Yessir more Rams! Keep them coming offsets! Does y'all carry a 3.5 inch lift/level ( like the 07-13 GM trucks ) but for the 09+ Ram 1500s? Thanks guys. My favorite channel by far and looking to purchase some wheels and possibly a lift from y'all!
Wow Damn that person took it in the mud for sure 💯 it's all rusted under neath but it looked awesome otherwise. Please do more like these but a longer video please. Thanks . Keep up the good work 💯😎👊🏻🇱🇷
Good video, but isn't it necessary to change the suspension arms for ones with longer travel and also the stabilizer bar that joins the chassis to the body? I'm about to install the two inch rear raising kit on my ram. 1500 but I am taking into account whether I should change the arms for ones with greater travel and also the stabilizer bar. What is your recommendation?
I put this lift kit on my 2015 ram 1500 and now I have a rear bounce/hop at exactly 50mph. I have new bilstein shocks and yes, they are mounted correctly. Have no clue what’s causing it.
Updated research I confirmed the rough country sway bar end link was installed and this is causing the problem , it is to long . now I will let rough country know and hope I get the right sized end link for my Ram 1500 .
Steven, Rough country is a great entry level lift kit! They hold up well! If you're looking for added ride quality and durability it never hurts to step up into a BDS/Fabtech/ McGaughy's! Check them out here- bit.ly/2fQ7apo
I have bilstein 5100 on mine set at 2.8 and blew 2 aet of cv axles in 50k...would this be better on cv angle ? And can this be installed on 17" tires ?
I really want to do a lift kit for my truck I just levelled it front to back and want to go higher 4” or 6” but I font want it to be so pricey so I don’t know what way to go
I purchased the 4 in lift and had it installed at a well know Shop Jack Williams in PA , But I have an issue with the front shocks a loud thud when I drive over a 1-2 in sunken sewer cap which are every where , so I finally think we got it figured out , we did a side by side comparison same truck with another 4 in lift different but a different make , we found that the front sway bar side link on my truck to be 8-9 in long , the other link is half the size of my link , my link is pressing down the lower control arm extending the shock to much and restricting the shock from working . I have to change this side link to a shorter one , and check if its rough country link or the factory link that maybe wasn't changed , it sucks spending all this money , and I have to deal with this problem . what do you think .
Cool Man , thanks for the reply , I'm not an expert but you opinion is greatly appreciated , I called RC today and sent them email Photos , the tech telling me the links are long to keep the truck level on turns , will see what they say after they see the pictures of the torsion bar the curved end is pushed up on a 45 degree angle . I wish I could post photos here.
What is the measurement of the highest point of the truck. I got a 2017 I want lift 4in and put on 35s. Just want to know how tall it’ll be. What can I clear.
Wow I love that color! Yea that's the new Copper Color edition Ram!! But I can't believe they did not take another few hours to do a quick paint over underneath over the rust down there while they had it in the air and disassembled! It would have taken something like starting the job mis afternoon, to get it all apart. Then paint and let sit till morning and then finish the job! I might even add a few pieces painted copper to match the truck! The interiors have some very nice tastefully done copper accents! But I would definitely not go any higher, but would use tiers/wheels that would not stick out past the fenders, plus add some fender flares painted to match!! With some Bilstein 5100's!
I have 2014 Ram 1500 looking at the RC 4in lift but I run 17 on rims and the kit says they don’t work with them. I don’t see why not? My rims are 17x9 -12 should I be good to go?
I have some custom Hemi badges, decals...No longer have my Ram. They are black and red, Say "HEMI" with the Diablo Sport logo. Pretty bad ass, payed 120 a year ago, will ship out to someone for 75 shipped for the pair. Obviously after email contact and pics :)
33's should be no problems. I'm running them on mine. No rub anywhere anytime. I spend a couple of hours offroad each day. I'm planning to install a leveling kit and going to 35's.
How does this kit make the ride change at all in this truck? The original strut up front is used and the original springs in the back were used. The only thing that probably changed was tire ply. I mean a block doesnt make a trucks ride quality change?
@@brandonkudrick2417 Not very knowledgeable in this field only thing I can think of is higher = rougher. Not always the case but 99% of the time a 4 door sedan will ride smoother than a SUV or truck. This is even more true when it comes to luxury vehicles. Sometimes a heavier truck or SUV will ride smoother than a typical car though. Overall this tends to be the case from mine and other's experiences. Please correct me if I am mistaken.
Need to have full side profile. Can’t tell if truck sits level or not. Sounds like he’s not even sure. A lot of their videos you don’t see enough of a side profile
Hello! We actually have just paused the intake of new orders until May 19th! We need to focus on punching out the rest of these orders that we have now. We will be right back though, everything is fine on our end. We just need some time to get everyone their orders! Hope you understand and continue to rock with us down the road!!
