I really do appreciate the detailed step-by-step instructions on this install. I’m excited about this head-unit and can’t wait to get mine. The entire collection is really easy to navigate.
We recently installed ours and LOVE it! We followed the directions in this video exactly as shown and the install couldn't have gone smoother. The written instructions were good too, but would have been a little more difficult without the video.
I’m installing my new radio today. Few things missing from the video. Nowhere in the instruction manual or the video about the Installer code needed to turn on your cameras and other settings. Found it on another video by chance. 0052
Hi, Once you removed the original radio you disconnected a gray small plug, and once you install the heigh10 head unit you didn't connect this gray plug again, please advise the use of this plug
That connector is for the factory microphone to connect to the original radio. It is not able to be retained with an aftermarket radio and the connector does not need to be hooked to anything after the new radio is installed.
@@Stinger.Solutions Thank you for answering. I had the same question. If I fade all the way to the rear, I lose virtually all sound. I was wondering if I missed something so I was hoping to find the answer for that plug. If you see this, is it expected for all the speakers to be on the front channel with a factory alpine amp? I can’t fade to the rear or adjust the subwoofer. 🤷♂️
So not reusing the existing mic/xm/gps? I have a vector e-dock, presumably this will interfere with your proposed gps mounting location? Overall I think this seems like a much better replacement than your previous radio option, I may actually buy this one.
Just received my heigh10 and plug-and-play install kit. It did not come with the “USB UN 3” usb adapter that connects to the factory cable that gets unplugged from the uconnect module. Is this no longer provided?
Is there a phone integration between the controls on the steering wheels with the Stinger Heigh10? How do you program those controls to work with the head unit?
Will you be doing a video on the integration upgrade kit for the people who already have the Heigh10 radio? I already have the Heigh10 for my 15 Jeep JK, and just purchased the integration kit.
The aftermarket camera power pigtail shown just before the 8 minute mark is where you will power your additional camera(s). You can either use a bullet connector on the new camera wiring to plug in to them, or clip the bullets off the JK11 harness and solder or crimp the wires to the main harness.
@@Stinger.Solutions thank you, got It installed yesterday! Just need to figure out how to get the auto dimmer and button backlights to work. Not in sync with the headlights for some reason
CarPlay and Android Auto sources require the smartphone being used be connected to the USB full functionality. Alternatively, you can do basic audio streaming and handsfree calling via Bluetooth.
So I've run into a problem with my system. I had to run all new speaker wiring because the previous owner wired all 4 speakers onto 1 channel. With that being said, I have to use the other harness provided but don't know how to wire it, any help is appreciated
It would be better if you called in when you are in the vehicle so we can help you troubleshoot this issue. There are too many variables to diagnose via chat or email. The number is 727-592-5991 and we are open from 9AM-8PM EST M-F Be sure to use the callback feature when prompted. Thanks!
Apps cannot be installed directly to the radio itself. CarPlay and Android Auto compatible apps will be available when you are in either of those sources on the radio, and have a smartphone connected to the USB port.
The HEIGH10 radio uses the SE-P14 navigation card from iGO Navigation, linked below. stingeroffroad.com/products/igo-navigation-card?_pos=1&_sid=d1148c081&_ss=r Read less
Android Auto and Apple CarPlay functionality requires the device being used be connected to the USB port of the radio. Alternatively, you can do basic audio streaming and handsfree calling via Bluetooth.
This kit is now at the best pricing available! For more information, click here: bit.ly/3rGOW1o
Does the offroad screen work with a 2016 tacoma trd
I love how they keep adding features to the JK and how indepth and detailed their installation is. I love my radio and can't wait to add this
Just installed mine and it is amazing!!! Such a huge step up from factory!!
Cannot wait to add more Stinger products to my vehicle!!!
Absolutely the best electronic upgrade for the JK! With ridiculously easy installation instructions!
This is the radio everyone needs to be part of their Jeep.
