Dang nice build, sir. I like this option because my 200 year old house doesn't have a circuit in a usable area that will support my welder without blowing the breaker. Man, I need to figure out a way to upgrade my electrical system, but I need to jack up and level the house first. This "no welding" option will allow me to build a forge. Thanks for sharing.
have seen many variations of things using old propane tanks, and this seems SO much safet - always nice to do a project where you don't have to risk blowing yourself up!
Loved the video. When i get some money im deffinetly gonna build one. But, one small tip, when working with rotary tools (angle grinder, drill press, ect.) don't wear gloves and don't have long sleves. They can get caught and pull your extremities into the tool. Have a good day. :)
What is the stuff you spread on the insulation 11:10 ? Loved the build because I don't weld, it's good to see I don't need too to be able to make a forge.
@@ltjuglans194 Eh, no... The thermal cycling of the forge will quickly crack the clay, which will then fall off. Refractory cements are engineered to take the thermal cycling in stride.
Great idea. I tried to get an estimate together of the parts needed and cost - gets close to $100.00 not including finding a surplus water tank. I found the Ceramic Wool on Etsy for $11.00, most of the other prices were Home Depot.
OK. é LIKE amigo , parabéns encontrei o que eu queria . Tenho uma garrafa de compressor e vai dar para fazer o meu forno do tipo do seu . Um forno versátil para eu temperar e cimentar as engrenagens nova da caixa de RPM. do meu Torno , este dá e sobra . Tenho meio caminho andado . Um forte abraço e fique com DEUS e obrigado pela postagem . Forte abraço do BRASIL .
It doesn't look like from the editing that you "buttered" the ceramic wool. Any problems with the refractory cement peeling or not holding up? How often are you using this forge, and for how long?
I'm not OP but that paint is not Heat Resistant like the black he used, it was a heat resistant paint, the white would bubble and possible burn from the heat inside.
Nice but I learned in my first one. The burner nozzle is everything. Stainless insert for forge than burner housing. That galvanized or black iron get white hot it'll just start to crumble and effect the combustion. Your their though. Forge welding temps easy in her.
Oh shit. Folks, this is Day 1 of a new era: Young Je Blade and Tool Foundry has just begun. I predict in two years he will be casting his own iron plane bodies.
Two things I've done different on mine I put a 1 inch by 6 a.m. frame it in the bottom of mine and then I put wire mesh on for I put the mud on I put that over around a blanket
Love seeing varied projects from you. What you think about a door on the forge? The opening and heat probably don't make it necessary for optimal heat. I think of the loss of heat but don't know enough to understand the temperatures and what you're aiming for in there.
It's pretty common to use in a propane forge. It helps insulate the interior so the heat is reflected around the inside of the forge to heat quicker and be more efficient. The reason the refractory cement is then applied is to keep the carcinogenic compounds from forming more or less and to keep any fibers from escaping into the air
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Hey guys, very important detail 13:29. Use YELLOW teflon tape! Yellow tape is for gas! Don't use white tape! White tape is for water! Great video!
Dang nice build, sir. I like this option because my 200 year old house doesn't have a circuit in a usable area that will support my welder without blowing the breaker. Man, I need to figure out a way to upgrade my electrical system, but I need to jack up and level the house first. This "no welding" option will allow me to build a forge. Thanks for sharing.
I've seen many DIY forges but this one is by far the best. Now I have the design to build my own. Thank you so much for sharing!
Every time you release a video, it is a good omen for my week. You must be a saintly person.
Great Job! I am impressed with the knowledge you show in your work with kale wool fitting and refractory work. Again, very good job!
have seen many variations of things using old propane tanks, and this seems SO much safet - always nice to do a project where you don't have to risk blowing yourself up!
You are a very good builder. Loved the vid. Keep up the good work. I was impressed as to how diligently you worked the build.
I really like this guy. So many things you make that I would think id have to buy....we need to start thinking outside the box. Thank you again.
Loved the video. When i get some money im deffinetly gonna build one. But, one small tip, when working with rotary tools (angle grinder, drill press, ect.) don't wear gloves and don't have long sleves. They can get caught and pull your extremities into the tool. Have a good day. :)
I’d also say don’t use a grinder so close to the family jewels. I was holding my breath for the first minute.
What folks won't go through to heat the garage in this cold snap!
Stay toasty, good sir!
What is the stuff you spread on the insulation 11:10 ? Loved the build because I don't weld, it's good to see I don't need too to be able to make a forge.
It's still refractory cement.
he held the container so you could see. It's a refractory cement. High temp cement.
Refractory Cement keeps heat well
If you do not use high-temperature cement your forge will reduce its lifetime by half,
in places where the soil consists of clay it is better to use clay, clay is super heat resistant and for free
@@ltjuglans194 Eh, no... The thermal cycling of the forge will quickly crack the clay, which will then fall off. Refractory cements are engineered to take the thermal cycling in stride.
Every video is better than the last Mr. Je.
Great idea. I tried to get an estimate together of the parts needed and cost - gets close to $100.00 not including finding a surplus water tank. I found the Ceramic Wool on Etsy for $11.00, most of the other prices were Home Depot.
Used at 7:57 ;-)
Thank you, I was wondering what to use.
Hi love the build as i dont weld nice and simple, can you please put up a list of materials you use to make this, and all measurements thanks
Nice work! I'm guessing you are trying your hand at blacksmithing next. You will enjoy that as you have a wonderfully creative mind.
what brand mig tip? what size hole drilled prior to tapping and what size a tap did you use> Thanks.
