You are right, teamx360.co.uk shut down - you can get the timing files in my jrunner package linked on this video: ruclips.net/video/qKJBLxJaYWg/видео.html
Oh, thank you bro. But I have a question: Does ace v3 is usable in rgh 1.2 installation? I saw many videos of installation but cant find 1.2 timing files for ace v3.
TheWeekendModder Could I use this same method but use the jr programmer instead of the x nand or do I have to use the matrix glitcher chip if I use the jr runner
About to RGH my first console, this tutorial was perfect & has inspired a lot of confidence in me, especially with how daunting this stuff initially sounds. Subscribed!
@@Austin-qg2sv I did it! It worked! Be sure to join the discord server for Xbox 360 modding. I Don't have the link off hand but you can find it on Google.
@@shatterpointgames sickkkk thanks for the reply, I just simmered down on my OG xbox modding addiction, modded 6 OG xboxs with 2tb HDDs and all the games for me and the boys! Now it's time for the 360!
Hi, man! Nice and well explained video, as always! Can I just give you a couple of tips? 1. Easiest way to tell a Trinity from the rest is the fact that it has a HANA chip, no need to look at the rest of the stuff. 2. After writing the ECC you can desolder the nand wires and instead, put rawflash v4 on a USB flash drive and use that to flash the nand via xell. Cheers! ;)
Thanks! I prefer writing back my updflash.bin via hardware as I have encountered some issues with Xell/Rawflash not handing bad block remapping in the same way that Jrunner does and I prefer the way that Jrunner handles it and remaps them before writing back via hardware.
That's interesting. I often use rawflash and I've never had an issue with bad blocks. I even did a jasper rgh1.2 last week, that had 2 bad blocks and rawflash v4 handled them nicely. Not saying you're wrong, though. Every console is different. Plus, you have the nand-x, that thing is fast! Might even pick one up myself.
Success! Although boot times can take upwards of a minute to glitch, typically under 30 seconds. Should I expect faster boot times? I'd like to try and tweak it. If I've read correctly, the wire length on the bottom of the mobo can be changed to help. My console/kit were identical to what was used in this video.
so chip wise, all i need is X360 Ace V3 board and J-R Programmer V2 board? so are these two the only boards i require to RGH an xbox 360? please let me know...
This particular video is for a Trinity motherboard console - specifically for a Trinity yes an Ace V3 and JRP would do the job. Other console types require other tools.
alright so i just bought a nand progammer chip flasher blah blah haha , do i get the pin cable with it ? as there is a photo of it with the product , if not where can i get it from as i cant find it on your site ?? please respond !
+TheWeekendModder i have a question that im sure other people might want to know. where did you get the nan/nandex ced colored wires thats the only thing i cant find. thanks and awesome video
Those of you that are getting the ace v3 chip the point headers are pretty useless and its just a pain finding the right connectors. What I did was soldered wires on the pins on the back of the Jr Programmer to the ace v3. What I didn't know is that you can have the program points soldered to the programmer while testing timing files. Just make sure you unplug the Jr Programmer from the pc
+ShadowModding360 check out my latest video it has a pretty neat solution where you use a pin header so that you can plug and play flashing the ace chips
+TheWeekendModder I think I was just stressing it too much. I ordered a 6 pin header from california on eBay and it got here in about 3 days. I'm in Ohio Fits both the ace and nand cable perfectly.
Thought to mention: At 1:15 in the video, you're pointing at something that isn't visible due to the caption and the caption is really hard to exit out of because it's right next to the branding logo at the bottom right. :P
Fair point, I'm only pointing out the small little cable that is used to attach from the motherboard to the speaker for the special edition type sounds. Easy enough to pick out.
hey man I need to know what type of tape that is.. I know you said it's electric tape but when I went on Amazon I didn't find the ones you are using. mind telling me what they are called? or maybe an Amazon link would be better (:
Liked and sub'd Wow man you are a bad ass. I cam across your vid looking for a fan mod. My lil ones 360slim isn't really cooling well. Im thankful we have altex here and im able to purchase different fans for the console. I know how to solder and so on when it comes to circuit boards and other electronic work ive done. Im really interested in the jailbreak mods for the slim? Ive always heard about gamin mods and phone mods and so on but never really looked into it, im not much of a gamer anymore. Where is a trusted site to purchase these chips? And how do i know if my lil ones xbox is a trinity or other? Thank you for your time
i tried to follow this and up to the point where you put in the timing files and i tried to boot it but nothing happened on screen but the chip flashed and the fan spun up
not planning on mod ding this year (because I saving for a gaming rig) but you gained a sub you had described it really well but one question do you know a trusted source where I can buy these that ship to the us and how much do these mod ding chips go for?
Soldering where I demonstrate here has proven to be a better booting method - however yes there are alternate locations on the back if the resistor is too small for your comfort.
