@@abenzenjoyment3183 depends where you are and what company, where I'm at they make 34 hr and 100 perdiem every day, but work 6 days out of the week 10 hour shifts, 20 hours OT plus 600 perdiem for the 6 days.
1988/89 l done my Pipe Fabricator trade test...back then no you tube! So this is a great help for rookies🙂. I gave it up in 1994 went back to Technical college. Now l work in a design office as a Piping and Layout Draughtsman,Generating Piping General Arrangements,P&IDs,Isometric drawings etc. I still started on the Drawing board,now l work with AutoCAD. Better €$£ 💘😎
Excellent video, all these techniques I used, so I know you definitely know what you're doing. Also this video shows how important it is to have a great fitter and welder relationship
Bro you guys are very professional, especially Marvin he speaks very well and explains in detail. I am a metal fabricator but planning on moving forward and learning new things, I recently applied for a position of pipe fitter helper, it would be an honor and great learning experience if I ever work with people like you guys, thanks for the video.
Straight out of welding school, passed my first bend test and was offered a 1st Welder position. I've got 1 week to cram before my first day on the job. This video has got me pumped to work with fitters and start welding like Victor.
Absolutely the best proper training I have seen yet, even the level compensation teaching is something no one, and I mean NO ONE takes time to do. I'm SUBSCRIBED!
Field welders are good in every position angle and weld in many bad uncomfortable areas where as shop welders either weld in jack stands or use a roller lol which takes alot less skill
Hi guys! Greetings from Russia! I'm the one of thoses who makes these ISOs and I'm exited of looking you doing your job. Could not stop watching. Always interesting in shop and field activities. You doing great job! Thanx
I'm a class 1 welder in the UK and pipe fitter. The way you fab this is so much more detailed than what we would do. I've never used a square to level a bend for instance 🤣 (we just level the face of the bend to the pipe) bit I like the square technique.
Currently learning how to fit pipe, the more I learn and practice, the more Im loving it. My instructors make us fit pipe and also tack it, learning from these old timers who have been fitting for 25+ years is something else.
@@JavierAldoMacedo He says he has 10 years experience. Where I come from it looks like about a week and he doesn’t do it right. He also said flanges weld up to another piece of pipe🤣😂🥲
Pro tip to find the take off for a long radius 90 if you don’t know already. Multiply your pipe diameter by 1.5. I’d recommend getting a pipe trade pro calculator as well. That thing has so many different functions on it.
Something is better than nothing, Thanks to the guys who share their experience and knowledge. Remember technology is always getting advance day by day.
Jackson yea,you know what I hate is when I'm laying something out using the one inch Mark and make my part of parts forgetting to drop and inch. Done that a few times for sure
He tacked the flange on the inside, should have been the outside ... no roll out welds? and it’s a raised face not razorfaced . They bolt up ,they aren’t “welded “ to pumps or other flanges .
That pipe fighter would have to weld too . He'd work a welder like dumbass Victor to death. My grandma could fit better than that she was blind in one eye and couldn't see how the other
thank you guys for putting these vids up its really helped an inspiring pipe fitter to understand the basics and helpfull tips for the feild or fab shop
@@frankie9660 I noticed that too. And who builds carbon steel pipe assemblies with Tig? Ain't nobody got time for that. Bro needs to bust out with some .045 fluxcore. lol
Awesome video I'm 2 months in on Pipe fitting/tac welding I do both here in Alberta, Canada 🇨🇦 than after I check the overall I send the pipe to the welder. I'm learning on the job plus RUclips and Tic tok
You are good at teaching my friend,so I want to learn and increase my knowledge as a pipe fitter,i learned a lot from your vlog and I'm also your subscriber from #🇵🇭
I just want to thank you as well as the other instructors in these videos for what you all are doing and helping someone with a very rusty memory like mine who has been away from pipe fitting and the plant and refinery life. It's been 3 years since I've done that type of work because I've been doing Active Duty missions as a Reservist the whole time and shifted my focus. If I don't get selected for another Active Duty mission next go round, I'll be back doing that this type of work. So....I will definitely be watching more of y'all's training videos and taking notes and preparing. Again it's definitely appreciated!