@@CustomOffsetsTV gorgeous ! Do you guys have any with a -6 offset or flush ? I dont really want them to stick out of my truck and if they do just barely
Marcus Young it's crazy how popular RC lifts are. I think they are junk personally. I have RC on my Wrangler and it rides like shit! I hate it. The prices are just unbeatable, but you get what you pay for I feel. I would rather spend the extra money and get a BDS or something.
Sonny Mcelfresh I care about being level more than I care about being lifted. Quality level til I can afford a nice lift, if I wanted it. My stocks tires are already tall enough (34").
Check out lift kits for your 2wd here Daniel! - www.customwheeloffset.com/store/suspension?sort=instock&year=2010&make=Dodge&model=Ram%201500&drive=RWD&saleToggle=0
got a flat tire and he said screw it got a lift, tires and rims! I like your style!!
Pulled up with a spare tire, left with a lift kit, set of new wheels and tires!
That is 1 hell of an salesman!
Lol. The best.
If you are wondering they are 22x12s on 35s
I was just about to ask
read my mind.
I really dig this truck. Color. Fitment. Everything. Love to get more details from the owner. If you're out there, reach out if you don't mind.
Specs for rims and tires? Since this video appears to be well over a year old I would assume there is no "spotlight" coming for this truck.
My truck looks exactly like this one, same color too and rims and tires
Can’t wait to get this lifted
Yessir more Rams! Keep them coming offsets! Does y'all carry a 3.5 inch lift/level ( like the 07-13 GM trucks ) but for the 09+ Ram 1500s? Thanks guys. My favorite channel by far and looking to purchase some wheels and possibly a lift from y'all!
Jordan Hannah They have a Zone 3.5" Combo Lift Kit Ram 1500 2012-2017. The kit says tm you can run up to 35" tires with it.
Wow Damn that person took it in the mud for sure 💯 it's all rusted under neath but it looked awesome otherwise. Please do more like these but a longer video please. Thanks . Keep up the good work 💯😎👊🏻🇱🇷
Could live near salt water or could be from salt they use up north to melt ice. Hopefully it's from muddin tho
Good video, but isn't it necessary to change the suspension arms for ones with longer travel and also the stabilizer bar that joins the chassis to the body? I'm about to install the two inch rear raising kit on my ram.
1500 but I am taking into account whether I should change the arms for ones with greater travel and also the stabilizer bar. What is your recommendation?
Y'all got me nervous grinding with no PPE
Still waiting on this vehicle spotlight this truck build is perfect
I put this lift kit on my 2015 ram 1500 and now I have a rear bounce/hop at exactly 50mph. I have new bilstein shocks and yes, they are mounted correctly. Have no clue what’s causing it.
Where can I get those HEMI badges?!
Finally my patience pays off and they do the lift/year I want to see (mines a 2011) and wouldn't you know it - HE DIDN'T give the WHEEL/tire SPECS?!?
Ferris McGurk stand by! Spotlight on this truck is in the works! Lifts and Levels focuses on just suspension. We won't leave you hanging!
Updated research I confirmed the rough country sway bar end link was installed and this is causing the problem , it is to long . now I will let rough country know and hope I get the right sized end link for my Ram 1500 .
cool hight and nice truck but i dont like cut the chassis and use the grinder on it, so rough country please improve your products.
Saleh, quite a few lifts actually do this.
heard good and bad about rough country lifts. what are your thoughts on these kits or do you reccomend another brand.
Steven, Rough country is a great entry level lift kit! They hold up well! If you're looking for added ride quality and durability it never hurts to step up into a BDS/Fabtech/ McGaughy's! Check them out here- bit.ly/2fQ7apo
I have bilstein 5100 on mine set at 2.8 and blew 2 aet of cv axles in 50k...would this be better on cv angle ? And can this be installed on 17" tires ?
Custom offset an answer would be a lot better than a little heart
I really want to do a lift kit for my truck I just levelled it front to back and want to go higher 4” or 6” but I font want it to be so pricey so I don’t know what way to go
Hemi badges are dope where can I find them
Main Event Emblems
What size are the rims n tires
Is this for a 2wd or 4wd
For the drive shaft spacer what did you use??
I purchased the 4 in lift and had it installed at a well know Shop Jack Williams in PA , But I have an issue with the front shocks a loud thud when I drive over a 1-2 in sunken sewer cap which are every where , so I finally think we got it figured out , we did a side by side comparison same truck with another 4 in lift different but a different make , we found that the front sway bar side link on my truck to be 8-9 in long , the other link is half the size of my link , my link is pressing down the lower control arm extending the shock to much and restricting the shock from working . I have to change this side link to a shorter one , and check if its rough country link or the factory link that maybe wasn't changed , it sucks spending all this money , and I have to deal with this problem . what do you think .
