Only people who weren't fans of a twin splitter were the ones who couldn't drive it properly, easy fast shifts when used to it and understood how an engine works and rev matched 💪🤣
Very presumptuous comment. 🤣 I've got to say it's the last gear box I'd fit to a lorry. obviously I can drive one as the video proves. Give me a Road Ranger anyday. Being presumptuous my self I'm thinking you know my opinion on these gear boxes already? Love your handle by the way. 🤣
in my opinion the twin splitter was the best. For not loosing power dropping a gog going up hill. And the old road ranger comes close second. Have you still got the E series. I've had MANs with the twinsplitter box and a iveco eurostar Daf 85 aswell as fodens and erf. we fitted a twin splitter into a foden alpha after we had issues with the Eaton 16 speed
E 14 with 365 cummins pulling full weight along the a71 snaking and bending at night, driving it properly was such a satisfying and enjoyable experience I was 23 years old 1998
Yeah, the cheap old plastic pigs. Really common among the oil companies as they came adr spec as standard. I work for a major oil company and knew plenty of bp drivers who were glad to see the back of these plastic pigs. When they changed to Scania with auto transmission they were jumping for joy. If ERFs were any good they'd still be here along with foden, Leyland etc.
A Cummins/Eaton being worked .. sounds better than any swedish v8 crap that sounds like its broken the day it leaves the factory.. FACT .. My EC14 ROMPED & I mean ROMPED all over Wiggesworths 164 on that climb off the M1 onto the M6. It was a nightly duel lol.. No idea who he was but.. bad luck fella.
I used to drive an erf e14 big cam 365 eight wheeler in the early nineties on a g plate . Had some umph you could accelerate past cat 400s .only problem was it had same prop as the e10 and if you got stuck in a sandpit or soft mud it would screw the prop off .
Thanks for your comment and I hope you enjoy the video's? I'm more of a 13 or 18 speed Fuller Fan my self, I like to know the thing is definitely in gear when I put it in gear.🤣
What was all this about? Yes, I drove an Eaton twin splitter but given the choice, the Fuller was a far better box by a Country mile! I had ERF's with 290's and 320's and also had 265 RR B Series and previously A Series with 250 Cummins but the Fuller box in all of them. My experience of the Eaton was that you had to concentrate too much on what you were doing, listening to engine constantly to pick out your gearchange. That's a pain in the ass compared to the ease of a Fuller. Do you remember Agency drivers efforts on an Eaton? I do, they were baffled and unsafe to drive them! Caught out of gear too often and in dangerous situations. THAT IS THE REASON EATON'S WERE GIVEN THE BOOT! The men that matter, Employers came to the conclusion that they were too difficult to drive for younger drivers! You can keep the Jake brake and your Eminox . I loved my Erf but later preferred my Volvo F10 for peace and quiet AND COMFORT!
Said every man who couldn't drive a twin splitter 😘🤣 Ask any technician the fuller was definitely not better it was only better for people who couldn't drive a twin 👍
Even though I drove Eatons for a long time I still got caught out occasionally. I was ascending a very steep hill, in the wet, with a full load and down changed into too high a gear and so losing all momentum. I couldn't get any traction to move from rest and had to reverse a quarter mile left hand bend to start from the bottom; luckily it was just after midnight and there was no traffic. The other great joy was when the gear knob detached ( happened to me several times).
Thanks Tony, this is a cracking wagon I can't say as I'm a fan of a Twin Spliter tbh, I prefer a Road Ranger of any variety. You can't beat a 14ltr Cummins though.👌
No it's not, it was new to Ackworth Transport and ran 24/7 for 7 years. It then passed to Mines Rescue and then myself in 2016 once all the Coal Mines closed.
@@johnyjakebrake5825 Ackworth and Onward transport is a name from the 70s ok, lots of Leyland Tractor units,much speed on old A1 down from Edinburgh along with Charles Alexander's Leylands hauling fish on ice on flat trailers in a big hurry before melting....
@@johnyjakebrake5825 ... well you look after that hard working girl Johnny ....I had my first ERF about '94 with Railfreight Distribution British Rail ....Fell in love .....Then we got the Fodens with the Celect engine on the fly by wire .... You'd be halfway through a roundabout before the yoke would start pulling .... Everyone wanted their ERF's back
@@johnyjakebrake5825 ok , its a way of life, it is not easy to keep a rig in good conditions, pay the bills etc etc. Go on , drive safe, be proud of you.
