@@rileykairc Glad to hear. I really like it for my crawlers. Now if you plan to do mainly trailing, then 25% overdrive might be too much, and I would recommend going down to 11.83% or keeping at stock 5.7%. But for crawlers, this is the way to go...just my personal opinion.
@@BigSungHobbies I am just keeping it for crawling I have other crawlers for training I use and I have a trailer to put my gatekeeper on to tow to the rocks
I run no overdrive in my stock chassis lcg trx4 and it climbs like if it had overdrive its pretty weird but awesome at the same time im shure if i add over and under it will yust latch on to rocks like crazy awesome vids homie 💯💯
I am out of town, but here’s hiw you can search for it. Google search for team knk hardware. Once at the site, search for element overdrive and it should bring it up.
Technically that's not overdrive by itself. Overdrive by itself is when you gear up till lost of max power, to gain efficiency in energy. What you have is "front-overdrive" (which a rockcraler is never truly in overdrive just less underdrive - but it's called front-overdrive to keep it simple)... The main reason I'm pointing this out - Is (rare but) some RC setups (usually when you need more rotating on power) will run rear-overdrive.
Technically, you are correct. The correct term for Element transmission is underdrive as the rear axle spins slower than front axle. That being said if you rotate the wheels, the front wheel will have more rotation than the rear wheels thus mimicking front overdrive. One reason why vendors like Team KNK Hardware calls their gear overdrive gears.
@@BigSungHobbies but see the problem is not the technicality (it could just be me for i run OD in many different ways on many car types and bit lower knowledge on crawlers) - it's your title... if you read it - I would presume you're adding equal wheel speed for you did not indicate front. my next guess would be front OD, and a small chance of rear OD (really small chance in a crawler - still would be a good compare video). I had to watch the video and was like Oh! also on my end, i thought it was a performance difference/compare video (just skimming keywords, looking at the video preview, and your past videos) so i doubled lost heading into your video 🤣😂🤣... keep up the good work!!!
It could be that you are coming from different car types. For crawlers, it's pretty much understood to say Overdrive to mean that the front wheels are rotating at faster rate than rear wheels, so there is no need to mention that. Additionally, Element axles do not have over/underdrive gear options. The overdrive is achieved via the transmission. You can find more detail on the Overdrive Gears from Team KnK Hardware website. It is marketed as 25% Overdrive, and the description clearly says, "Installing these gears will underdrive your rear output on the transmission therefore creating a 25% overdrive in the truck. This allows the torque and gear ratio to remain the same on the front axle." If you run a tire rotation test, then you can clearly see that the front is being overdriven (in our case via reduction on the rear). If there is 0% overdrive, then front wheels will rotate the same amount as rear wheels. For example, if the front wheel spins 10 times, then rear will spin 10 times. With the Overdrive Gears (where it is technically underdriving the rear) installed, if the front wheels spins around 10 times, then the rear wheels will spin 7.5 rotations in the same timeframe. I have done videos that compare 5.83% vs. 11.83% overdrive gears. For crawlers, you want the front wheel to spin faster than the rear so that it can help with traction. At some point, there is negative return; therefore, as for how much overdrive, that's another story. teamknkhardware.com/overdrive-gears/1445-element-25-overdrive-gears.html
You have the most instructive, easiest to follow videos. Thank you so much.
Thank you so very much for the comment! I greatly appreciate it.
Nice video!
I went past 25% also with some creative grinding to the trans case. :)
👍
thinking of grabbing a ecto soon thanks for the info on upgrading.
Anytime!
Great video
Thanks for the visit
Complimenti! Ottimo lavoro.
Grazie mille!
Once again great job.
Bruce
Thanks again and I appreciate the comment!
Another great video thanks for sharing 👍🏻
Thanks 👍
I run the 25% over driver in my gatekeeper it really does help
Yup, for my style of driving 25% overdrive works really well.
@@BigSungHobbies I put it in before I finished building the kit I didn't know what to expect but I love it it works really well for me to
@@rileykairc Glad to hear. I really like it for my crawlers. Now if you plan to do mainly trailing, then 25% overdrive might be too much, and I would recommend going down to 11.83% or keeping at stock 5.7%. But for crawlers, this is the way to go...just my personal opinion.
@@BigSungHobbies I am just keeping it for crawling I have other crawlers for training I use and I have a trailer to put my gatekeeper on to tow to the rocks
Sweet.