Sounds like you basically got it figured out! The headache should be over soon!
Cool Man , thanks for the reply , I'm not an expert but you opinion is greatly appreciated , I called RC today and sent them email Photos , the tech telling me the links are long to keep the truck level on turns , will see what they say after they see the pictures of the torsion bar the curved end is pushed up on a 45 degree angle . I wish I could post photos here.
thanks for your professional opinion and support , I'll be going to your web site to shop around .
@@get-go596 did rough country fix the issue?
What did RC do to fix?
How hard is it to replace ball joints?
Where you get that emblem
Did you have to get longer brake lines? Or was this job just smooth and easy. Install kit and rims/tires and drive.
Kit comes with everything needed!
@@CustomOffsetsTV nice. U didn’t have to put longer brake lines on it?
How much you guys charge to install a procomp lift and side steps the dealer wants to Charge me 10,000 feel like it's a rip off
Shoot our local shop an email! info@offsetsgarage.com !
Any chance of a 3in RC lift on a 3rd Gen RAM? This one looks great!
No no, I was asking if they could do a different episode with the 3in lift for a 3rd gen
CB CarStyle yea i know.
Rough country or zone ? Zone about 600-700$ more
Depends on your budget! If you can afford a zone lift they're definitely worth the bit more $$ for a better ride!
Will this work for a 2010 dodge ram 1500p trx4? If so. Any problems
Yes it will! And if installed correctly you shouldn’t have any issues.
What is the measurement of the highest point of the truck. I got a 2017 I want lift 4in and put on 35s. Just want to know how tall it’ll be. What can I clear.
We are not able to get a measurement on it currently but it will fit in an 8ft garage.
it doesn’t rub?
How much for a lift like this I need one for my ram 2012
Check out our website!
www.customwheeloffset.com/suspension
So how much lift does the rear block add? Or how big is the rear coil spacer?
Check that kit out here! bit.ly/2UGH8tl
What wheel size ?? Diameter and width and offset
Wow I love that color! Yea that's the new Copper Color edition Ram!! But I can't believe they did not take another few hours to do a quick paint over underneath over the rust down there while they had it in the air and disassembled! It would have taken something like starting the job mis afternoon, to get it all apart. Then paint and let sit till morning and then finish the job! I might even add a few pieces painted copper to match the truck! The interiors have some very nice tastefully done copper accents! But I would definitely not go any higher, but would use tiers/wheels that would not stick out past the fenders, plus add some fender flares painted to match!! With some Bilstein 5100's!
Amber whiskey
Mango Tango is the color name
Got the spotlight video of this build?
I have 2014 Ram 1500 looking at the RC 4in lift but I run 17 on rims and the kit says they don’t work with them. I don’t see why not? My rims are 17x9 -12 should I be good to go?
It has to clear the knuckles (lift dependent)
How good is this compared to BDS
Not as good in some aspects but still definately a good bang for your buck!
Do a ram1500 with the new rough country 3" level lift
I’m gonna do this to my truck.
cuatom offsets how much cost to lift my pick up like this one???
email our local store in Appleton, WI info@offsetsgarage !
Custom Offsets damm i just moved to LA, i used to live in madison :/
Is that truck 4x4
Where can I get that HEMI emblem?? Dope
You left out if it runs or if any trimming needs to be done. I want this exact setup but don't want to trim
Stay tuned for the spotlight! This was just lifts and levels!
I have some custom Hemi badges, decals...No longer have my Ram. They are black and red, Say "HEMI" with the Diablo Sport logo. Pretty bad ass, payed 120 a year ago, will ship out to someone for 75 shipped for the pair. Obviously after email contact and pics :)
Jason Powell still got em ?
What's the overall height?
I’ve got a 19 ram classic was thinking about going 4 in lift with 33s what ya think ?
Look at our gallery and see if it’ll work and if you like it
man! 🤘🏼🤘🏼 bit.ly/2Q24zeC
33's should be no problems. I'm running them on mine. No rub anywhere anytime. I spend a couple of hours offroad each day. I'm planning to install a leveling kit and going to 35's.
Do a Vehicle Spot light on this. like to know what size wheels and tires.
Sonny we will be! :)
Just curious on how the ride quality changes with just the lift?
Some lift kits get a little rougher of a ride, such as this one, some stay closer to factory or better depending on how much you spend Terry!