WOW! Dude! Amazing work!!! 😮
Que material es lo que lepones adentro lo blanco
OK. é LIKE amigo , parabéns encontrei o que eu queria . Tenho uma garrafa de compressor e vai dar para fazer o meu forno do tipo do seu . Um forno versátil para eu temperar e cimentar as engrenagens nova da caixa de RPM. do meu Torno , este dá e sobra . Tenho meio caminho andado . Um forte abraço e fique com DEUS e obrigado pela postagem . Forte abraço do BRASIL .
정말 대단하세요!!
최고입니다^^
저는 무서워서 엄두도 못낼것 같아요- -;;
조금 전 기사에서 봤는데 시카고 기온이 남극, 시베리아보다 춥다고 하네요,,,
앞으로 더 추워진다니 걱정입니다...
몸 잘 챙기시고, 위험한 작업은 살살^^~~
그동안 은예년같지않아서,,,뭐지? 했는데 ~~ㅎ
학교,상점 모두 닫았어요
주말부턴 풀린다고하네요,
@@YoungJe 다행이네요~
새해 복 많이 받으세요^^
새해복많이받으세요
Nice build...what size hole is on the mig tip?
You are very clever sir, nice job!
Mr Je I think you are moonlighting from NASA’s Jet Propulsion Lab, 🌡⚗️,Well done on a great covert mission. 🦖
Another excellent video! You are in the US?
Enjoyed very much and a Thumbs Up also
Very nice build thumbs up
Bu beyaz olan seramik elyaf mı
13:06 it has a face! 16:38 that face breathes fire!
Muchas gracias. Excelente. Saludos
It doesn't look like from the editing that you "buttered" the ceramic wool. Any problems with the refractory cement peeling or not holding up? How often are you using this forge, and for how long?
White foam?rockwoll/glasswool sir??
www.amazon.com/s?k=ceramic+wool&crid=HLBCJQC73I84&sprefix=ceramic+wool%2Caps%2C186&ref=nb_sb_ss_ts-doa-p_1_12
@@YoungJe thanks sir..
What is name the white sheet material?
Okay, maybe a stupid question: why did you bother to take the paint off the outside of the tank? Is that a must?
I'm not OP but that paint is not Heat Resistant like the black he used, it was a heat resistant paint, the white would bubble and possible burn from the heat inside.
Was that a MIG welding nozzle you used for the jet? If so, was size opening was it? Nice build
Yes its mig nozzle .People use 0.8 or 1mm.
i Just build my propane forge "force air burner" and I used a .30" mig tip.
Thanks
Great vijeo keep up the great work
nice build
Great idea. Thanks for sharing.
Excellent build! What was the first thing you heated to make sure it worked? And did you have an anvil and hammer to bend it?
If use 1090 steel & 01 tool steel, do not need special anvil and hammer.
Cool work 👍
Where the frak do you get that tap???????
Super 👍robota
Pozdrawiam z Polski.
오렌 만에 선생님 작품 보네요, 지금 부터 쇠 가지고 작없 하실려구 만들었나요? 진짜 솜씨가 대단 해요 잘밨읍니다.
Andy Kang whatever you said Andy I agree with you.
칼을 만들어보려구요~^^ 감사합니다~
@@YoungJe 아! 만들면 보여 주제요 사구 싶으네요.
Fine work young je
Nice but I learned in my first one. The burner nozzle is everything. Stainless insert for forge than burner housing. That galvanized or black iron get white hot it'll just start to crumble and effect the combustion. Your their though. Forge welding temps easy in her.
댓글도 직접 쓰시는 건가요? 손자분이 촬영하고 편집하시는 거죠?
저 아직 젊어요~^^손자는 이제 4살 ㅋㅋㅋ
@@YoungJe 헉 그렇군요 아무튼 잘 보고있습니다
Oh shit. Folks, this is Day 1 of a new era: Young Je Blade and Tool Foundry has just begun.
I predict in two years he will be casting his own iron plane bodies.
Is there anything you don't know how to make? LOL
Thanks for sharing.
정말 대단 하십니다!!!
감사합니다
LOOKING FORWARD TO THE FORGING!!
What does your homeowners policy say about that.
Two things I've done different on mine I put a 1 inch by 6 a.m. frame it in the bottom of mine and then I put wire mesh on for I put the mud on I put that over around a blanket
Love seeing varied projects from you. What you think about a door on the forge? The opening and heat probably don't make it necessary for optimal heat. I think of the loss of heat but don't know enough to understand the temperatures and what you're aiming for in there.
Great, thanks for sharing!
Excelente ,te felicito
Wow that's was Awesome
Thanks for sharing !
You are a creative problem-solver.
That’s a beauty
Must build one now! ! !
Perfect.
Good
nice!! 💪 👷🏻
Would be nice to include a materials list with links.
Thanks for sharing that
I'm Not Sure What that Ceramic Wool Insulation is But Some of that Stuff Turns into a Serious Carcinogenic Compound Once its Heated to 1600° F.
It's pretty common to use in a propane forge. It helps insulate the interior so the heat is reflected around the inside of the forge to heat quicker and be more efficient.
The reason the refractory cement is then applied is to keep the carcinogenic compounds from forming more or less and to keep any fibers from escaping into the air
It's getting hot in there
지금 한국은 설 연휴입니다. 새해 복 많이 받으십시오~!!
감사합니다, 새해복많이받으세요
Dude loves his angle grinder....
Clamp that water tank onto a Lazy Susan (Rotating table), and replace that marker with the grinder. Lol.
목장갑과 고추장통을 보면 한국 게시는거 같은데.......인치 사이즈 사용하시는거 보면 어디에서 활동 하시는지 짐작이 안되시네요....
미국입니다~^^
i know the black screws :D from a old office chair
Uuuuummmmmm, WHY are you putting refractory cement OVER kale wool AND fire bricks? TOTALLY un-necessary!
Kale is a vegetable.