Does anyone know if Glen is okay? It's been months since his last video and he is normally a lot more active on his channel. Glen, we hope you are well. Come back soon!
Hey Glen… just want to share… my first child, Maya, and I used to watch your videos up until the middle of the night (she was sleeping in my arms) and it got us through the pandemic and kept us learning… you did so much to bring great energy to your viewers. So thanks! Waiting to see you again and praying for good things for you and your family.
Just found this RUclips channel a couple months ago. Probably one of the best DIY channels on the net. The instructions are excellent. Unique projects. And the video and audio quality is top notch!!
That turned out pretty nice. I've seen people use change in their floors. But this table is a nice addition. Good to see you're still going. Can't wait to see your next project.
Nice ! Making something "old" new again, is always fun. I made a mid century modern style coffee table years back. Like you I got bored with it. It just seemed too plain. So I redesigned the legs, added a slotted shelf underneath, and refinished the top. Now it's the center piece of the living room. And as always a great video...Keep up the good work!!!
This is absolutely a beautiful table. But did you know from a coin collector's point of view you could have the most valuable corn in this stash you should start checking your appendix before you glue them down to make sure you didn't win a fortune but you're working beautiful and I love following your page you have taught me a lot.
Nice I made a table with pennies 25 yrs ago when my sons were teens I named it Pennies for your thoughts where we gathered for discussions Luv the design on this 👍
Very nice result! And if people are worried about it tilting with toddlers... just make the base wider. Sure toddlers should listen when they are told not to get on the table but kids are kids so just make the base wider and you'll be fine.
GREAT project Glenn. I bet the first two rows of the pennies were fun then something like what the hell am I doing?? I do like the wave effect and spreading them out. You always do a good job with the LED's. Starbond should be a sponsor! !! !!!
Love the look of the pennies being completely orderly and then dispersing into random chaos! If it would have been possible to bend them properly at a 90 degree angle then you could've made the pennies go around the corners, that would've been nice too!
That looks awesome! My dad has a tip for using saws; angle fingers away from the saw, and fold the thumb under your hand. I don't know if it works, but he's been doing construction professionally for 50 years and still has all his fingers :) I guess if he ever does saw himself, he'll lose the whole hand
You have a lot patience my friend because I know gluing those pennies took a long time. I completed a small project that involved gluing individual items and it took me more than half of the time to complete the project. Good job.
You better not throw away any it goodies you know I'm here all the time for you so knowing that we just live miles apart if there's ever anything you want to get rid of let me know I'll be there to pick it up or meet you some place and pick it up golly you made that gorgeous little bit is going to have a good time trying to count pennies God bless peace be with you much love and respect
Beautiful table, and Great Video!!! . . . Your clear directions and breakdown of tasks make woodworking projects approachable and not so intimidating to less experienced DIY-ers like me. I also appreciate various workarounds that you share to cope with real-world challenges. I have used a couple of your videos/blueprints in the past, and friends and family members loved the results. Thanks again for sharing your experience with the RUclips community. It's time to click "Super Thanks" button!
I check your channel regularly and i am sad to see no content for over a year. I truly hope all is well with you and yours bro. Hope life is treating you good.
Hi, I'm from the UK , have been wondering if Glen is OK too, this side of the pond is missing him too, so hope he's ok, and just taking a well earned break. And if you are taking a much earned break then get your behind back to work peeps are missing you ❤️
Hey Glen, I was just wondering if your done with RUclips? Maybe you could just pop by and give us all a clue. Anyway. Here's to hoping to see you again. Cheers.
@@DIYCreators I don't think you give yourself enough credit, your creativity and relatability makes many of these project seem easy despite the level of difficulty that presents itself, plus much of the work that yo9uyr present to us looks amazing. I think you are more than able to handle that bredren. however I think that you know better than I when it comes to what your capable of, that being said, I am a big fan, love everything I have seen you put together. Your work is amazing, I only wish I had the time to try many of the projects you post.
