Purchase it from JDiag Electronics Technology Co.,Ltd Good TPMS can work on both GM and Ford cars www.amazon.com/JDiag-EL-50448-Activation-GM-Ford/dp/B0772NN4QV/ref=sr_1_316?keywords=tpms+sensor&qid=1552978070&s=automotive&sr=1-316
lazy fa sho , i just purchaced this same tpms relean today after i had to go to the dealer this mornin , fuck em i wont have to go back to do this ever again , thanks man
Glad this video helped you out. If you haven't already can you thumb up my video? It helps my channel grow a lot. I buy all my gear no sponsors I use the extra funds I make on yt to review gear. Thanks buddy.
Thank you my Brother! You are the only site on the internet that let me know the HORN beeps Twice when it goes in the RELEARNING Mode!! It work GREAT and NO issues now! Thank you very much!
Tip- Make sure parking brake is on before you turn ignition on. My 2015 Sierra would not go into learning mode when I applied the park brake after turning ignition on. As for the comments that you don’t need the tool , just go thru the sequence by adding or letting air out. This was true on my 2011 Sierra but somewhere between 2011 and 2015 GM changed it so you have to have the tool. Bless their hearts.
hi John, 2015 silverado 2500HD LTZ 6.6L duramax - followed your advice and it worked a treat. Would give a jellyfish a horn. Much appreciated from Australia mate.
Just stopping by in the comments helps me out a lot. RUclips is more ilkely to promote my channel hen theres comment participation and thumbs ups. When I see videos from Australia I see a lot of Hiluxs and smaller SUVs are big pick ups rare there?
@@JohnDrivesAnything yeah rare here most popular Toyotas - but Silverao, RAM's and F250 have a dedicated following - awesome tow tugs - such that its not the tail wagging the do if you understand what I mean
Bought this one. Worked great. A year later the battery died. When I removed the battery the prongs came out with it and broke. Never dropped it, just removed the battery and no more.
This tool also works on learning the trailer TPMS sensors included with some 2019 and 2020 Chevy/GMC 1500 pickups. I just had the sensors installed on my travel trailer and it worked just as advertised. The only difference between the vehicle and the trailer is the sequence is different. Trailer tire learning sequence is left front, left rear, right rear, right front. Just go by the horn sounding each time a sensor is learned, as there are no light indications. And when you're done, you'll get a two chirp signal after the single chirp from the last tire that lets you know you successfully learned all the sensors. You also have a two minute countdown timer, so don't dawdle around. Now I can monitor all four trailer tire pressures and temps on my infotainment screen.
thx i was stumped and thought my tool was not working. the 90’ to the stem was critical. 3 of the 4 stem sensors were on the inside of my tires the first tire set on the outside of the rim - calibrated and done !!! thanks!
Very useful clip. The fact that the tyre shop messed up meant that something else was shown in the video. By the way, when you Americans start to spell words correctly :)
Thanks for uploading. Got my wheels redone and swapped out and they have the sensors set on the wrong tire corners. Instead of going back, I just ordered myself the tool. Hopefully its an easy fix and save myself the drive back to the off-road shop to reset it and waste a day off of work to drive out there. Seem pretty simple tool to use. (fingers crossed)
@@LifeOutsideSP Did you make sure to aim the tool right under the valve stem? Your truck is still under 5 years old isnt it so I dont think the sensor batteries should be bad already
So watching your video, you're really saying the dealership didn't do anything wrong.... Since the wheel didn't have a TPMS installed. Got it. Thanks for the info.
Glad this video helped you out.Can you give it a thumbs up if you haven't already. I appreciate you stopping by and participating in the comments. It helps my channel a lot.