How does this kit make the ride change at all in this truck? The original strut up front is used and the original springs in the back were used. The only thing that probably changed was tire ply. I mean a block doesnt make a trucks ride quality change?
@@brandonkudrick2417 Not very knowledgeable in this field only thing I can think of is higher = rougher. Not always the case but 99% of the time a 4 door sedan will ride smoother than a SUV or truck. This is even more true when it comes to luxury vehicles. Sometimes a heavier truck or SUV will ride smoother than a typical car though. Overall this tends to be the case from mine and other's experiences. Please correct me if I am mistaken.
Does this kit fit the Trx version?
According to the description yes! bit.ly/2VdDU10
Need to have full side profile. Can’t tell if truck sits level or not. Sounds like he’s not even sure. A lot of their videos you don’t see enough of a side profile
Its level
Roughly how much would this lift and level cost to have done professionally?
Every shop varies Blaze. Your best bet is to ask your local shops
Custom Offsets will do. Thanks for the reply!
What size tires and rims?
tires 35 x 12.5 x 22 ---- rims 22 x 12 with -44 offset
Any idea wether this will fit in a 7ft garage?
We unfortunately did not measure roof height before the truck went back to the customer Solly
Custom Offsets how do you guys recalibrate the speedometers on these Rams when you put bigger tires?
Do you have those rims for sell that stock ones tho
Hello! We actually have just paused the intake of new orders until May 19th! We need to focus on punching out the rest of these orders that we have now. We will be right back though, everything is fine on our end. We just need some time to get everyone their orders! Hope you understand and continue to rock with us down the road!!
where did he get those hemi badges?
Main Event Emblems
Did you use the 3m version or stud
Is this truck a 4x4 or 4x2 ?
This is a 4WD
You should have shown a full view of the truck after it was finished... j/s
This series is all about the suspension Celtic! Check our spotlight reel out for spotlights of this truck and many more!
I have a 2016 Dodge RAM 1500 trying to customize my truck maybe a lift kit rims and it's a but don't were to start
Check out lift kits here Corey! -bit.ly/2tWgiRS
Wheels/tires here- bit.ly/2lN5sW8
And our gallery of ram 1500's for idea's! bit.ly/2hNKFjV
thanks Gilbert
What size are those tires?
35x12.5!
@@CustomOffsetsTV any trimming required to fit 35”?
What are the wheels
They are Ballistic Rage’s! Check them out here!
www.customwheeloffset.com/store/wheels?sort=popular&suspension=Leveling%20Kit&modification=No%20trimming&brand=Ballistic&wmodel=Rage
@@CustomOffsetsTV gorgeous ! Do you guys have any with a -6 offset or flush ? I dont really want them to stick out of my truck and if they do just barely
what size are the wheels and tires
Danny V looks like 22x12 on 35s but I could be wrong.
Danny V - tires are definitely 35 x 12.5 x 22 ---- and rims as Gilbert Luna said 22 x 12 with -44 offset
Gilbert Luna I think they are the Ballistic 22x12 -44 paired with 35x12.5
OK cool thanks guys I like that set up
I was just wonwondering so I know what to put on my truck
What color is that??😍😍
Orange!
anyone know where i can find that hemi badge
Looking for the same thing bro
Have you found it?
Main stream emblems
Please post the wheel/tire combo used in the description.
Michael, for lifts and levels, its all about the lift/leveling kit. The spot light will cover everything with links to everything!
Sick
Nice job, but have to paint all rust parts.
clean ass ride💯💯💯
Nice !
👍😎❗
Need to repaint under the truck very badly rusted
Scott Masten nothing compared to my truck lmao
Can't believe all the rust on that truck. Sad
Finally a Ram. Too bad he cheaped out with RC
Marcus Young it's crazy how popular RC lifts are. I think they are junk personally. I have RC on my Wrangler and it rides like shit! I hate it. The prices are just unbeatable, but you get what you pay for I feel. I would rather spend the extra money and get a BDS or something.
Sonny Mcelfresh I care about being level more than I care about being lifted. Quality level til I can afford a nice lift, if I wanted it. My stocks tires are already tall enough (34").
Sonny nailed it, you get what you pay for, and RC is definitely wallet friendly!
I would take down the rear qq
That undercarriage. Wow.
He sounds like he hates his job
Will this work for a 2010 Dodge Ram 1500 2WD Laramie if so . Any problems
Check out lift kits for your 2wd here Daniel! - www.customwheeloffset.com/store/suspension?sort=instock&year=2010&make=Dodge&model=Ram%201500&drive=RWD&saleToggle=0
What size are weels and tires?
Stay tuned for the other videos of this truck! This one just covers the lift/level Jose!