My Question is was it necessary to painstakingly glue all the pennies on top at the end, if you were going to pour epoxy over it anyways? I dont think they would have moved
Hey guys, just saw a RUclips video of an interview that Glen did, they said that he's OK, the name of the channel is - KB Tax Deviser CPAs, they said the interview was recent
Todos os detalhes perfeitos. Gostei muito da ideia vou utilizar algumas técnicas aqui na marcenaria. Seu trabalho tem me motivado bastante muito obrigado Deus lhe abençoe.
Your videos wow me! Do you have any videos or know anyone that does, on epoxying over knick knacks that are gold plated? Will it ruin the paint or gold?. I have some mice knick knacks that belonged to my parents, and one was a gift to me from my dad, he bought for me after I told him my dream with a mouse when I was a child. The ear broke off. After I repaired it I wondered if it was possible to epoxying them into a cube or rectangle to preserve them. Thanks for your awesome videos!
Does anyone know if Glen is okay? It's been months since his last video and he is normally a lot more active on his channel. Glen, we hope you are well. Come back soon!
I'm here for the same reason. I hope he's doing alright. I miss his videos for sure.
I was wondering the same thing. This channel has great content.
I was wondering the same thing! Where is he. Is he ok?
@@wojtek-33 Where? Was it a short?
It's amazing to go from millions of views and followers to nothing for over six months
Hey Glen… just want to share… my first child, Maya, and I used to watch your videos up until the middle of the night (she was sleeping in my arms) and it got us through the pandemic and kept us learning… you did so much to bring great energy to your viewers. So thanks! Waiting to see you again and praying for good things for you and your family.
What a beautiful message. I hope he is safe and well
Just found this RUclips channel a couple months ago. Probably one of the best DIY channels on the net. The instructions are excellent. Unique projects. And the video and audio quality is top notch!!
That turned out pretty nice. I've seen people use change in their floors. But this table is a nice addition. Good to see you're still going. Can't wait to see your next project.
Thank you, You can do pretty interesting projects with them for sure,
@DIYCreators are u still alive
Nice ! Making something "old" new again, is always fun. I made a mid century modern style coffee table years back. Like you I got bored with it. It just seemed too plain. So I redesigned the legs, added a slotted shelf underneath, and refinished the top. Now it's the center piece of the living room. And as always a great video...Keep up the good work!!!
God bless you very much.
I've not been seeing your videos so I became worried because of the deadly desease ,thank God you are alive.
From Ghana
I adore your positivity. Keep shining your light and sharing your creations. God Bless.
Wow,your really a natural...your ideas are feeding alot of needy people here in S.A
This is absolutely a beautiful table. But did you know from a coin collector's point of view you could have the most valuable corn in this stash you should start checking your appendix before you glue them down to make sure you didn't win a fortune but you're working beautiful and I love following your page you have taught me a lot.
Miss you Glen. Much love from Sydney Australia
What a brilliant idea to use a basting brush to spread the epoxy. Easy clean up and use again.
Nice I made a table with pennies 25 yrs ago when my sons were teens I named it Pennies for your thoughts where we gathered for discussions Luv the design on this 👍
Attention to prep work and patience definitely helps this come out looking well!
The patience you have to glue all those pennies down...hats off to you. Looks good.
Thank you! You def have to have patience :)
Missing your videos. Hoping you and your family are safe and well ❤🙌🏾
Being a coin collector - - OMG. I must have one!!! Thank you sooo much!!!! Love how you teach!!
You are so welcome!
I’m thinking please let those be the “return to bank” stack haha
Very nice result!
And if people are worried about it tilting with toddlers... just make the base wider. Sure toddlers should listen when they are told not to get on the table but kids are kids so just make the base wider and you'll be fine.
Thanks I agree!
We all hope you're doing good buddy! Miss you and your sweet ideas!!
GREAT project Glenn. I bet the first two rows of the pennies were fun then something like what the hell am I doing?? I do like the wave effect and spreading them out. You always do a good job with the LED's. Starbond should be a sponsor! !! !!!
