Really clear instructions, thank you. Once I’d realised my controller had been left with flat batteries and changed them, I could follow your guide and get everything saved. Thanks again, from a technophobe in recovery.. 😊
Really good instructional vid. I found another before seeing this and it wasn't as comprehensive. This went back to basics, ie, starting with setting the time and day. Thank you so much for spreading the knowledge.
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
I’m a bit confused by this. In my dad’s house, when I manually adjust the thermostat to 24 degrees Celsius, it only increases very slowly from 15 degrees, reaching about 16.5 degrees, but never the 24 degrees I set. Why is this happening? Why doesn’t it just increase to 24 degrees to better heat the home? I’m wondering if I’m misinterpreting the situation because it could be warmer in my dad’s house. Sometimes, the temperature just stays around 15-15.5 degrees, which isn’t very warm. I’m not sure if I’m doing something wrong or misunderstanding the situation. Does anyone have any advice?
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly we also have updates on our new trainings.facebook.com/groups/167070231326174
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Hi, I've got the same make of thermostat but it has less buttons. I can use it but it has started to turn back on when I turn it off. What could be the problem. It seemed to be working fine but now it's unreliable. I use it in manual mode by the way. Thanks in advance.
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Hi we have just moved into a new build with the Honeywell c707. My old programmer was so simple to use this is confusing me. We only want the heating to come on twice a day 6.30 to 8.30am and 5.15 to 9.30pm how do I do this ? Your help would be appreciated
I must be missing something. I cannot seem to get it right in auto. The heating keeps firing up even though the ambient temperature is above the programmed temp, even though I have if I set quite low and it is starting and continuing beyond the set times. I am wondering if it would be better to just use the manual setting ? ....
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Morning, I'm struggling to program the device. I can set program 1, but when it moves to program 2, 3 and 4 there are no numbers, only dashes. How to I fix this? Thanks
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
This has helped me so much!!! It’s getting cold and needed to sort this out. Only problem is I think mine is not reading the right temperature. Last night I was a block of ice, and it said it was 19 degrees... what happens if the reading of the temperature is off?
Hello. I had a man come out to fix my boiler as the hot water was running Luke warm. After he left I've realized my heating isn't working. It's as if the remote isn't linking to the boiler. Is there a way I can link it back please without having to call him back out. Thank you
@@ARBoilers because I also have another device on wall with small buttons it’s on and off by green or red but I don’t know properly how to operate that device that mention in video now I know but want to turn off or disconnect
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Hello Tony, not sure if you will see this question or not but here's hoping. I need to adjust our heating so it comes on automatically when the temperature drops below 20, but I need to make sure it does it automatically without having to be done manually on the controls. I have set the other control to be on constant( the one in the cupboard) but the control unit (this one you have shown here) doesn't seem to shut off the heating and it is going up to 21.5 or even 22. I am having to manually turn it off when it gets too hot or on when it drops to less than 20. Please can you help ?
For heating to come on ,does it mean for example if temperature set to 20 degrees the heating won't come on until it reaches that set temperature?Or is that the temperature the central heating will be at the set times for coming on and if it goes over that temperature it will turn off?
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
After doing all this, temperature goes back to 21 which is beyond understanding, when you set it up to fire back on 16, how come it sets itself to 21 or 22
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Still confused by your grammar. Will the heating turn on when it gets to those temperatures or will it come on at 6.30am and then go up to whatever temperature it's been set to?
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Sometimes, they can go out of calibration. If so, you have to replace the unit. Hopefully, that was useful. Also can you please subscribe to our channel
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
I noticed when I was doing this, the temperature went up on the clock because of the heat from my hand, i set it whilst it was sitting on the table lol.
@zjay7683 Take out the batteries for a minute. Them put them back in turn down the thermostat to 10 degrees then turn back up to 28 degrees and see if it reconnects. Also can you subscribe to our channel
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Thank you so much! Just bought a house with this thermostat and couldn’t even set the right time before!
Really clear instructions, thank you. Once I’d realised my controller had been left with flat batteries and changed them, I could follow your guide and get everything saved. Thanks again, from a technophobe in recovery.. 😊
Thank you for your comments and can you please subscribe to our channel 😊
@@ARBoilers Good idea! I will.
Really good instructional vid. I found another before seeing this and it wasn't as comprehensive. This went back to basics, ie, starting with setting the time and day. Thank you so much for spreading the knowledge.
Easy to follow due to the clarity of the presentation Brilliant! Thank you.
Thank you ! Very clear, easy to follow, calm paced video. My control was driving me crazy ... now sorted thanks
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Thank you! We just couldn't figure it out. Really clear instructions and your voice, very calming.
