Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
This video demonstrates the sound with the dB reducers removed, not the baffles as they’re still inside
I got the screws out, but the end cap seems stuck. do I need ore elbow grease?
From what I was told removing them changes the back pressure and could damage the motor
It won’t as long as you don’t change the factory air cleaner. If you do then you must tune it.
did you try removing the baffle assembly inside each pipe?
No
Are those slip-ons with or without "cats" I wander, the S&S slip-ons I was checking out are the slash cut version.
With cats.
50 state
Did you have to install oxygen sensors emulators (since the oem mufflers have O2 sensors, at least in Europe)?
This was in America. No secondary O2 sensors.
Why does revzilla and J&P cycles say this does not fit my 2024 Lowrider ST?
@@mikeestevez5047 probably lack of heat shields, they don’t want to be responsible if you melt your bags.
Is the top slip on a little off line because you have the passenger slider on there? Mine is so I asked.
No i didnt have any clearence issues.
How do they sound without baffles
Did you notice any difference in power/performance after the baffles were removed?
I decided to remove the baffles and ride today and I really didn't notice any difference. I have a 2019 FXLR with a 107 Stage 2 with Zippers 468 tuned using an FP3.
Difference in performance that is. In sound it increased the sound for sure and sounded fantastic!
No I didn’t glad you are enjoying the mod!!
ruclips.net/video/KjKUKhHQLHg/видео.html
any video of them removed ?
Was there a flash/ tune necessary.
Nope
will this fit my 2016 fatboy ? i like the style and the sound
These are for the Milwaukee 8, not for the TwinCam. Check their website, they may have them for your bike.
Can’t get it out with me T30 security bit. Any other suggestions
I had to hammer the 30 in to make it work.
It's a 5/32 security bit. Not a torx. You can get them from Home Depot in the Klein security bit set. $30
This video demonstrates the sound with the dB reducers removed, not the baffles as they’re still inside
I got the screws out, but the end cap seems stuck. do I need ore elbow grease?
From what I was told removing them changes the back pressure and could damage the motor
It won’t as long as you don’t change the factory air cleaner. If you do then you must tune it.
did you try removing the baffle assembly inside each pipe?
No
Are those slip-ons with or without "cats" I wander, the S&S slip-ons I was checking out are the slash cut version.
With cats.
50 state
Did you have to install oxygen sensors emulators (since the oem mufflers have O2 sensors, at least in Europe)?
This was in America. No secondary O2 sensors.
Why does revzilla and J&P cycles say this does not fit my 2024 Lowrider ST?
@@mikeestevez5047 probably lack of heat shields, they don’t want to be responsible if you melt your bags.
Is the top slip on a little off line because you have the passenger slider on there? Mine is so I asked.
No i didnt have any clearence issues.
How do they sound without baffles
Did you notice any difference in power/performance after the baffles were removed?
I decided to remove the baffles and ride today and I really didn't notice any difference. I have a 2019 FXLR with a 107 Stage 2 with Zippers 468 tuned using an FP3.
Difference in performance that is. In sound it increased the sound for sure and sounded fantastic!
No I didn’t glad you are enjoying the mod!!
ruclips.net/video/KjKUKhHQLHg/видео.html
any video of them removed ?
Was there a flash/ tune necessary.
Nope
will this fit my 2016 fatboy ? i like the style and the sound
These are for the Milwaukee 8, not for the TwinCam. Check their website, they may have them for your bike.
Can’t get it out with me T30 security bit. Any other suggestions
I had to hammer the 30 in to make it work.
It's a 5/32 security bit. Not a torx. You can get them from Home Depot in the Klein security bit set. $30