@30:05 what program are you using to display video from your xbox 360 onto your desktop display without having to change the input setting on the monitor?
I noticed that you soldered the D point on the front of the board, rather than the back which i have seen in various other guides. Is there any reason, is it better for boot times?
Thanks for the video, you made it look a lot easier than when I read the procedure somewhere else. I'm new to the stuff on xbox360, my question is what parts/ kits do I need to hack/mod the xbox360 an where do I buy them ? the Xbox I have is the slim trinity version.
My console does not boot after having done all the steps in the video, also check the glitch welds comparing them with the video and it still does not boot. What can I do in this case?
The ace v3 comes default programmed (from the factory) with a timing file for Corona consoles. If you want to use an ace in any other type of install you must re-program it with timing files for that.
can you make a list of everything required as every link you recommended on old videos is not available anymore would be greatly appreciated mate cheers.
Also, if you want to be able to know which exact motherboard you have WITHOUT opening your Xbox quite just yet, you can tell because if you look at the biggest sticker on the back, in the "super fine print" there should say either 12V===10.83A or 12V===9.86A heres the link to the subreddit post: www.reddit.com/r/xbox360/comments/c9f5os/how_to_identify_your_xbox_360s_motherboard_type/
Just FYI - around the transition dates of 7/2011 or so I have seen many mislabeled Corona's that have a sticker on them that says 10.83A but is in fact a Corona.
@TheWeekendModder i have a question can i pre install the ace v3 before i read the nand with jr proggrammer i would like to pre install the ace while i wait for my jr programmer to arrive or would that cause problems reading nand if so can i just desolder the power to the ace then read it or does it have no affect at all and i can pre install
Can someone please help me out!? I'm a first time programmer & have almost no experience with anything in this video other than disassembling my Xbox for maintenance & a little bit of soldering, so I was confused to see that my motherboard was slightly but still noticeably different to his despite both of ours being trinity boards. For example, the speaker that makes the "ding" startup sound that he mentioned isn't located on the frame of the Xbox & connected to the motherboard with a wire like his, instead, it is completely replaced by a black cylinder (which i assume is just an improved version of the same speaker) connected directly to the motherboard. Small differences like that may or may not mean that my board actually isn't a trinity, or more likely, in my opinion, that my Xbox is a later model of some sort, although still a 360 Slim, it may have been slightly modified to keep people from RGH-ing their consoles? If anyone can help me specifically identify my console, tell me if it would effect the process of RGH-ing it in any way, & if so, what I would need to do in order to RGH my console, without breaking it, it would help me so much. & if you need more info on the motherboard, just reply & I'll answer any questions as best as I can. Thanks.
there is an issue with my xbox 360 jtag few games such as gta v and cod ghosts , modern warfare run when i plug in usb and external my hard drive , internal hard doesnot support these games , plz tell me whats the issue and how to solve ?
J'en ai qu'un, mais j'habite en Irak, mais en Irak, il n'y a pas de disques originaux, seulement des disques copiés. Normalement, cela fonctionne sur des disques copiés. Comment télécharger des jeux dans l'appareil ? Est-il possible d'avoir une réponse ?
I have a few questions. Where to find the chips? Are there any chips that won't work? And how do I Learn where to put which wire where? Lol I'm going to do this as a part time thing.
You can buy chips all over including at my store www.store.weekendmodder.com. The particular chips you use vary depending on the console you're trying to mod. Generally right now my favorites are Matrix V1 or CoolRunner Rev C on all phats and on Trinities and Ace V3's on Corona consoles. You can find video tutorials at www.weekendmodder.com broken down for each motherboard type. Good luck - read up!
from 30:08 to the end I was lost. I am a noob and don't know how to do those last steps. I was able to keep up all of the way up until the end though. It was a nice and well thought out tutorial, it is just at the end I got a little lost.
Yo Weekend modder please answer this question ASAP!! Is there a alternative point for D on the back of the trinity motherboard for the ace v3? The point is FT4R2. Please let me know!!
Yea, the FT11 (something like that I'm doing this from memory) is referenced in many Corona tutorials but it exists on Trinities too and is an alt point for the CPU_RST (D) point
www.google.com/search?q=trinity+rgh+ace+v3+install&biw=1116&bih=570&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjI-6TH04_OAhWCTCYKHY_aBUcQ_AUIBigB#imgdii=2Wd89rRp4Cjw0M%3A%3B2Wd89rRp4Cjw0M%3A%3BhAoAyTqy6WJWEM%3A&imgrc=2Wd89rRp4Cjw0M%3A Would that be the ALT Point for D on a Trinity with ace v3?
Awesome thanks! One more question, can i change the timing files on a CR or Ace chip after i write the nand? Or can i only change the timing files before i create xebuild?
