Thanks Dan for all the videos they help out a lot of guy's and they will help out future Moline enthusiasts forever long after we are gone the videos live on forever!!!
I have the same hammer as you. I found it in an alley in Bukburnett, Texas 10 years ago. It is the 3rd one of them I have owned. I find them and lose them but I have never bought one. Estwing makes the best tools.
Man I know where there's a tractor just like the one that you are working on down here in south Alabama in a yard with bushes growing up in it they say it had a bad water pump and they parked it in the front yard and that's where it is today been there for at least 25 years I tried to buy it 10 years ago and they would not even talk to me about and I know of a few people trying to buy it with no luck.God Bless Y'all and have a great day 😊😊😊
Nice job Dan , curious about the spacer you called out from the parts list, and I would have put a thin coat of sealant on that shim to prevent oil weeps like you did the outer ring of the seal and stoned the flanges to be sure of no high spots seens there is no gasket 🤔
Dan,thanks for the vid,I learned how to like prairie gold,I messed with my 302 the day,got it started,got it up to temp,then drained the water out,put my anti freeze back in,my bottom hose I replaced,did that then started it again,I installed the Pretronix ignition,it sounds ok,see ya later.
Thanks Dan for all the videos they help out a lot of guy's and they will help out future Moline enthusiasts forever long after we are gone the videos live on forever!!!
Thanks Russ!
More progress is always good.
Great video Dan. I’m glad you replaced the axle seals. I’m excited for the next one. Thanks
Thanks Dan for the video
I have the same hammer as you. I found it in an alley in Bukburnett, Texas 10 years ago. It is the 3rd one of them I have owned. I find them and lose them but I have never bought one. Estwing makes the best tools.
Man I know where there's a tractor just like the one that you are working on down here in south Alabama in a yard with bushes growing up in it they say it had a bad water pump and they parked it in the front yard and that's where it is today been there for at least 25 years I tried to buy it 10 years ago and they would not even talk to me about and I know of a few people trying to buy it with no luck.God Bless Y'all and have a great day 😊😊😊
👍
Nice job Dan , curious about the spacer you called out from the parts list, and I would have put a thin coat of sealant on that shim to prevent oil weeps like you did the outer ring of the seal and stoned the flanges to be sure of no high spots seens there is no gasket 🤔
Dan,thanks for the vid,I learned how to like prairie gold,I messed with my 302 the day,got it started,got it up to temp,then drained the water out,put my anti freeze back in,my bottom hose I replaced,did that then started it again,I installed the Pretronix ignition,it sounds ok,see ya later.
I think the torque spec on the hubs is Gooden-tight. If ya know ya know! 😎
Those nuts were pretty tight
Is that not a telescopic handle on your new ratchet, them hub bolts would have been easier
Where's that spacer go
Hi dan. U talk weldon on parts i have ztu i gask seal
Can tell where are . I like your video i have learned mm tractor
Don
36/39/34 thought you were saying a women's measurements. lol