Where I'm from the welders are the fitters ,it's good to learn to fit . Other welders come here and they are used to the fitters tacking everything up for them,they don't always make it.
I’m a fitter and one of my good friends is my foreman a lot on jobs and when we got to a town we were working in last year we were kinda drunk cleaning out our toolboxes, and decided to check the level on all the stair rails and handrails, the floor of the hotel bedroom, inside cabinetry, walls ect! Lmao! Upstairs and downstairs bedrooms floors all were almost a whole bubble out slipping down to the door to go outside the motel. Our only hypothesis was that it did that if a sprinkler in the room went off because of fire, water would flow right out the door to outside (motel) instead of sitting still on bedroom floor and destroying floor beneath it or downstairs the walls around the room if it wasn’t sloped. Our drunk asses really thought we figured out some coool ass engineering shit that night all proud of ourselves! 🤦🏻♀️
At 7:24, you have really have to make sure that the long side of the square on the left is on contact with both walls of the elbow, otherwise, it doesn't give you any information (everything will always be square if there is no contact). Just like two points are always aligned, and three points are always co-planar
Great video!!! I can tig-stick-fcaw pipe etc but I can't fit worth a damn!! I'm trying to get into an apprenticeship just to learn how to do this. thanks for sharing guys
I don't know if its a loss in translation, but its called "Raised Face" flange not Razor face. As in, there is a "raised" ring around the inside, as opposed to a "Flat Face" flange. The difference is that on things like pumps, strainers, valves, etc that are cast or made of a soft metal, the torque from bolts and the 1/4" gap on a raised face flange joint would bend and deform the flange, so flat faced flanges solve that problem. The reason why every flange isn't flat faced though is that raised face flanges focus the torque on the bolts to the gasket area of the flange, ensuring a tighter seal.
I mean this is a good video but the easiest way to fit a 90 is definitely tacking the sides first and then squaring it but i guess it’s all preference. Love the videos!
7 Steps to help and also be more efficient: 1. Get a good pipe fitters book. The UA has a good blue book, the black pipe fitters and welders handbook by (Thomas Franklin) and the red pipe fitters book IPT's Pipe Trades Handbook by (Robert A. Lee) are great ones to have in your toolbag/box. A great investment that will last a lifetime 2. Get a welding rod and bend the spool or section of spool to build as a reference. Helps visualize the direction of 90s and offsets. 3. If possible build in sections and roll-out as much as possible. Alot faster and easier. You also eliminate the chance of busting out. You also reduce your in position welding to a minimum. 4. Use angle iron or channel and chain clamps for lining up 90s, flanges, reducers, pipe to pipe, etc (90% of the time the high/low will be spot on. If not then you can fit like they are and spit the difference. 5. If you can make a 90 degree jig/fixture for using chain clamps. I have a unistrut jig for 2", 3" channel for 3-4" pipe. Have the channel scribed so I know where the 90 needs to sit. 6. Using a long straight edge (4') vs a square helps on long runs to ensure it is square. 7. Keeping a variety of spacing shims and a wedge in you toolbag to help square. A sawzall blade (1/16"-5/64") works great for 2" pipe, V welding rod for 1/8"-5/32" gap.
@@jenniferasbury8556 I personally am an oilfield pipe fitter (non-union), but have work with/along UA pipe fitters from time to time. The one UA in NM is 412 but when I worked in CA I worked with alot of apprentices that were my helpers out of the 114. Thats where I was shown the UA book. I learned from the Thomas Franklin black book, Spears Blue Book, and Nation Pipe Trades (NPT) red book.
