You sir are what I want to be when I grow up as a model builder!!!!! even though I'm 47 years old LOL your devotion and Fidelity Thunder strikes me!!!!!!!!! and I thought I was a weirdo for working on my 1/16 scale cutaway model of a Newport 28 for 4 years!!! and you've been working on this kit for 9 years!!! I bask in your glory!!! I subscribed to your channel and I hope to learn all of your secrets! I recently learned how to work with aluminum, brass and non-plastic materials, I purchase a soldering gun and I've started to incorporate brass hand formed materials, and learn taught myself how to solder them I'm also learning how to emboss aluminum to make gun blisters and other very complex curved shaped parts.... love your channel keep doing what you're doing and I will just continue to sit and bask in your model building Glory!!!!!!
Hi, Back in the late 60s, I bought the Alfa Romeo kit for $79.00. I had a plastics company that worked on plexiglass, reproduce the crankshaft parts, as the originals cracked when pressed on a brass bearing. The spoke wheels were hell on wheels….but nice looking and quite strong. Twenty plus years later, after moving from Las Vegas, NV, to Texas and from one home to another, I left the car in the attic of the first Texas home……..never went back to try and retrieve it. Live and learn. I liked your work. You must continue and finish the car. Great video. Thank you.
Thanks you so much for the kind words and for subscribing James! If you participate in any modeling forums, please tell your friends about the Full Earth Workshop! Doug
Great model and great job! I have a few kits of the POCHER company, but they are still in boxes, it is difficult to 1/8 car model when you live in a rented apartment.
Time to open one of the boxes and get building! Part of this build was done on a single 3x4 foot table. There are lots of reasons for NOT building Pocher, and that is why so many remain available decades later! Thanks for watching! Doug
"I'm using two brass tubes as an armature to support a commissioned piece. I'm having difficulty figuring out how to connect the tubes in a way that allows for easy disconnection when packaging it up."
Hi. First of all, congratulations on the video. I have a question; since I'm reaching 1/2 century I'd like to build some models from scratch. Where can you recommend me to find some templates of 1930s cars to buy? Thanks.
Congrats on turning 50! Scale drawings of vintage cars are hard to find. Some car makers (Lotus) will sell them, but they are very expensive. I sometimes buy the largest scale model of the subject that I can find, then use the parts to make upscale templates. Thanks for the note! Doug
Time to make someting 5:17 equates to price is wrong. This was a fallacy the early economists fell into. Called the LTV labor theory of value. Ricardo and Smith. Time has nothing to do with it. In short, its scarcity of the product plus demand based on its marginal utility that determines price. If the prices come down at that model builders site, theyll sell more units irregardless of labor. IOW Value Isnt determined by labor but by 'marginal utility' - demand for each incremental unit.
Hi JP! Thanks for the helpful criticism...I think I cut the clips a little short in this one, trying to move quicker, but added in some confusion. I’ll try to slow things down a bit. Great to have you here! All the best, Doug
You sir are what I want to be when I grow up as a model builder!!!!! even though I'm 47 years old LOL your devotion and Fidelity Thunder strikes me!!!!!!!!! and I thought I was a weirdo for working on my 1/16 scale cutaway model of a Newport 28 for 4 years!!! and you've been working on this kit for 9 years!!! I bask in your glory!!! I subscribed to your channel and I hope to learn all of your secrets! I recently learned how to work with aluminum, brass and non-plastic materials, I purchase a soldering gun and I've started to incorporate brass hand formed materials, and learn taught myself how to solder them I'm also learning how to emboss aluminum to make gun blisters and other very complex curved shaped parts.... love your channel keep doing what you're doing and I will just continue to sit and bask in your model building Glory!!!!!!
Wow Pocher - back in the days - not even close to your level of brilliant work. Great to use them as a template - Kudos indeed!!!
Thanks so much!
Hi,
Back in the late 60s, I bought the Alfa Romeo kit for $79.00. I had a plastics company that worked on plexiglass, reproduce the crankshaft parts, as the originals cracked when pressed on a brass bearing. The spoke wheels were hell on wheels….but nice looking and quite strong. Twenty plus years later, after moving from Las Vegas, NV, to Texas and from one home to another, I left the car in the attic of the first Texas home……..never went back to try and retrieve it. Live and learn. I liked your work. You must continue and finish the car. Great video. Thank you.
Thanks for the awesome note! All the best,
Doug
Master craftsman at work Doug!
One of the most impressive works I've seen on this model🤓
Thanks so much! So kind!
Doug
this is insane attention to detail!!! awesome!!
Thank you so much for your kind comment! Doug
Love it. Takes some serious skills to do the brass and soldering work
Actually much easier than it looks! Thanks for hangin out!
Semplicemente FANTASTICA 👍👍👍👍👍
grazie amico mio!
Nice 👍🏽 look forward to seeing this built out.
Thanks Thomas!
Amazing
Thanks JJS!
Wow, that is SUPER cool !!!!
Thanks for stopping by!
Absolutely awesome. Thoroughly enjoyed watching. I think you deserve more subscribers, but even so thankyou for sharing for my benefit and enjoyment.
Thanks you so much for the kind words and for subscribing James! If you participate in any modeling forums, please tell your friends about the Full Earth Workshop!
Doug
Great job and great car!
It is a decade of fun! Thanks for the note!
Doug
Great model and great job! I have a few kits of the POCHER company, but they are still in boxes, it is difficult to 1/8 car model when you live in a rented apartment.
Time to open one of the boxes and get building! Part of this build was done on a single 3x4 foot table. There are lots of reasons for NOT building Pocher, and that is why so many remain available decades later! Thanks for watching! Doug
9:13 I'm intrigued to see how the compound curves on that boat tail will be formed.
Hi Arthur! I usually make these curves with a ball peen hammer on the non facing side. That is how I made the oil cooler.
Thanks for watching!
Doug
@@FullEarthWorkshop
Thanks for taking the time to reply, Frank.
Your skill and level of modeling is unattainable to most of us. Pleasure to watch.
A labour of love. A hint : hold part still, then talk about it. It's very difficult to follow with your currant presentation. Wonderful work, 😊
Thanks so much for watching…even though it’s jiggly! All the best!
Doug
"I'm using two brass tubes as an armature to support a commissioned piece. I'm having difficulty figuring out how to connect the tubes in a way that allows for easy disconnection when packaging it up."
Hi. First of all, congratulations on the video. I have a question; since I'm reaching 1/2 century I'd like to build some models from scratch. Where can you recommend me to find some templates of 1930s cars to buy? Thanks.
Congrats on turning 50! Scale drawings of vintage cars are hard to find. Some car makers (Lotus) will sell them, but they are very expensive. I sometimes buy the largest scale model of the subject that I can find, then use the parts to make upscale templates. Thanks for the note! Doug
@@FullEarthWorkshop Thanks. I'll follow your example.
Time to make someting 5:17 equates to price is wrong. This was a fallacy the early economists fell into. Called the LTV labor theory of value. Ricardo and Smith. Time has nothing to do with it. In short, its scarcity of the product plus demand based on its marginal utility that determines price. If the prices come down at that model builders site, theyll sell more units irregardless of labor. IOW Value
Isnt determined by labor but by 'marginal utility' - demand for each incremental unit.
PLEASE, put the parts down, stop moving them around, that defeats the intent of seeing in detail what you have done.
Hi JP! Thanks for the helpful criticism...I think I cut the clips a little short in this one, trying to move quicker, but added in some confusion. I’ll try to slow things down a bit. Great to have you here! All the best, Doug