That's what I like about you guys, you do install videos and the instructions that come with your products have been top notch!
This is really neat to see how this is installed. We had it installed by someone so it’s cool to see the steps of it going in.
I cannot WAIT to get the HEIGH10 for my JLU! This is such an awesome kit and I love that it's all plug and play!
This install video made the installation of my HEIGH10 a breeze. Thank you Stinger Off-Road for going the extra mile!
I really do appreciate the detailed step-by-step instructions on this install. I’m excited about this head-unit and can’t wait to get mine. The entire collection is really easy to navigate.
Perfect timing! It's literally in my cart, I can't wait to get my hands on one!
This is an amazing dyi video. Comprehensive, easy to follow and well edited. Nice job.
Thank you very much!
This is a perfect kit for any JK owner out there. I am looking forward to getting mine installed.
Install looks like a walk in the park and seems so worth it for the money!
This install was so easy. Love that you don't have to cut the dash (or ANYTHING), unlike the original radio I wanted from Alpine.
Great detailed step by step install! Can’t wait to do this upgrade
Super easy install instructions and hands down best radio upgrade out there for the JK’s
Mine was delivered yesterday! Cant wait to install today!
We recently installed ours and LOVE it! We followed the directions in this video exactly as shown and the install couldn't have gone smoother. The written instructions were good too, but would have been a little more difficult without the video.
I can't wait to upgrade mine with the new features. I love it so far
I can’t wait to install my new head unit! With these videos it should be nice and easy. I live all the added off road features it has. ❤
I love the walk through! Thank you so much for these DIY videos!
I cannot wait to get this upgrade. I love my Heigh10.
Oh yeah baby! I’m getting mine soon! 🎉 Can’t wait to show it off
This is amazing, game changer for the JK
This is a must have for any radio upgrade made to a jeep
This is on the wishlist for our JKU.
Now that I’ve got my new system I’ve got to coordinate an install 🤩
Install look easy, and great step by step video. Can wait to put mine in.
Wow really cool upgrade can't wait to get mine!
Got this head unit last year for my JK they just came out with the Offroad page upgrade I just ordered the kit to install on my headunit.
This is such an awesome radio I want one for my Tacoma soon
Can’t wait to get this in my JKU!
Nice step by step install
Great video. I LOVE my HEIGH10 in my JK. Make sure to get the blind spot cameras!!
Such a crazy upgrade!
looking to get this for my 2015 jk! the detailed step by step helps alolt! Thanks guys!
Im excited to get this done in our Jeep 🤘🏽
what a good-looking functional Product. 🔥🔥
Definitely need one of these for my
JK.
What do I have to remove when the Uconnect module is located behind the little net area below the climate control system?
I’m installing my new radio today.
Few things missing from the video. Nowhere in the instruction manual or the video about the Installer code needed to turn on your cameras and other settings.
Found it on another video by chance. 0052
These videos are definitely helpful!
Can’t wait to get my Height 10
Cannot wait to get this soon!! ❤❤
Hi,
Once you removed the original radio you disconnected a gray small plug, and once you install the heigh10 head unit you didn't connect this gray plug again, please advise the use of this plug
That connector is for the factory microphone to connect to the original radio. It is not able to be retained with an aftermarket radio and the connector does not need to be hooked to anything after the new radio is installed.
@@Stinger.Solutions Thank you for answering. I had the same question. If I fade all the way to the rear, I lose virtually all sound. I was wondering if I missed something so I was hoping to find the answer for that plug. If you see this, is it expected for all the speakers to be on the front channel with a factory alpine amp? I can’t fade to the rear or adjust the subwoofer. 🤷♂️
Awesome install
I would LOVE to do this upgrade!
So not reusing the existing mic/xm/gps? I have a vector e-dock, presumably this will interfere with your proposed gps mounting location? Overall I think this seems like a much better replacement than your previous radio option, I may actually buy this one.