@@johnyjakebrake5825 14 Ltr Manual pump EC 14 pal. I’ve a yard of ERF Stuff I’m doing an EC 14 Olympic for a mate it Needs Jakes on her. New ERF Club forming up “ERF EIRE”
Wow that brings back memories ! he certainly knows how to use that box !
Only people who weren't fans of a twin splitter were the ones who couldn't drive it properly, easy fast shifts when used to it and understood how an engine works and rev matched 💪🤣
Very presumptuous comment. 🤣 I've got to say it's the last gear box I'd fit to a lorry. obviously I can drive one as the video proves. Give me a Road Ranger anyday. Being presumptuous my self I'm thinking you know my opinion on these gear boxes already? Love your handle by the way. 🤣
I can actually drive one and spent a considerable amount of time wondering why it was ever created 😳
Fact……! Loved my ERF with the Twin splitter, one you mastered it😍
in my opinion the twin splitter was the best. For not loosing power dropping a gog going up hill. And the old road ranger comes close second. Have you still got the E series. I've had MANs with the twinsplitter box and a iveco eurostar Daf 85 aswell as fodens and erf. we fitted a twin splitter into a foden alpha after we had issues with the Eaton 16 speed
@@fatlad5090 sold it buddy? Bloody good lorry this E series and will be missed.
Gorgeous truck. Still looks good today. The E series cab styling was way ahead of its time and the Cummins 10 and 14 litre engines sounded amazing.
E 14 with 365 cummins pulling full weight along the a71 snaking and bending at night, driving it properly was such a satisfying and enjoyable experience I was 23 years old 1998
I HAD A 350 CUMMINS IN MINE.
Drove these for BP in 2000/2001 and am now nearly totally deaf, says it all really.
Exhaust under the front you would be. Still at least you went Deaf to a decent sound track.🤣
What did you say?🤣
Yeah, the cheap old plastic pigs. Really common among the oil companies as they came adr spec as standard. I work for a major oil company and knew plenty of bp drivers who were glad to see the back of these plastic pigs. When they changed to Scania with auto transmission they were jumping for joy. If ERFs were any good they'd still be here along with foden, Leyland etc.
Nothing sweeter than a 14ltr, and that Jacob’s thunder😎
A Cummins/Eaton being worked .. sounds better than any swedish v8 crap that sounds like its broken the day it leaves the factory.. FACT .. My EC14 ROMPED & I mean ROMPED all over Wiggesworths 164 on that climb off the M1 onto the M6. It was a nightly duel lol.. No idea who he was but.. bad luck fella.
Sounds way much better than the Scanias V8
Both great sounding engines. 👍
Cummins L10 , 14 Big cam , 2 , 3 , 4 , N14 , forever ❤️ cummins forever ❤️, ooooooooooh! Yeaaa !
I used to drive an erf e14 big cam 365 eight wheeler in the early nineties on a g plate . Had some umph you could accelerate past cat 400s .only problem was it had same prop as the e10 and if you got stuck in a sandpit or soft mud it would screw the prop off .
My old seddon with her jake break sweet music ahhh for the good old days who needed a radio 📻 😂😊
Love the truck, love the engine's sound, more of these video's please, ❤❤
What a great sounding engine 👍🇬🇧
The coal board used to use them in similar colours in my area ......good memories
Hi Jason
It's actually an ex Mines Rescue vehicle I've not painted it just a few acoustic modifications.😃
Good engine Sound..music to my ears
Sounds bloody lovely John.
Cheers Johnny.
very nice to see, best regards, good luck
thanks for this nice video
ERF Cummins Eaton twin split jake brake Rockwell a unbeatable combination 👍💪😎
Thanks for your comment and I hope you enjoy the video's? I'm more of a 13 or 18 speed Fuller Fan my self, I like to know the thing is definitely in gear when I put it in gear.🤣
What was all this about? Yes, I drove an Eaton twin splitter but given the choice, the Fuller was a far better box by a Country mile! I had ERF's with 290's and 320's and also had 265 RR B Series and previously A Series with 250 Cummins but the Fuller box in all of them. My experience of the Eaton was that you had to concentrate too much on what you were doing, listening to engine constantly to pick out your gearchange. That's a pain in the ass compared to the ease of a Fuller. Do you remember Agency drivers efforts on an Eaton? I do, they were baffled and unsafe to drive them! Caught out of gear too often and in dangerous situations. THAT IS THE REASON EATON'S WERE GIVEN THE BOOT! The men that matter, Employers came to the conclusion that they were too difficult to drive for younger drivers! You can keep the Jake brake and your Eminox . I loved my Erf but later preferred my Volvo F10 for peace and quiet AND COMFORT!