Love the look of the pennies being completely orderly and then dispersing into random chaos!
If it would have been possible to bend them properly at a 90 degree angle then you could've made the pennies go around the corners, that would've been nice too!
Good job Glen. I made the floating shelves. Now I am going to make the dream desk.
This turned out beautiful
Thank you
I thought the original design was great but man this took it up a notch!
😃 thanks!
You have talent beyond mere mortals!
Thank you
That looks awesome! My dad has a tip for using saws; angle fingers away from the saw, and fold the thumb under your hand. I don't know if it works, but he's been doing construction professionally for 50 years and still has all his fingers :) I guess if he ever does saw himself, he'll lose the whole hand
Love this table and the way it turned out. a Great way to upcycle and repurpose furniture.
You have a lot patience my friend because I know gluing those pennies took a long time. I completed a small project that involved gluing individual items and it took me more than half of the time to complete the project. Good job.
Everytime I come back to your channel, I find the most amazing inspiring stuff.
I remember when you build this, I enjoyed your build a lot.
You better not throw away any it goodies you know I'm here all the time for you so knowing that we just live miles apart if there's ever anything you want to get rid of let me know I'll be there to pick it up or meet you some place and pick it up golly you made that gorgeous little bit is going to have a good time trying to count pennies God bless peace be with you much love and respect
haha I wont, Thank you for tuning in. :)
@@DIYCreators at least I made somebody smiling giggle today much love babe give little bit some fun God bless
That table looks like money. The design makes sense. 😊
Beautiful table, and Great Video!!! . . . Your clear directions and breakdown of tasks make woodworking projects approachable and not so intimidating to less experienced DIY-ers like me. I also appreciate various workarounds that you share to cope with real-world challenges. I have used a couple of your videos/blueprints in the past, and friends and family members loved the results. Thanks again for sharing your experience with the RUclips community. It's time to click "Super Thanks" button!
Outstanding Design & Craftsmanship!!
Thank you!
I check your channel regularly and i am sad to see no content for over a year. I truly hope all is well with you and yours bro. Hope life is treating you good.
It's honestly crazy how much this channel has grown. Keep up the good work 👍
Hi, I'm from the UK , have been wondering if Glen is OK too, this side of the pond is missing him too, so hope he's ok, and just taking a well earned break. And if you are taking a much earned break then get your behind back to work peeps are missing you ❤️
Hey Glen, I was just wondering if your done with RUclips? Maybe you could just pop by and give us all a clue. Anyway. Here's to hoping to see you again. Cheers.
Nicely done, with some SERIOUS patience...
Great job
Looks great. I would pack the coins tighter, alternating the rows to create that gradient effect. Basically treating each coin like a pixel
That would be nice too.
I love how you repurposed the table. I remember when you built it. Awesome job homie!
Thank you, can't believe you remember that.
@@DIYCreators yes sir. We go back some years now. Your work is always awesome and on point.
Dude, you're a good teacher. Kudos.
You definitely deserve your own tv show
This is like a legit show!!!
Your pieces are works of art. From concept to execution. Thanks for sharing another video.
Thank you for watching :).
@@DIYCreators are you still around. ?
A great upgrade to your table.
Very nice...especially appreciate your suggestions at the end for weighting the base down
Amazing. You're really getting a lot of good projects with resin, thanks for sharing - you inspire me.
Very nice , glad to see you used good cents to build the table .LOL .
Thanks 👍 lol
Very nice! And a battery pack LED lights? Great.
That is awesome!!
Love your channel, Glen. ✌️
Thank you for the great work you do, I get many idea from your work, With out what you do I could not make many projects.
Excellent craftsmanship as always.
Man I think you and Stone Coat Countertops should do a collab. I think that would be an amazing build, but to be honest I love all your work. Be easy
Thanks, but they are on another level.