Purchase it from JDiag Electronics Technology Co.,Ltd Good TPMS can work on both GM and Ford cars www.amazon.com/JDiag-EL-50448-Pressure-GM-Ford/dp/B079HG6WCP/ref=sr_1_457?keywords=tpms+sensor&qid=1552978159&s=automotive&sr=1-457
Just got the tool and tried....... I recently had a back tired replaced at Walmart last Dec and the back 2 sensors had been working, my fronts died last year and last Saturday I had 2 new tires put on and sensors at walmart, but they said their machine needed to be charged up so went back Monday and got hit with the back sensors were not showing up now and the other rear tire needed to be replaced, said dry rot even though it looks almost new. So I just ended up leaving, not really able buy another new tire / mounting / road hazard fees and 2 more sensors. So I' guess all the sensors maybe need to be the same brand in order to relearn...... On my 2009 Impala you use the keyfob and press 2 buttons to start the relearn, it did beep on the 2 new front tires (I guess universal replacements) but no luck on the rears being found / horn beeping. So I'm guessing letting the air out to set may not work either, I've not tried yet. When I got there Monday they said I could sit in the car but they never set up the dash to relearn or have the car on.......... I was going to have them do 2 new sensors but could not really buy another tire at this time since on SS... Thanks
Worked on a 2012 Chevrolet Traverse LTZ. Replaced one TPMS sensor using Shrader GM. Vehicle did not read the new sensor. Deflate technique didn't work. The VXDAS EL-50448 worked on the first try.
You can buy this tool on amazon for $15, but the same exact tool on the GM website is $65. You used to be able to relearn your tpms without a tool, just by letting some air out of each tire. Hey GM, how bout you stop ripping off your customers?
The spare tire didn't have a sensor so I just read the tire in the bed when it was fixed. Of course I transfered the fixed tire back to where it belonged.
Is this the same sequence for 2015 Chevy Silverado 2500HD please ie would you expect indicators to come on to show you the sequence, note instructions from VXDAS EL-50448 p poor
@@deep8873 I see some silverados can reset the TPMS by letting air out of each tire in a sequence. Hopefully all you need is this tool. they are only $10 now
I tried it on a Nissan Frontier and it didn't work. Some people claimed to have done it in Nissan Versa, Altima, and Xterra using the same tool. It didn't work for me.
Purchase it from JDiag Electronics Technology Co.,Ltd Good TPMS can work on both GM and Ford cars www.amazon.com/JDiag-EL-50448-Pressure-GM-Ford/dp/B079HG6WCP/ref=sr_1_457?keywords=tpms+sensor&qid=1552978159&s=automotive&sr=1-457
I replaced a tire with my spare on my ZR2 and the sensor went out I bought the tire sensor reader and did exactly what you did. But it would the sensor light keeps popping back up and have to do the procedure again. Does it happen to you too?
Purchase it from JDiag Electronics Technology Co.,Ltd Good TPMS can work on both GM and Ford cars www.amazon.com/JDiag-EL-50448-Pressure-GM-Ford/dp/B079HG6WCP/ref=sr_1_457?keywords=tpms+sensor&qid=1552978159&s=automotive&sr=1-457
hate all these electronics. The less electronics the less things to break. I'm getting a newish car at the end of the year and I really hope it doesn't have this many electronics in it.
Does your cars rim have matching rims with the non spares? It's nice this truck has a matching rim. I told my dad to get a pressure sensor so he can rotate 5 tires vs 4
@@JohnDrivesAnything no idea what matching rim means. Just know the tyre pressure is 450 kpa in the spare and it has no sensor, and all other have opel sensor and should be 220 according to the info bracket on the passenger side.
This was when this truck was still new. My dad got the spare checked. There was no TPMS so he got one put in so he can rotate all 5 tires in. He's still on the stock tires 5 years later lol. I think it's time to get new ones!
This is straight up lazy. The Tire Pressure relearn literally takes 2 minutes. I'm pretty sure most dealers don't do the re-learn. I only found out it wasn't done because of a flat.
Let me explain. When I say "capitalism", I'm not proposing the replacement of the system. It's just a complaint about the way the dealer and the manufacturer, and the capitalists as a whole treats the consumer. When they use pratices such as scheduled (forced) obsolescence, or simply when you pay for a service in the tires and they don't reinstall (including re-learn) the TPMS, what is, for me, an obvious procedure. In my country, car services are even worse. Some services, I better do. Not for the money, but for the "lazy" or bad people. Of course it's good when you can buy your own tool and do the job. I said less than I wanted to say in the previous comment. Thank you for the feedback.
