطفا هل يمكن ان ترسل لي مخطط وتصميم بهذه الاشياء التي تعمل بها لكي يتسنى لي ان اصنع واحده مثلها لطفا،
Try patmarlins.com/product-category/checkmaker/
صديقي العزيز هل هناك طريقه لصناعة الكبسوله للاطلاقه وهل تستطيع ارسال مخطط القوالب لتلك الكبسوله حتى لو كان مخطط بياني لكي يتسنى لي صنعها
It isn't my design, but I'm sure there are some out there if you search for it
You start buying that much copper you going to have the ATF at your door just kidding! Yea I will just buy mine!
I'm sure I'm already on plenty of their lists🤣
...more tedious than laborious..
That's the word!
Not a fan, piece of junk, i got about a hundred aluminum checks before it started tearing the stock.
Do yourself a favor don't buy this nightmare look elsewhere.
I haven't had any issues yet, but I've only made a few hundred from copper so far. Did you contact Pat about your problem?
There junk don't waste you money
There's definitely better, one stroke, designs out there I hear people are enjoying👍