The Vector dash mount will clear both the RB10JK11B and RB10JK11K radio replacement options, as they both utilize the same flush mounting plastics.
Just received my heigh10 and plug-and-play install kit. It did not come with the “USB UN 3” usb adapter that connects to the factory cable that gets unplugged from the uconnect module. Is this no longer provided?
Is there a phone integration between the controls on the steering wheels with the Stinger Heigh10? How do you program those controls to work with the head unit?
The module I got was rp4-ch11….
Will you be doing a video on the integration upgrade kit for the people who already have the Heigh10 radio? I already have the Heigh10 for my 15 Jeep JK, and just purchased the integration kit.
Stay tuned...
I want this radio so damn bad
So to install side and front facing cameras, do we attach ground and power to a bullet connector?
The aftermarket camera power pigtail shown just before the 8 minute mark is where you will power your additional camera(s). You can either use a bullet connector on the new camera wiring to plug in to them, or clip the bullets off the JK11 harness and solder or crimp the wires to the main harness.
@@Stinger.Solutions Roger that. Do the side cameras trigger with the turn signal automatically?
Yes, the side cameras can be manually activated, or trigger automatically with the turn signals
@@Stinger.Solutions thank you, got It installed yesterday! Just need to figure out how to get the auto dimmer and button backlights to work. Not in sync with the headlights for some reason
There are so many different versions. Which one is plug and play and comes with the Jeep info and flush mounting hardware?
Hello, this depends which vehicle you're looking to fit. Please call us at 1-800-477-2267 EXT: 2285 for further assistance.
Im getting this for my JK it seems worth it im gonna get it with all cameras
Just wish stinger would update xm radio album art info
Can you watch RUclips or videos while the car moving?
Video is only shown on the screen when the vehicle is stationary.
Does the unit support wireless apple carplay?
CarPlay and Android Auto sources require the smartphone being used be connected to the USB full functionality. Alternatively, you can do basic audio streaming and handsfree calling via Bluetooth.
So I've run into a problem with my system. I had to run all new speaker wiring because the previous owner wired all 4 speakers onto 1 channel. With that being said, I have to use the other harness provided but don't know how to wire it, any help is appreciated
Hello, please contact our technical support department at 1-800-477-2267 EXT: 3333 for further assistance.
Great video!
Recently installed, all of my off road functions say calibrating and won’t function?
It would be better if you called in when you are in the vehicle so we can help you troubleshoot this issue. There are too many variables to diagnose via chat or email. The number is 727-592-5991 and we are open from 9AM-8PM EST M-F Be sure to use the callback feature when prompted. Thanks!
Not the same unit or instructions
Right! This is horrible. I don’t know why they would change it.
Can I use this with a Aftermarket Amp?
You sure can and we offer aftermarket audio products as well. Click the product link in the video description for more info 🙂
Planning this soon
The flame is my background in my JL
Does this radio run android apps directly?
Apps cannot be installed directly to the radio itself. CarPlay and Android Auto compatible apps will be available when you are in either of those sources on the radio, and have a smartphone connected to the USB port.
Which nav sd card is best for this radio?
The HEIGH10 radio uses the SE-P14 navigation card from iGO Navigation, linked below.
stingeroffroad.com/products/igo-navigation-card?_pos=1&_sid=d1148c081&_ss=r
Read less
Is it too bright at night?
The radio has brightness settings for both day and night that are user customizable.
Jk life baby
Is it wireless Android Auto?
Android Auto and Apple CarPlay functionality requires the device being used be connected to the USB port of the radio. Alternatively, you can do basic audio streaming and handsfree calling via Bluetooth.
Amazing!
A lot commenters "can't wait" to get this installed in their JK....hmmmm
😊💖
Don’t waste your money on this crap. Constant screen freezing. Horrible resolution. Over priced
At what point should I install the front and rear cameras? I don't want to have to take things back apart if I can help it.
Hi there, please contact our technical support for technical questions at 727-732-3314