Did the technicians not know how to do the re-learn procedure or are they lazy? I say lazy.
Purchase it from JDiag Electronics Technology Co.,Ltd Good TPMS can work on both GM and Ford cars
www.amazon.com/JDiag-EL-50448-Activation-GM-Ford/dp/B0772NN4QV/ref=sr_1_316?keywords=tpms+sensor&qid=1552978070&s=automotive&sr=1-316
lazy fa sho , i just purchaced this same tpms relean today after i had to go to the dealer this mornin , fuck em i wont have to go back to do this ever again , thanks man
probably just forgot. Those procedures are done my young apprentice techs. Sometimes the young ones forget. I’m guilty of this unfortunately.
Instructions were garbage, this quick tutorial was spot on. Thank you (this worked on my 2016 cadillac ats)
Glad this video helped you out. If you haven't already can you thumb up my video? It helps my channel grow a lot. I buy all my gear no sponsors I use the extra funds I make on yt to review gear. Thanks buddy.
Thanks for straight to the point video with clear explanations
Glad this video helped you out.
Thank you my Brother! You are the only site on the internet that let me know the HORN beeps Twice when it goes in the RELEARNING Mode!! It work GREAT and NO issues now! Thank you very much!
Right on man, glad this video helped you out. Hope you're having a good weekend buddy
Tip- Make sure parking brake is on before you turn ignition on. My 2015 Sierra would not go into learning mode when I applied the park brake after turning ignition on. As for the comments that you don’t need the tool , just go thru the sequence by adding or letting air out. This was true on my 2011 Sierra but somewhere between 2011 and 2015 GM changed it so you have to have the tool. Bless their hearts.
@95B THUMPER It’s a CHEVY Colorado ZR2, not a Ford.
My 15 2500HD needed this tool to relearn . Adding or releasing the didn’t work.
Thanks broh just read the manual, but it makes it much easier seeing it live ..
Glad this video helped you out. IF you haven't already can I get a thumbs up? Helps my channel a lot. Have a good one buddy
hi John, 2015 silverado 2500HD LTZ 6.6L duramax - followed your advice and it worked a treat. Would give a jellyfish a horn. Much appreciated from Australia mate.
Just stopping by in the comments helps me out a lot. RUclips is more ilkely to promote my channel hen theres comment participation and thumbs ups.
When I see videos from Australia I see a lot of Hiluxs and smaller SUVs are big pick ups rare there?
@@JohnDrivesAnything yeah rare here most popular Toyotas - but Silverao, RAM's and F250 have a dedicated following - awesome tow tugs - such that its not the tail wagging the do if you understand what I mean
Bought this one. Worked great. A year later the battery died. When I removed the battery the prongs came out with it and broke. Never dropped it, just removed the battery and no more.
Just used on my 2017 Colorado LT. Worked great. Kept the button held, and it did take a few seconds on each wheel.
Right on glad this video helped you out
This tool also works on learning the trailer TPMS sensors included with some 2019 and 2020 Chevy/GMC 1500 pickups. I just had the sensors installed on my travel trailer and it worked just as advertised. The only difference between the vehicle and the trailer is the sequence is different. Trailer tire learning sequence is left front, left rear, right rear, right front. Just go by the horn sounding each time a sensor is learned, as there are no light indications. And when you're done, you'll get a two chirp signal after the single chirp from the last tire that lets you know you successfully learned all the sensors. You also have a two minute countdown timer, so don't dawdle around. Now I can monitor all four trailer tire pressures and temps on my infotainment screen.
Did your spare tire come with a sensor? Appreciate the input buddy
AutomotiveVlog No idea, but I’m guessing not.
thx i was stumped and thought my tool was not working. the 90’ to the stem was critical. 3 of the 4 stem sensors were on the inside of my tires the first tire set on the outside of the rim - calibrated and done !!! thanks!
Right on man, glad this video helped you out.
That was my exact situation! Thanks
Glad my video helped you out and thank you for letting me know. Comments help my channel a lot.
