Fiat 500 Classic - Part 7 - Front spindles restoration
HTML-код
- Опубликовано: 15 июн 2021
- Rebuilt the spindles for the little Fiat. They were modified to use larger bushings, so I took them to a machine shop to fit new steel bushings that can house the original brass ones. The parts were sandblasted and painted.
Music from Tunetank.com
RocknStock - Dynamic Power (Copyright Free Music)
Download free httpstunetank.comt1fv81885-dynamic-power 
Авто/Мото
.. nice 🐶
How did you get the kingpin out of this assembly?
There's a safety pin installed in the knuckle, you can see me hammer it in at the end. You need to remove that and then hammer the king pin out.
@@AircooledProject I got that safety pin out but the kingpin must really be stuck. I may need a sledgehammer to dislodge it, lol. Could it be that hard to drive out, in your opinion?
I don't have much experience with this. I only rebuilt this set, and the pin was pretty easy to get out. I guess if the car sat for a long time and there's lots of rust, it could get stuck. Try heating the outside of the knuckle.
@@AircooledProject will do. Thanks for your help and quick replies. Much appreciated.
No problem. Good luck with your project!