I have always put on uniform lands and always fit high low to top of land . you can not fit to O.D. of pipe to O.D. of fitting because a lot of times fittings will not be the same O.D. as the pipe or maybe other fittings . Uniformity of land is key . In a production shop one would fit to roll out welds . You want to weld as few welds in position as possible . A good fitter and welder can make magic in a day
Dat is awesome. Thanks, where I've been working companies now want a person to do 4 jobs n one. Like fabrication, fit, weld, and bolt up. Just 1dering if can do it by ur self
21:33 you say the measurements out loud but end up tacking the wrong side. Point being other 2 guys also heard the same information and didn't correct you, it's a good lesson for apprentices/ helpers/ welders to actively be helping and not go on auto pilot and just go with whatever it is the lead man says and to speak up when you think a mistake is made or you have a question. Also I'm not trying to give you shit cause we all fuck up but more for helpers to pay attention and have our backs. Keep up the good work
They were doing a good job showing how to read and lay out a run. They did not show having to grind out the tack at 21.33 if they did not catch their mistake before tacking it. You are right it should have been tacked on the other side first. Some welder and fitter that work shut downs at oil refineries travel in pairs because they know how to work together to get the work done. The powers to be at a oil refinery I worked at for 32 years decided to cut the fitters pay to save money. One welder/fitter team that worked our S/D for maybe 12 years along with other welder/fitters teams did not show up for the S/D. The S/D ran long and the powers to be could not understand why it ran long because of the piping crews fell behind??????? Good pipe welding and fitting teams can always find work, you don't screw with one or the others pay and expect to get production. Bean counters are a dime a dozen, always trying to cut someone else pay to make them look good. Then they decided to cut the pipe welders pay also. Then the shit really hit the fan, pipe welders that could not go without busting weld x-rays that meant we had to go back and x-ray every weld they made on the S/D plus clearing all workers out of the x-ray shots areas. we went from working two 12 hour shifts for everyone to working two 10 hour shifts to get all the extra x-rays in. You get what you pay for. Just glad I am retired now and don't have to answer to bean counters!!!
Yo quiero hacer eso, está bien rifadote, me gusta mucho la soldadura y estoy aprendiendo en la herrería de mi papá,. Sus videos me inspiran para seguir y estudiar eso jaja salu2
Why do they make you do so much math in school for pipefitting this video was just pretty much tape measuring, and leveling nice vid it gave me a lot of insight on pipefitting
Really good to watch these bro for sure. I been fitting 7 plus years and watched this whole video among others today trying to find some more advanced ones just to knock the rust off because of COVID I been out on f trade as a fitter working other jobs the past year. However, these are amazing to watch but if you never fit pipe before, basically first thing you need to do is work as a helper for a hood solid year with a pipe fitter (hopefully a really good one at that too) one who will teach you everything you need to know basics and advanced as long as you show awesome effort, good attitude, and want to learn how! And bring him a personal lb of Barbacoa on fridays with tortillas for breakfast if ya working in Texas as appreciation! 🤪😂🤤🤤
Seriously, in the time that you have explained it, I have assembled many pieces and without so much nonsense, I have been working as a boilermaker for 30 years.
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
👇WeldTube Store👇
www.weldlife.com
I've been a wood worker for 40 years and just came across your channel. This is like discovering a new planet for me. Really well done. Much respect.
Hi man. People assume pipe fitting is easy. Mostly it's confused with plumbing
Great video and very informative. As a retired pipefitter and Welder of 28yrs hats off to you guys.
Please do more pipe fabrication and fitting videos. Its really helpful for me.
It's a good refresher if you don't do much of this at work.
How much money can a pipe fitter earn
@@abenzenjoyment3183 depends where you are and what company, where I'm at they make 34 hr and 100 perdiem every day, but work 6 days out of the week 10 hour shifts, 20 hours OT plus 600 perdiem for the 6 days.
@@Ctrl-Alt-Elite YES
Totally awesome fit up..... More please.
1988/89 l done my Pipe Fabricator trade test...back then no you tube!
So this is a great help for rookies🙂.
I gave it up in 1994 went back to Technical college.
