Hello Chip, thank you very much for your comment. I understand your concern, but the cable comes off the top of the reel and is quite a ways away from that bolt plus the windings make the diameter of the reel, even when fully wound up, to have quite a bit of clearance. Consider subscribing. Thanks, Joe.
Extreme max products. That is the company that makes the mount. I think I bought it on Amazon or some other source online. Just search for extreme max products and you will find it. Thank you for your nice comment.
@@DavidGuns Good to hear from you again. I have use the Winchester number of occasions. I store my RZR in a steel building so it’s not exposed to the elements so basically it looks as good as new.
Method 1 of 3: When used correctly, a lock washer will hold the nut or other threaded fastener in place. To help it accomplish this, put the lock washer on first, below the fastener. If your project calls for other washers or hardware elements, they should go on before the lock washer so that it can hold them in place.
Hello thank you for your question. Unfortunately I don’t really understand it though and I’m not sure what you’re asking. I hope you’re able to work things out. Take care. Joe
I powered this up using quick connect. I also did a video on RUclips: Winch Quick Connect Install and Wire up RZR w Dr Joe In that video you can find step-by-step instructions how to do it. I didn't have a big wire crimper to crimp the terminals at that time now I do I recommend getting one of those instead of soldering it but soldering works fine as I did in the video. Consider subscribing. Take care Joe
never ever lay a spring washer onto a flat washer. It doesn't make any sense. A spring washer wants to log the position between a bolt and base. If You put a flat washer between, You have no lock betweeen the flat washer and the base. I drove a Yamaha SR 500 . She was throwing bolts on every ride, before I connected spring washers correctly on every bolt she lost.
Yep the flat washer is for under the head of the bolt. There's still a lot of procedure's that call for lock on top of flat, there wrong. NASA did a study on it and they concluded flat washer on bolt head side, split washer only on nut side.
Thanks Dr. Joe. Can you list the mounting hardware specs for the winch and fairlead or does it all come with the product?
Hello laramr1
Yes, fortunately the hardware does come with the winch for the fairlead. Thanks for your comment. Consider subscribing. Take care Joe
Fantastic!
Hey Ben, thanks for your shout out. I’m glad you found it useful. Consider subscribing. Thanks, Joe.
You may have some interference between the cable and the winch mounting bolt on the fairlead side when winching.
Hello Chip, thank you very much for your comment. I understand your concern, but the cable comes off the top of the reel and is quite a ways away from that bolt plus the windings make the diameter of the reel, even when fully wound up, to have quite a bit of clearance. Consider subscribing. Thanks, Joe.
Did you buy thr mounting bracket at harbor freight also, great video thx , I need that setup for my side by side Polaris ranger
Extreme max products. That is the company that makes the mount. I think I bought it on Amazon or some other source online. Just search for extreme max products and you will find it. Thank you for your nice comment.
I purchased it I believe on Amazon from extreme max products it is not a harbor freight mount.
@@JosephHunstad it's been about a year, how is the winch mount holding up ? It might be powder coated.
@@DavidGuns Good to hear from you again. I have use the Winchester number of occasions. I store my RZR in a steel building so it’s not exposed to the elements so basically it looks as good as new.
Method 1 of 3:
When used correctly, a lock washer will hold the nut or other threaded fastener in place. To help it accomplish this, put the lock washer on first, below the fastener. If your project calls for other washers or hardware elements, they should go on before the lock washer so that it can hold them in place.
Damn- that’s a great idea!
Thx bro!
Thank you for your comment. Please consider subscribing. More good content to come take care Joe
Hi, I would like to ask what is the distance between this circular hole? I'm working on this product now, thanks a lot!
Is the distance between the circular holes between the winch mounting plates.
Hello thank you for your question. Unfortunately I don’t really understand it though and I’m not sure what you’re asking. I hope you’re able to work things out. Take care. Joe
How did you power this winch once it was installed?
I powered this up using quick connect. I also did a video on RUclips: Winch Quick Connect Install and Wire up RZR w Dr Joe
In that video you can find step-by-step instructions how to do it. I didn't have a big wire crimper to crimp the terminals at that time now I do I recommend getting one of those instead of soldering it but soldering works fine as I did in the video.
Consider subscribing. Take care Joe
Is this a 24v winch?
This is a 12 V winch. Everything on the Ranger's 12 V. Consider subscribing. Thanks Joe
never ever lay a spring washer onto a flat washer. It doesn't make any sense. A spring washer wants to log the position between a bolt and base. If You put a flat washer between, You have no lock betweeen the flat washer and the base. I drove a Yamaha SR 500 . She was throwing bolts on every ride, before I connected spring washers correctly on every bolt she lost.
Yep the flat washer is for under the head of the bolt. There's still a lot of procedure's that call for lock on top of flat, there wrong. NASA did a study on it and they concluded flat washer on bolt head side, split washer only on nut side.