I’m a bit confused by this. In my dad’s house, when I manually adjust the thermostat to 24 degrees Celsius, it only increases very slowly from 15 degrees, reaching about 16.5 degrees, but never the 24 degrees I set. Why is this happening? Why doesn’t it just increase to 24 degrees to better heat the home? I’m wondering if I’m misinterpreting the situation because it could be warmer in my dad’s house. Sometimes, the temperature just stays around 15-15.5 degrees, which isn’t very warm. I’m not sure if I’m doing something wrong or misunderstanding the situation. Does anyone have any advice?
Thank you for thee really easy, clear instructions, just what I need.
When I programme my themostat all of the timings work except for the last one , meaning my heating doesnt switch off. Help!
I am having the same issue with slot 3. Did you ever find the route of the issue? Cant find a reset button either
Hi see if the temp drops below 16, and the heating comes back on, how long will the heating stay on?
Thanks Tony, very clear, I was confused about the ‘off’ temperature. Sorted now, thank you! 🙏
Brilliant video. Slow enoughto follow along and nice and clear video and instructions. This helped me sort out my timing.
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly we also have updates on our new trainings.facebook.com/groups/167070231326174
Thank you. It is very clear and easy to understand.
Absolutely Spot on thank you very much much easier than the manufacturers manual 👍
Very useful video, many thanks ! Clear video.
Thanks got that and how do I just get hot water in summer for baths
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Hi, I've got the same make of thermostat but it has less buttons. I can use it but it has started to turn back on when I turn it off. What could be the problem. It seemed to be working fine but now it's unreliable. I use it in manual mode by the way. Thanks in advance.
Really helpful and clear explanation, thank you. Jay
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
When ive set the time and temperature for programme 1 and go to programme 2 the screen just shows ------ and I can't adjust the time
Thank you, very helpful and clear!
super clear and helpful, great pace, thank you!!
Thank you for your comments and can you please subscribe to our channel 😊
The reading temperature is it for a room or a house and how does it read thr temperature
Hi how do you repair this to boiler as mine doesn’t seem to connect even when changing batteries
Hi we have just moved into a new build with the Honeywell c707. My old programmer was so simple to use this is confusing me.
We only want the heating to come on twice a day 6.30 to 8.30am and 5.15 to 9.30pm how do I do this ? Your help would be appreciated
Make sure the temperature on times are at about 22 degrees and off times are at 15 degrees
I must be missing something. I cannot seem to get it right in auto. The heating keeps firing up even though the ambient temperature is above the programmed temp, even though I have if I set quite low and it is starting and continuing beyond the set times. I am wondering if it would be better to just use the manual setting ? ....
How to change the battery?
❤
Very well instructions.
Nice one, mine kept coming on in middle of night, the last temp for each is the off temp so sorted thanks to this vid
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Cheers mate, had the same problem you just fixed it. Thanks guys.
Brilliant, the plumber who installed the system didn't leave an instruction book. Now I know exactly what to do.
That's what we like
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Hi!! Amazing vid! Does this mean if my temperature drops below the low temperature I've set it, my heating will come on
Yeah
Morning, I'm struggling to program the device. I can set program 1, but when it moves to program 2, 3 and 4 there are no numbers, only dashes. How to I fix this? Thanks
It works in conjunction with the box in the wall. The green LED will flash with when you the room thermostat
Is there no boost button?
Thanks that was very informative much appreciated 😊
Hi may ask could you subscribe to our channel 😊
Thanks so much but how do I stop my heating coming on through the night when we're asleep?
Did you figure it out and also how to cancel mornings?
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
This has helped me so much!!! It’s getting cold and needed to sort this out. Only problem is I think mine is not reading the right temperature. Last night I was a block of ice, and it said it was 19 degrees... what happens if the reading of the temperature is off?
Just use the up arrow to turn on the boiler
Hello. I had a man come out to fix my boiler as the hot water was running Luke warm.
After he left I've realized my heating isn't working. It's as if the remote isn't linking to the boiler. Is there a way I can link it back please without having to call him back out. Thank you
What do I do if I wanted to put the heating on then at the time. Do I set it on the day and time
Just set the first on in the morning and set 2nd off at night time. Also could you subscribe to our channel 🙏
Well articulated
How we disconnect this device from the boiler please tell me me
Why do you want to disconnect it?
@@ARBoilers because I also have another device on wall with small buttons it’s on and off by green or red but I don’t know properly how to operate that device that mention in video now I know but want to turn off or disconnect
Thanks 👍 saved the day.
Thank you for your comments and can you please subscribe to our channel 😊
Hey, I followed the instructions and the torch did not appear on my device and it did not work, how do I connect it to the heating to make it work
Turn off the power take the battery and start again
Thank you for your comments, and can you please subscribe to our channel
When I go to 2 or 3 or 4....the date n time doesn't come up on the screen
Thank you very much
You're welcome. Did you should subscribe to our channel?
Great instructions many thanks!