Now l work in a design office as a Piping and Layout Draughtsman,Generating Piping General Arrangements,P&IDs,Isometric drawings etc.
I still started on the Drawing board,now l work with AutoCAD. Better €$£ 💘😎
Excellent video, all these techniques I used, so I know you definitely know what you're doing. Also this video shows how important it is to have a great fitter and welder relationship
Bro you guys are very professional, especially Marvin he speaks very well and explains in detail. I am a metal fabricator but planning on moving forward and learning new things, I recently applied for a position of pipe fitter helper, it would be an honor and great learning experience if I ever work with people like you guys, thanks for the video.
They probably are nothing like that in real life honestly i know theyre not based off every welder and fitter ive worked with being in the union
Straight out of welding school, passed my first bend test and was offered a 1st Welder position. I've got 1 week to cram before my first day on the job. This video has got me pumped to work with fitters and start welding like Victor.
Absolutely the best proper training I have seen yet, even the level compensation teaching is something no one, and I mean NO ONE takes time to do. I'm SUBSCRIBED!
That fitter needs to go back to school
This is Kimchi Welder who is uploading welding video in Canada. The pipe fitting video you uploaded is very helpful. Thank you.
👏👏
I'm not a pipe welder/fitter just a shop/field welder but this is the best group of people on RUclips period! I look forward to every new video.
A shop / field welder? Lol where im from those are 2 polar opposites
Field welders are good in every position angle and weld in many bad uncomfortable areas where as shop welders either weld in jack stands or use a roller lol which takes alot less skill
Hi guys! Greetings from Russia! I'm the one of thoses who makes these ISOs and I'm exited of looking you doing your job. Could not stop watching. Always interesting in shop and field activities. You doing great job! Thanx
I'm a class 1 welder in the UK and pipe fitter. The way you fab this is so much more detailed than what we would do. I've never used a square to level a bend for instance 🤣 (we just level the face of the bend to the pipe) bit I like the square technique.
@Will Swift in the UK?
Heck yeah, this videos right here is what y’all need to upload. So much knowledge that it make pipe fitting wayyyy more interesting.
Currently learning how to fit pipe, the more I learn and practice, the more Im loving it. My instructors make us fit pipe and also tack it, learning from these old timers who have been fitting for 25+ years is something else.
Hell yeah! Having a good pipefitter makes all the difference on site. Especially for in-position welds 🤘🏻
Lol yes in the real world most welders wouldn't want to work with this guy
Damn bro I wouldn’t be bragging this guy kind of sucks by how he got the first 90 I saw he didn’t know what he was doing.
@@JavierAldoMacedo He says he has 10 years experience. Where I come from it looks like about a week and he doesn’t do it right. He also said flanges weld up to another piece of pipe🤣😂🥲
@@BDE360 exactly I wouldn’t wanna work with a fitter like that if i was the welder
Im a welder but it's good to know this stuff for real helps me a shit ton and the fitter.
It's funny how this video came out today cause I'm learning pipefitting now and was looking all over the place yesterday for this information
Pro tip to find the take off for a long radius 90 if you don’t know already. Multiply your pipe diameter by 1.5. I’d recommend getting a pipe trade pro calculator as well. That thing has so many different functions on it.
this is where your browser coockies kick in.
Something is better than nothing, Thanks to the guys who share their experience and knowledge. Remember technology is always getting advance day by day.
Knowledge is power..make batagor so easy😂
Nicely done. Knowing your welder certainly helps.
That last tac at 7 " shoulder tacked on other side. But very good job and info on pipe work. Thanks
lol I was just thinkin that
Yeah I seen that also
Jackson yea,you know what I hate is when I'm laying something out using the one inch Mark and make my part of parts forgetting to drop and inch. Done that a few times for sure
His welder should have called him out happens to the best of fitters
i think bro is kinda nervous being on camera and all haha
awesome job. i wish i was a little younger, and able to move like i used to. but i can still watch the videos.
I love pipe fitting...a very logical process. Great video!