Very useful clip. The fact that the tyre shop messed up meant that something else was shown in the video. By the way, when you Americans start to spell words correctly :)
This video has actually made me a ton of income. I should thank the Dealer for not rotating and programing the tires lol
Thank you so much I was pointing my tool the wrong way
Glad this video helped you out buddy.
Thanks for uploading. Got my wheels redone and swapped out and they have the sensors set on the wrong tire corners. Instead of going back, I just ordered myself the tool. Hopefully its an easy fix and save myself the drive back to the off-road shop to reset it and waste a day off of work to drive out there. Seem pretty simple tool to use. (fingers crossed)
Let me know how it goes. This video is a couple of years old now so these tools must be real cheap now
@@JohnDrivesAnything will do. It is. 12 bucks.
Got the tool today and unit seems to work fine but it only picked up 2 of the 4 sensors. Not sure if the sensors gone bad.
@@LifeOutsideSP Did you make sure to aim the tool right under the valve stem? Your truck is still under 5 years old isnt it so I dont think the sensor batteries should be bad already
So watching your video, you're really saying the dealership didn't do anything wrong.... Since the wheel didn't have a TPMS installed. Got it. Thanks for the info.
They dont recalibrate the sensors and thats how I discovered the spare has no sensor.
Good Video, I have the EL-50448 but it did not come with Instructions or Procedures about it .. Thanks !!
Right on man, glad this helped you out
followed and worked like it should :)
Glad this video helped you out.Can you give it a thumbs up if you haven't already.
I appreciate you stopping by and participating in the comments. It helps my channel a lot.
Ty vm your video was very helpful on show me how to use my relearn tool
Glad I can help you out buddy
Purchase it from JDiag Electronics Technology Co.,Ltd Good TPMS can work on both GM and Ford cars
www.amazon.com/JDiag-EL-50448-Pressure-GM-Ford/dp/B079HG6WCP/ref=sr_1_457?keywords=tpms+sensor&qid=1552978159&s=automotive&sr=1-457
Thank you so much for the video!
Glad my video helped you out!
Great video , thanks 🙏🏻
You're welcome
Great video man 💪🏾 appreciate it
Glad this video helped you out buddy
Just got the tool and tried....... I recently had a back tired replaced at Walmart last Dec and the back 2 sensors had been working, my fronts died last year and last Saturday I had 2 new tires put on and sensors at walmart, but they said their machine needed to be charged up so went back Monday and got hit with the back sensors were not showing up now and the other rear tire needed to be replaced, said dry rot even though it looks almost new. So I just ended up leaving, not really able buy another new tire / mounting / road hazard fees and 2 more sensors. So I' guess all the sensors maybe need to be the same brand in order to relearn...... On my 2009 Impala you use the keyfob and press 2 buttons to start the relearn, it did beep on the 2 new front tires (I guess universal replacements) but no luck on the rears being found / horn beeping. So I'm guessing letting the air out to set may not work either, I've not tried yet. When I got there Monday they said I could sit in the car but they never set up the dash to relearn or have the car on.......... I was going to have them do 2 new sensors but could not really buy another tire at this time since on SS... Thanks
GM wants 65.00 for this tool . Ebay sells them for 10.00 are these tools any good?
I still have it
Have 2008 Chevy Silverado but don’t believe it had screen for tire pressures, so chances are it won’t work then???
Life Hack, use a cheap Bounty Hunter or any metal detector will work and wave it over the tire.
I have an unresponsive sensor
Knowing that it works. What's the solution?
Were you trying to program the spare?
@@JohnDrivesAnything The sensor is now not working and I will replace it
Just picked one of these up. Tires went nuts after swapping the battery.
Se puede hacer en cherokee 2011
Worked on a 2012 Chevrolet Traverse LTZ. Replaced one TPMS sensor using Shrader GM. Vehicle did not read the new sensor. Deflate technique didn't work. The VXDAS EL-50448 worked on the first try.
Cool Glad this video helped you out. Deflating trick didn't work on this truck either.
You can do the same procedure by just deflating the tyre with a pocket screwdriver/key. No need for the fancy tool.