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Brilliant thank you :)
Very helpful
Why is it not working for me? I don't understand what is the temperature settings for it to come on
The temperature on the on setting must at least 21 degrees and the off temperature should 14 degrees. And can you subscribe to our channel 😊
@A+R Central Heating and Boiler Repair Experts Ltd is that the first set of numbers or the first and yes I've subscribed
Yeah its the first set of numbers
@A+R Central Heating and Boiler Repair Experts Ltd yes I'm struggling with it and it won't come on at all now
You can give me call tomorrow after 1.00 pm 0797 3325384
Thank you veryhelpful
Thank you for your comments and can you please subscribe to our channel 😊
The programme 2 (thermostat off) is showing blank digits.
But how do I set it manually? I just want to alter it without programming it. I can’t seem to Get it to stay on what temperature I want.
Just set it to manual and adjust up and down temperature buttons
Thanks mate
Hello Tony, not sure if you will see this question or not but here's hoping. I need to adjust our heating so it comes on automatically when the temperature drops below 20, but I need to make sure it does it automatically without having to be done manually on the controls. I have set the other control to be on constant( the one in the cupboard) but the control unit (this one you have shown here) doesn't seem to shut off the heating and it is going up to 21.5 or even 22. I am having to manually turn it off when it gets too hot or on when it drops to less than 20. Please can you help ?
Send me your email to tony@engineerteam.co.uk with your mobile and I will call you
legend cheers very clear to the point vid
Hi. How do you set it up so it is constantly at 22 degrees 24 7 please
Just adjust the timer from 6.00 am to 12.00 am the 2nd on from 12.30am to last off 5.30 am
@@ARBoilers Thanks😊👍
For heating to come on ,does it mean for example if temperature set to 20 degrees the heating won't come on until it reaches that set temperature?Or is that the temperature the central heating will be at the set times for coming on and if it goes over that temperature it will turn off?
It's the temperature that ultimately turns off the heating
@@ARBoilers Thanks so if temperature set to 20 degrees if it went to 21 or more the heating would go off?
Thank you for your comments and can you please subscribe to our channel 😊
Excellent! Many thanks :)
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Thank you for your comments and can you please subscribe
After doing all this, temperature goes back to 21 which is beyond understanding, when you set it up to fire back on 16, how come it sets itself to 21 or 22
That is the reading temperature of the room. Also, could you subscribe to our channel?
Thank you for your comments and can you please subscribe to our channel please 🙏🏽
since the clocks went forward I reset the times and now its not working it dosnt even work on Manuel
what do I need to do
View what it says on the unit and email to tony@engineerteam.co.uk
Video what it displays on the screen and email it to me please
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Hi Paulette did you solve this problem? Im having a similar issue currently
Still confused by your grammar. Will the heating turn on when it gets to those temperatures or will it come on at 6.30am and then go up to whatever temperature it's been set to?
It will come at time set as long as the ambient temperature is lower than the set temperature on the thermostat
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
perfect life saver thanks again
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
I can not switch off my heating system.timer is not working.there is no switch to turn off in boiler
Wat do I do
Whats the make and model of your boiler
Worcester boiler
Thank you for your comments and can you please subscribe to our channel
I turned my heat to be 28 in manual mode but it keeps returning to 21?
The 21 degree your referring to this is the room temperature
But how do you bind it?
Just take out the batteries and refit them and it should auto pair up
@@ARBoilers mine is a replacement. Is there a way to repair to a new device? 🙏🏼
@@82517 thats the only way or it could be faulty
Thank you for your comments. Also could you subscribe to our channel
Sometimes, they can go out of calibration. If so, you have to replace the unit. Hopefully, that was useful. Also can you please subscribe to our channel
You may have to replace it or see if you can download the instructions. Also, can you subscribe to our channel
Can u connect Alexa too this
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly facebook.com/groups/167070231326174
Thank you for your comments also can you subscribe to our channel
I noticed when I was doing this, the temperature went up on the clock because of the heat from my hand, i set it whilst it was sitting on the table lol.
😂😂
Thanks for the comments. Could subscribe to our channel?
Slightly confusing, you set the time and day to Thursday, after you set the times, It went back to Monday.
It only reads the temperature of the room.what it is in. Can you subscribe to our channel
@zjay7683 Take out the batteries for a minute. Them put them back in turn down the thermostat to 10 degrees then turn back up to 28 degrees and see if it reconnects. Also can you subscribe to our channel
The thermostat could be faulty. Also could you subscribe to our channel
Hi Diane, you may the off temperature to high its😂should be about 15 degrees. Also, can you subscribe to our channel, please 🙏🏽
On the first part you did well. At last you talked too much, very difficult to undetstand.
Thank you for your comments
Can't hear this properly. Awful demo just like all the others I've heard
Thank you for your comments
Would of been good to add where the battery goes …totally useless information when the battery is no good
Dont think u know urself what to do
Thanks for your comments
It seems like your thermostat is faulty. Also, can you subscribe to our channel
How do you bind this to your boiler?
Thank you for your comments and can you please subscribe to our channel 😊
Hi, how do you pair this if it looses connection? Thanks
Thank you for your comments and can you please subscribe to our channel