@@DIYCreators I don't think you give yourself enough credit, your creativity and relatability makes many of these project seem easy despite the level of difficulty that presents itself, plus much of the work that yo9uyr present to us looks amazing. I think you are more than able to handle that bredren. however I think that you know better than I when it comes to what your capable of, that being said, I am a big fan, love everything I have seen you put together. Your work is amazing, I only wish I had the time to try many of the projects you post.
Nice work! I like it a lot. Definitely would be a good way to refresh an old table with a beat up top!
You slayed this project! INSPIRED!🤩
Hey bro hope you had a great Xmas and New Years. Looking forward to new Tutorials and DIY tips, God Bless hope everything is going well
Beautiful!!. Just love it!!!!
Cape Town
South Africa
Your creativity is on another level. A whole other level. I love what I just saw. I totally do.
Hope all is well 🙏 Merry Christmas to You and your Family 👪 🎅🎄 Really enjoy your channel 😊
I like your style.
Thanks!
My Question is was it necessary to painstakingly glue all the pennies on top at the end, if you were going to pour epoxy over it anyways? I dont think they would have moved
They probably would have moved, they’re lighter than epoxy.
Creative genius young man. Love it.
Glen, this is a very unique and creative design. I love it. Thanks for sharing this video with us.
that came out really cool!
Thank you :)
I was thinking to put them on the epoxy when it got sticky and would have glued itself but this was awesome 🤩
That is a labor of love!
I hope you and your family are ok im praying for you we all miss you and your content
I like it. Thank you.
That was Amazing craftsmanship. 💪🏾
That turned out beautiful
Glen, you're over 3M subs, when are you coming back to us. I miss my Satruday DIY ritual
Hes back
yeh, I will keep your video useful when I will be off grid.
Great job Glenn! I always look forward to your projects.
Hey guys, just saw a RUclips video of an interview that Glen did, they said that he's OK, the name of the channel is - KB Tax Deviser CPAs, they said the interview was recent
Thanks for writing it, this is really good news 🎉
Do you have the link?
Wow Great ! it’s simply beautiful ! 😍
Awesome project! One point to note: Do watch your other hand on the opposite end of the nail gun while shooting the Brad nails in! See from 9:05
it looks absolute money!!
Buddy, you're good. Keep doing your thing.
The guys over at Stone Coat Countertops have great advice for how to pour resin over a tabletop. It's similar to countertops, so no problem there^^
I see there is a lot of recommendation about stone coat, ill have to check them out.
Thanks for sharing!!!! Cool project!!!!!
fantastic Glen, it looks great.
Thank you
hope to see more things from you.
Gorgeous table
talk about a floating coffee table!! 😃
A vacuum chamber is great removes air bubbles 🫧
I have one but I guess I need more practice with it. I didn't have much luck when I used it a while back.
Fantastic idea!
Great job, bro!
Killin it Glen!
Todos os detalhes perfeitos. Gostei muito da ideia vou utilizar algumas técnicas aqui na marcenaria. Seu trabalho tem me motivado bastante muito obrigado Deus lhe abençoe.
Thank you, awesome to hear!
I really enjoy your videos, thank you.
Wow that's awesome. Keep making. God bless.
I absolutely love this
Thank you!!!
@@DIYCreators Mr Glenn, can't tell you how much I'velearn from you Mento, which software do you use to design cabinets? Thank you
Brilliant, Glen! Really beautiful work! 😃
It turned out amazing!
Stay safe there with your family! 🖖😊
Great video, and great project!
Your videos wow me! Do you have any videos or know anyone that does, on epoxying over knick knacks that are gold plated? Will it ruin the paint or gold?. I have some mice knick knacks that belonged to my parents, and one was a gift to me from my dad, he bought for me after I told him my dream with a mouse when I was a child. The ear broke off. After I repaired it I wondered if it was possible to epoxying them into a cube or rectangle to preserve them. Thanks for your awesome videos!
Beautiful
Thank you
Looks awesome
Thanks!
This is next level. Awesome work man!
epic!!!!