Have you tried it in a 2015 and newer?
Cannot simply deflate tires on a 2011 or later North American vehicle.
Indeed, newer chevrolet models don't accept this trick. Why? In my opinion, to force you go to the dealer or buy the tool.
@@jonatanfelipe1830 That's why I ended up buying this
I can do that procedure on my 2012 Traverse and it works fine. Just have to air the tires back up afterwards.
Does this tool works with Opel wehicles? Opel was part of GM.
Does this work for subaru?
Mine dosnt have a sensor and i have no spare and now all of the numbers are gone am I supposed to go buy a tire or a sensor
SEnsors
You can buy this tool on amazon for $15, but the same exact tool on the GM website is $65. You used to be able to relearn your tpms without a tool, just by letting some air out of each tire. Hey GM, how bout you stop ripping off your customers?
Did not work for my truck it erased all of them now and the one that tire is not reading at all
so you read tire pressure for rear left tire pressure on tire u had inside truck bed and u said u had to take air out of tire because it read 40 PSI?
The spare tire didn't have a sensor so I just read the tire in the bed when it was fixed. Of course I transfered the fixed tire back to where it belonged.
work in a mitsubishi outlander 2009?
If you have oversized tires and wheel forget it. My truck has 37x12.50x20 tires on it and the tool would not reach the sensor.
Whit bmw work?
Great job done
Is it work with Toyota hilux pickup 2019
This company makes a all makes model I believe
@@JohnDrivesAnything thanks for fast reply
What could be the problem when one tire doesn't respond to the tire scanner
Tire most likely doesn't have a sensor. The spare tire in this truck didn't have a sensor ruclips.net/video/W65k-wIzOxA/видео.html
Is this the same sequence for 2015 Chevy Silverado 2500HD please ie would you expect indicators to come on to show you the sequence, note instructions from VXDAS EL-50448 p poor
Does a single head light light up when you attempt to reprogram the sensors?
@@JohnDrivesAnything I have tried it yet as I didnt want to bugger anything up
@@deep8873 I see some silverados can reset the TPMS by letting air out of each tire in a sequence. Hopefully all you need is this tool. they are only $10 now
@@JohnDrivesAnything I have one and will give it a go - appreciate your help
yes
@@JohnDrivesAnything
Are you holding or just tapping the button
Holding
Did not order the monitor?
What do you mean, ZR2? That's a trim of many models. ZR2 isn't a model.
Ok
My tpms tool is not blinking like your ?
Is it reprogramming your tires?
I tried it on a Nissan Frontier and it didn't work. Some people claimed to have done it in Nissan Versa, Altima, and Xterra using the same tool. It didn't work for me.
I think there's a universal tool available. I have a Fiat 500 Abarth and I might by that Universal one just to test it out.
Purchase it from JDiag Electronics Technology Co.,Ltd Good TPMS can work on both GM and Ford cars
www.amazon.com/JDiag-EL-50448-Pressure-GM-Ford/dp/B079HG6WCP/ref=sr_1_457?keywords=tpms+sensor&qid=1552978159&s=automotive&sr=1-457
Will this work when you get an aftermarket wheels and put aftermarket tpms sensor?
My dad got a TPMS from CJ Pony Parts and it worked Here's the video ruclips.net/video/W65k-wIzOxA/видео.html
I replaced a tire with my spare on my ZR2 and the sensor went out I bought the tire sensor reader and did exactly what you did. But it would the sensor light keeps popping back up and have to do the procedure again. Does it happen to you too?
You rotated in your spare?
@@JohnDrivesAnything no I haven't yet
batteries in the TPMS sensors only last so long and you need to replace the sensors.
I have bought another set of tire for snow with Tpms sensors on all 4 tires can this pair my new set?
It should, if your new monitors have TPMS
Purchase it from JDiag Electronics Technology Co.,Ltd Good TPMS can work on both GM and Ford cars
www.amazon.com/JDiag-EL-50448-Pressure-GM-Ford/dp/B079HG6WCP/ref=sr_1_457?keywords=tpms+sensor&qid=1552978159&s=automotive&sr=1-457
Is this reprogramming?