He tacked the flange on the inside, should have been the outside ... no roll out welds? and it’s a raised face not razorfaced . They bolt up ,they aren’t “welded “ to pumps or other flanges .
That pipe fighter would have to weld too . He'd work a welder like dumbass Victor to death. My grandma could fit better than that she was blind in one eye and couldn't see how the other
Thank you Anthony Davis for this excellent video demonstration
thank you guys for putting these vids up its really helped an inspiring pipe fitter to understand the basics and helpfull tips for the feild or fab shop
You are like car builders or notorcycles builders you love your work so i like yours content best regards
Best video for basic pipe fitting I've seen! Well done guys!
Except for the fact he thinks it’s a razor face, and how he has his welder tack the wrong side of the flange…
@@frankie9660 I noticed that too. And who builds carbon steel pipe assemblies with Tig? Ain't nobody got time for that. Bro needs to bust out with some .045 fluxcore. lol
Awesome video I'm 2 months in on Pipe fitting/tac welding I do both here in Alberta, Canada 🇨🇦 than after I check the overall I send the pipe to the welder. I'm learning on the job plus RUclips and Tic tok
You teached me really something useful for my career
Very good, especially that you showed it with the map, it was great, thank you
Very nice presentation I've learned a lot keep on posting brother good job
You are good at teaching my friend,so I want to learn and increase my knowledge as a pipe fitter,i learned a lot from your vlog and I'm also your subscriber from #🇵🇭
Man you’re good bro and so good with explanations. Thank you so much
I appreciate the thoroughness
I just want to thank you as well as the other instructors in these videos for what you all are doing and helping someone with a very rusty memory like mine who has been away from pipe fitting and the plant and refinery life. It's been 3 years since I've done that type of work because I've been doing Active Duty missions as a Reservist the whole time and shifted my focus. If I don't get selected for another Active Duty mission next go round, I'll be back doing that this type of work. So....I will definitely be watching more of y'all's training videos and taking notes and preparing. Again it's definitely appreciated!
Where I'm from the welders are the fitters ,it's good to learn to fit .
Other welders come here and they are used to the fitters tacking everything up for them,they don't always make it.
Nice job!
Thanks for this step by step video. Loved the methodology
After watching this I just bought a level and now I'm double checking everything. Now my tables square with the wall and leveled.
I’m a fitter and one of my good friends is my foreman a lot on jobs and when we got to a town we were working in last year we were kinda drunk cleaning out our toolboxes, and decided to check the level on all the stair rails and handrails, the floor of the hotel bedroom, inside cabinetry, walls ect! Lmao! Upstairs and downstairs bedrooms floors all were almost a whole bubble out slipping down to the door to go outside the motel. Our only hypothesis was that it did that if a sprinkler in the room went off because of fire, water would flow right out the door to outside (motel) instead of sitting still on bedroom floor and destroying floor beneath it or downstairs the walls around the room if it wasn’t sloped. Our drunk asses really thought we figured out some coool ass engineering shit that night all proud of ourselves! 🤦🏻♀️
Great knowledge shared your jargons aligned with the task. Good Job!!!!
Quite good knowledge,bring some more.very good practicals
At 7:24, you have really have to make sure that the long side of the square on the left is on contact with both walls of the elbow, otherwise, it doesn't give you any information (everything will always be square if there is no contact). Just like two points are always aligned, and three points are always co-planar
Looked at 7:24 and with my eyes it is touching both sides, just have to look real close with the video frozen.
Only thing I’ll say is at around 21 minutes I would’ve checked the vertical level in that flange and matched it with that other pup piece
Please do more pipe basics fitting thank u with levels and plumb bobs u are very helpful thank u.
Great video!!! I can tig-stick-fcaw pipe etc but I can't fit worth a damn!! I'm trying to get into an apprenticeship just to learn how to do this. thanks for sharing guys
Awesome video guys
Good job brother please make more video for pipe fittings ❤️love from India
like the fact that you show everything. good work
I don't know if its a loss in translation, but its called "Raised Face" flange not Razor face. As in, there is a "raised" ring around the inside, as opposed to a "Flat Face" flange.