I run no overdrive in my stock chassis lcg trx4 and it climbs like if it had overdrive its pretty weird but awesome at the same time im shure if i add over and under it will yust latch on to rocks like crazy awesome vids homie 💯💯
I ran no overdrive on my TRX4 Sport and it climbed great. But at times, I wished it had over and under for crazy steep climbs.
@@BigSungHobbies down here in texas there is alot of boulders we crawl and if there good enough we make a lil comp on the weekend for fun
@@houstonrccrawlers6445 That sounds like fun!
Work on the HD as well i take it? Great vid as always.
Yes, definitely! All Element Enduro uses Stealth-X trans and this works perfectly for it.
@@BigSungHobbies Just ordered!
@@jamescinadr243 Awesome, I think you will like the change.
What's the part number on them. I want to make sure I get the right ones. I'm new to crawling and just got my Ecto. Thank you
I am out of town, but here’s hiw you can search for it. Google search for team knk hardware. Once at the site, search for element overdrive and it should bring it up.
@Bryan Allen. The part number is KNKEE5624. Here's the direct link teamknkhardware.com/overdrive-gears/1445-element-25-overdrive-gears.html
@BigSung Hobbies thank you
Those look just like the Hot Racing UD2 gears
They are basically the same.
Technically that's not overdrive by itself. Overdrive by itself is when you gear up till lost of max power, to gain efficiency in energy. What you have is "front-overdrive" (which a rockcraler is never truly in overdrive just less underdrive - but it's called front-overdrive to keep it simple)... The main reason I'm pointing this out - Is (rare but) some RC setups (usually when you need more rotating on power) will run rear-overdrive.
Technically, you are correct. The correct term for Element transmission is underdrive as the rear axle spins slower than front axle. That being said if you rotate the wheels, the front wheel will have more rotation than the rear wheels thus mimicking front overdrive. One reason why vendors like Team KNK Hardware calls their gear overdrive gears.
@@BigSungHobbies but see the problem is not the technicality (it could just be me for i run OD in many different ways on many car types and bit lower knowledge on crawlers) - it's your title... if you read it - I would presume you're adding equal wheel speed for you did not indicate front. my next guess would be front OD, and a small chance of rear OD (really small chance in a crawler - still would be a good compare video). I had to watch the video and was like Oh!
also on my end, i thought it was a performance difference/compare video (just skimming keywords, looking at the video preview, and your past videos) so i doubled lost heading into your video 🤣😂🤣... keep up the good work!!!
It could be that you are coming from different car types. For crawlers, it's pretty much understood to say Overdrive to mean that the front wheels are rotating at faster rate than rear wheels, so there is no need to mention that. Additionally, Element axles do not have over/underdrive gear options. The overdrive is achieved via the transmission. You can find more detail on the Overdrive Gears from Team KnK Hardware website. It is marketed as 25% Overdrive, and the description clearly says, "Installing these gears will underdrive your rear output on the transmission therefore creating a 25% overdrive in the truck. This allows the torque and gear ratio to remain the same on the front axle." If you run a tire rotation test, then you can clearly see that the front is being overdriven (in our case via reduction on the rear). If there is 0% overdrive, then front wheels will rotate the same amount as rear wheels. For example, if the front wheel spins 10 times, then rear will spin 10 times. With the Overdrive Gears (where it is technically underdriving the rear) installed, if the front wheels spins around 10 times, then the rear wheels will spin 7.5 rotations in the same timeframe. I have done videos that compare 5.83% vs. 11.83% overdrive gears. For crawlers, you want the front wheel to spin faster than the rear so that it can help with traction. At some point, there is negative return; therefore, as for how much overdrive, that's another story. teamknkhardware.com/overdrive-gears/1445-element-25-overdrive-gears.html
I already installed the factrory 11% od, would this bring me to 36% ?
No it will not. You will be replacing the factory 11% OD gears with 25% OD gears.
@@BigSungHobbies Thanks
Need thows for my Enduro V2 kit
Definitely...that 25% OD really completes the Stealth-X trans in my opinion!
Che tipo di grasso hai usato?
Uso grasso marino o grasso per auto ad alta temperatura
No link for the overdrive gears?
I will add it later when I am back in front of computer. You can search for “Team KNK Hardware Element Overdrive“ as well.