Said every man who couldn't drive a twin splitter 😘🤣
Ask any technician the fuller was definitely not better it was only better for people who couldn't drive a twin 👍
Even though I drove Eatons for a long time I still got caught out occasionally. I was ascending a very steep hill, in the wet, with a full load and down changed into too high a gear and so losing all momentum. I couldn't get any traction to move from rest and had to reverse a quarter mile left hand bend to start from the bottom; luckily it was just after midnight and there was no traffic. The other great joy was when the gear knob detached ( happened to me several times).
Give me more!! 😝 More vids please!!
Music 💪💪 had a few here im Ireland
The dogs!
🇬🇧🇬🇧🇬🇧💨💨💨💪🏼💪🏼💪🏼
Is this the same truck Hammond drove in the Top Gear on the lorry episode??
No it's not, if memory serves that was an EC?
Why no industrial launguage??? Sounds sweet..
🤣 less chat more action.
Pisses all over a Volvo with i shift. Not everyone can use them, but you cant beat an Eaton twin splitter. Beautiful wagon, just listen to it
Thanks Tony, this is a cracking wagon I can't say as I'm a fan of a Twin Spliter tbh, I prefer a Road Ranger of any variety. You can't beat a 14ltr Cummins though.👌
@@johnyjakebrake5825 Yeah, got to admit, Fullers a good box too. 👍
Is that an old whitam plant hire unit from essex
Hi
No, it's ex Onward Transport then Mines Rescue and then me.
beast sound !! but is legal the sound of jake brakes on UK ?? 👍
Yes totally legal sound isn't measured on MOT yet in the UK.
@@johnyjakebrake5825 ok, thanks 😉
What a sound 🇬🇧. Is some of this filmed heading into Stocksfield?
sounds mint that does 👍
bet it wouldn't pull you out of bed though😂😂
The old N14 Cummins pulls well all be it only 320 HP, she digs in and lugs down. 👌
That erf will pull better than any new lorry of today, fact.
@@adrianbellemy4420 yes raw uninterrupted power!👌
ruclips.net/video/TyNP_KyRGLg/видео.html
Nice video
Is that one of the old JCB trucks ?
No it's not, it was new to Ackworth Transport and ran 24/7 for 7 years. It then passed to Mines Rescue and then myself in 2016 once all the Coal Mines closed.
@@johnyjakebrake5825 Ackworth and Onward transport is a name from the 70s ok, lots of Leyland Tractor units,much speed on old A1 down from Edinburgh along with Charles Alexander's Leylands hauling fish on ice on flat trailers in a big hurry before melting....
@@joyyoung4482 yes, I believe this ran paper one way but can't remember what else it carried, it was on a regular job.
@@johnyjakebrake5825 ... well you look after that hard working girl Johnny ....I had my first ERF about '94 with Railfreight Distribution British Rail ....Fell in love .....Then we got the Fodens with the Celect engine on the fly by wire .... You'd be halfway through a roundabout before the yoke would start pulling .... Everyone wanted their ERF's back
@@johnbarry4562 she might be For Sale soon, she's been replaced with a big 525 celect.🤦♂️
Bloody good Lorry this though.👌
All auto crap now good ol days long gone I’m out of it now thank fuck
Are you paid to have fun?
Lucky man.
No unfortunately not! It ain't luck it's costs us alot of money it's our hobby but we love it, it's what we do. Thanks for your comment.
@@johnyjakebrake5825 ok , its a way of life, it is not easy to keep a rig in good conditions, pay the bills etc etc.
Go on , drive safe, be proud of you.
@@juancaorsi1805 thank you . Its definitely a way of life, enjoy the videos loads more to come later in the year.👍
I’m looking for a Set of Jake’s if anyone can help me out their
@@darrenfarrell-bn2cb for what Engine buddy?
@@johnyjakebrake5825 14 Ltr Manual pump EC 14 pal. I’ve a yard of ERF Stuff I’m doing an EC 14 Olympic for a mate it Needs Jakes on her. New ERF Club forming up “ERF
EIRE”
Are you sure that N14 has Jacobs Brakes or C-Brake made by Cummins for Cummins ? By the way it's an exsaust brake and not everything is "Jake" brake.
😂 yes I'm sure it's a Jake Brake I fitted it. I'm also aware of the difference between a Jake Brake and an exhaust Brake. Thanks for your comment.