The difference is that on things like pumps, strainers, valves, etc that are cast or made of a soft metal, the torque from bolts and the 1/4" gap on a raised face flange joint would bend and deform the flange, so flat faced flanges solve that problem.
The reason why every flange isn't flat faced though is that raised face flanges focus the torque on the bolts to the gasket area of the flange, ensuring a tighter seal.
Awesome job guys...keep up the good work
Very well done indeed, great demonstration.
Excellent video ! Keep up the great work
By the book bro!!
Very good fabrication ,helpful
Great Job
you guys r very professional tnks for yours videos i gonna star pipe fitter its good information for me tnks 👍👍
Super helpful video style
Great videos guys, learning alot of different skills, thanks
Nice one!
Man, I miss doing piping. Doing vessels now.
Thats my boy Marvin , real Texas pipe fitter! 🤘
Except he dont know what a flange face is called lol razor face? Think he was thinking of a razor sharp bevel and face is raised face
Nice fabrication
I needed something like this to improve my skills on the trade. They put me to fabricate on the shop but im not experience enough.
This dope man. Ima watch this til I get it 💯💯
Marvellous theoretical with practical
I mean this is a good video but the easiest way to fit a 90 is definitely tacking the sides first and then squaring it but i guess it’s all preference. Love the videos!
Nice job
7 Steps to help and also be more efficient:
1. Get a good pipe fitters book. The UA has a good blue book, the black pipe fitters and welders handbook by (Thomas Franklin) and the red pipe fitters book IPT's Pipe Trades Handbook by (Robert A. Lee) are great ones to have in your toolbag/box. A great investment that will last a lifetime
2. Get a welding rod and bend the spool or section of spool to build as a reference. Helps visualize the direction of 90s and offsets.
3. If possible build in sections and roll-out as much as possible. Alot faster and easier. You also eliminate the chance of busting out. You also reduce your in position welding to a minimum.
4. Use angle iron or channel and chain clamps for lining up 90s, flanges, reducers, pipe to pipe, etc (90% of the time the high/low will be spot on. If not then you can fit like they are and spit the difference.
5. If you can make a 90 degree jig/fixture for using chain clamps. I have a unistrut jig for 2", 3" channel for 3-4" pipe. Have the channel scribed so I know where the 90 needs to sit.
6. Using a long straight edge (4') vs a square helps on long runs to ensure it is square.
7. Keeping a variety of spacing shims and a wedge in you toolbag to help square. A sawzall blade (1/16"-5/64") works great for 2" pipe, V welding rod for 1/8"-5/32" gap.
Leonard Gonzales, what local are you out of? I noticed you mentioned the UA. I'm out of local 538. (I'm on my wife's account)
@@jenniferasbury8556 I personally am an oilfield pipe fitter (non-union), but have work with/along UA pipe fitters from time to time. The one UA in NM is 412 but when I worked in CA I worked with alot of apprentices that were my helpers out of the 114. Thats where I was shown the UA book. I learned from the Thomas Franklin black book, Spears Blue Book, and Nation Pipe Trades (NPT) red book.
Congratulations You are really good. You are masters it is nice to take from you.
Very good.
I have always put on uniform lands and always fit high low to top of land . you can not fit to O.D. of pipe to O.D. of fitting because a lot of times fittings will not be the same O.D. as the pipe or maybe other fittings . Uniformity of land is key . In a production shop one would fit to roll out welds . You want to weld as few welds in position as possible . A good fitter and welder can make magic in a day
Its so ok. 👍👍🖐🖐. thank for vidio. My thank from Indonesia.