Yes
My toyota corolla doesn't have fancy tire things like this
hate all these electronics. The less electronics the less things to break. I'm getting a newish car at the end of the year and I really hope it doesn't have this many electronics in it.
I bet it has even more
in my Opel 2017 Mokka X manual it says that no spare tires have sensors.
Does your cars rim have matching rims with the non spares? It's nice this truck has a matching rim. I told my dad to get a pressure sensor so he can rotate 5 tires vs 4
@@JohnDrivesAnything no idea what matching rim means. Just know the tyre pressure is 450 kpa in the spare and it has no sensor, and all other have opel sensor and should be 220 according to the info bracket on the passenger side.
By matching rims I mean if the spare looks like all the other tires and not the steelies
That is complete B.S that the spare has no sensor in it for the price you pay for newer vehicles nowadays.
Former GM fan
Yeah kind of lame. I got my dad a sensor for the spare from CJ Pony Parts it was like $40 now he can rotate 5 tires
Reset device $12.95 on Amazon .
I got mine on Ebay
AutomotiveVlog works great n ez
Do this thing work for 2016 nissan sentra?
Not sure does yours require a tool to recalibrate?
How much are these tire pressure device
$10
Didn't work for me on tires 305/35/R24
24's? Sure you even have TPMS sensors in there?
Same here with brand new OEM sensors in each tire on 305/35-24
@@duggla781 - How far did you get? COuld you put it in learn mode? What year car?
Dam I can't get mine to work same unit... what a piece of $h!t. If it didn't have a monitor isn't it gonna show on the dash?
Can I used this device on 2008 Toyota highlander. Thanks
Is a tool require to reprogram the sensors? Theres a univeral tool available.
Thanks so much, is this battery use 9v..?
You're welcome. Yes the rectangle weird looking battery lol
Or the spare TPMS is busted, that's why it didn't work.
There was no TPMS in the spare. Kind of lame. I guess GM wanted to save $50 on every truck and not include it.
Of course there isn’t a monitor in the spare. It’s a spare lol
At least the spare is a nice tire that matches the other ones and not a space saver
Or, your spare has a tpms and the battery is dead
This was when this truck was still new. My dad got the spare checked. There was no TPMS so he got one put in so he can rotate all 5 tires in. He's still on the stock tires 5 years later lol. I think it's time to get new ones!
@@JohnDrivesAnything
I'm pissed because I put 4 new ones in 21/2 years ago and two have died.
Does not work on my 2017 Colorado LT.
Did you ever figure it out.
My truck is tprms working 4 tires beeped horn push monitoring ! GM EL-50448.. Chevrolet Colorado 2016
Just used on my 2017 Colorado LT. Worked perfectly
Really don't need the tool...adding or releasing air in the tire does the same thing
Tried it on this truck it didnt work. It works on older Chevys
@@JohnDrivesAnything - For GM vehicles after 2014 the deflate method does not seem to work.
The always F you at the drive threw.
This is straight up lazy. The Tire Pressure relearn literally takes 2 minutes. I'm pretty sure most dealers don't do the re-learn. I only found out it wasn't done because of a flat.
This is how capitalism treats us.
So you work around it, do research and buy a tool and not give $120 to a tire store.
Capitalism allows you to go research youtube, then buy a cheap reset instrument. Hooray for capitalism.
Let me explain. When I say "capitalism", I'm not proposing the replacement of the system. It's just a complaint about the way the dealer and the manufacturer, and the capitalists as a whole treats the consumer. When they use pratices such as scheduled (forced) obsolescence, or simply when you pay for a service in the tires and they don't reinstall (including re-learn) the TPMS, what is, for me, an obvious procedure. In my country, car services are even worse. Some services, I better do. Not for the money, but for the "lazy" or bad people. Of course it's good when you can buy your own tool and do the job. I said less than I wanted to say in the previous comment. Thank you for the feedback.
@@jonatanfelipe1830 That's why I call Dealerships Stealerships. I say that in a few of my videos.
@@jonatanfelipe1830 Where are you from sir?