Este video está machin. Ya siento que puedo firiar solo de ver este video de tan buena calidad
Victor being the real MVP here
Dat is awesome. Thanks, where I've been working companies now want a person to do 4 jobs n one. Like fabrication, fit, weld, and bolt up. Just 1dering if can do it by ur self
You can if you got the tools and equipment needed but ALOT HARDER by yourself sometimes impossible to fit and keep it fit while tacking
Nice work
Show them boys how we fabricate down south💪🏼
Lol
Its time for the pipefitters to shine ol' boy 😎
La tuyauterie,un bon métier. Génial.
buen trabajo limpio y preciso son buenos en lo que hacen buen trabajo melvin..cuidecen
y gracias ..
awesome video..more pipe fitting / fabrication videos
Muy buenos el tubería y el soldador, saludos desde Valladolid España 👏👏
21:33 you say the measurements out loud but end up tacking the wrong side. Point being other 2 guys also heard the same information and didn't correct you, it's a good lesson for apprentices/ helpers/ welders to actively be helping and not go on auto pilot and just go with whatever it is the lead man says and to speak up when you think a mistake is made or you have a question. Also I'm not trying to give you shit cause we all fuck up but more for helpers to pay attention and have our backs. Keep up the good work
They were doing a good job showing how to read and lay out a run. They did not show having to grind out the tack at 21.33 if they did not catch their mistake before tacking it. You are right it should have been tacked on the other side first. Some welder and fitter that work shut downs at oil refineries travel in pairs because they know how to work together to get the work done. The powers to be at a oil refinery I worked at for 32 years decided to cut the fitters pay to save money. One welder/fitter team that worked our S/D for maybe 12 years along with other welder/fitters teams did not show up for the S/D. The S/D ran long and the powers to be could not understand why it ran long because of the piping crews fell behind??????? Good pipe welding and fitting teams can always find work, you don't screw with one or the others pay and expect to get production. Bean counters are a dime a dozen, always trying to cut someone else pay to make them look good. Then they decided to cut the pipe welders pay also. Then the shit really hit the fan, pipe welders that could not go without busting weld x-rays that meant we had to go back and x-ray every weld they made on the S/D plus clearing all workers out of the x-ray shots areas. we went from working two 12 hour shifts for everyone to working two 10 hour shifts to get all the extra x-rays in. You get what you pay for. Just glad I am retired now and don't have to answer to bean counters!!!
Union Pipefitter/Welder Good Lessons Learned
This is possibly the hardest way ive seen anyone fit pipe
Yo quiero hacer eso, está bien rifadote, me gusta mucho la soldadura y estoy aprendiendo en la herrería de mi papá,. Sus videos me inspiran para seguir y estudiar eso jaja salu2
Nice... cant wait to come down for your pipe welding class. Pass my 3g open root and get in there...
Good 👌
If its for the hall its 6g
Please make video on elbow rolling & flange rotation.
We up here Boston pipefittahs
Dear wonderful .. great work.. good knowing
Awesome video
Nice explanation
very helpful ,thanks
I worked on a few Entergy jobs in Arkansas. Good company to work for
We used to make our reducers and orange peel caps. Gas welded.
More videos like this great job.
Why do they make you do so much math in school for pipefitting this video was just pretty much tape measuring, and leveling nice vid it gave me a lot of insight on pipefitting
Absolutely brilliant 👌🏻
Yeah guys more videos like this so I can get to the plants.
Really good to watch these bro for sure. I been fitting 7 plus years and watched this whole video among others today trying to find some more advanced ones just to knock the rust off because of COVID I been out on f trade as a fitter working other jobs the past year. However, these are amazing to watch but if you never fit pipe before, basically first thing you need to do is work as a helper for a hood solid year with a pipe fitter (hopefully a really good one at that too) one who will teach you everything you need to know basics and advanced as long as you show awesome effort, good attitude, and want to learn how! And bring him a personal lb of Barbacoa on fridays with tortillas for breakfast if ya working in Texas as appreciation! 🤪😂🤤🤤
Nice, sick video man very helpful
Seriously, in the time that you have explained it, I have assembled many pieces and without so much nonsense, I have been working as a boilermaker for 30 years.
Thanks for your videos bro i learned a lot salute you bro.