I hate how people are like... ill get an rgh, ill have a mod menu. And they dont realize the other additional processes are needed to do such things. They just want a mod menu, fuck go on TTG.
I need help finding everything I need like the Nand-X the connecting cable and I found the ace v3. Help me get everything I need to do this so I don't buy the wrong things thanks!
Is there a easy way to mod a console? Phat or slim? Are there any perks to RGH over a jtagg? And if I use your jasper RGH tutorial it will work fine with any jasper console correct? What if it's not a jasper?
+Zachary Bienstock most ways are the same,some take less time but arent as good as the longer time ones,i would say slim is easier to mod over phat because the motherboard is not as complex and as difficult as a phat. On the RGH there is no re-boot neccasary to run unasigned code. RGH can be done to any console on any dashboard,however jtag is only on 7371 dashboard which is a lot more rare to be found now that xbox patched it i believe,if you use the tutorial it should work no promises but you must be very careful on this one,if its not a jasper then it will change probaly unless the motherboards are the same type probaly not but yeah. So there you go,anyone feel free to correct me or add anything else
First, ensure the console still boots retail. There are topside via's that carry the post signal, but if you damaged the normal point I'd avoid using that alternate point as it's much more fragile than the normal point.
Hi there, i've been following your tutorial step by step, thing is that at the end, console switch on, front led blinks green, on the ACE the red light is on, the gran blinks but it won't start, any suggestion? I've tried your suggested timing on this video and the one on the other video where the full pack of file is. thanks
Thanks for the reply, I bought it from an Italian reseller, just back home I was wondering if it could be caused by a bad soldering, I just disconnect the D pad to test and it does the same thing, so what do you think, could be the D o C pad? update: as a test one by one I disconnected the pads, no 5v and end ok the ACE doesn't light up, when I disconnect the C pad, the green light is on but no blinking, removing any of the other it does blink but no boot. update2: Mr TheWeekwndModder you'r first thought was the correct one!!! :) after all these testing, and since I have another X360ace v3 I gave it a try, since the programming I saw something different, in fact with this new one, while programming, the green led was low, when finished it was quite bright, while the first chip , after programming, no green led was visible, anyhow, did set this new one in the console and id did glitch and boot, now writing NAND, hope all goes fine lol thanks
can you help me to flash a trinity whit a x360 run? i couldnt get xell when i write ecc i get red ligh nothing comes on screen until i desolder the glich chip and flash retail nand =/
If some of it is tooken apart can i send it in with the pieces. Or can i send it without and then put it together my self. Or do you do i have to put it together and send it. I have tooken apart.
mannnn this is to confusing for someone like me. I would love to use a rgh but its way to confusing for someone like me. think my best chances are to stick to horizon or buy a Xbox with everything set up already
Hey +TheWeekendModder A Long Time Ago I Got My Xbox 360 Modded To Play Burnt Games And A While Back It Doesnt Read/Play Any Burnt Games Now Why Is That
so this was uploaded a few years ago but do you have to use a arcade xbox 360? and by arcade i mean the type with the external hardrive that could get rrod
How can I visit site, that no exist?
You are right, teamx360.co.uk shut down - you can get the timing files in my jrunner package linked on this video: ruclips.net/video/qKJBLxJaYWg/видео.html
Oh, thank you bro. But I have a question:
Does ace v3 is usable in rgh 1.2 installation? I saw many videos of installation but cant find 1.2 timing files for ace v3.
Danail Uvarov I think all timing files are in Weekend Modder's timing file
TheWeekendModder Could I use this same method but use the jr programmer instead of the x nand or do I have to use the matrix glitcher chip if I use the jr runner
So generous of you to share these techniques with everyone man! :)
For those poeple who want to identify their boards almost ALL the time this is TRUE 12v-9a= corona 12v-10a=trinity
Like so people can see.
+DarkThunder _ When you get near the transition dates those power values are frequently wrong.
Yes that's correct. It's crazy though because out of all the xbox's i have got only 1 has been incorrect. I'm pretty sure it's just luck.
Yea... It's a trinity
I got 12v 10.85A and I have the module for the 4GB memory. What model is that?
Trinity
About to RGH my first console, this tutorial was perfect & has inspired a lot of confidence in me, especially with how daunting this stuff initially sounds. Subscribed!
How did it go? Was this tutorial still accurate?
@@shatterpointgames following aswell! Let me know!
@@Austin-qg2sv I did it! It worked! Be sure to join the discord server for Xbox 360 modding. I Don't have the link off hand but you can find it on Google.
@@shatterpointgames sickkkk thanks for the reply, I just simmered down on my OG xbox modding addiction, modded 6 OG xboxs with 2tb HDDs and all the games for me and the boys! Now it's time for the 360!
I Absolutely Love all of your RGH tutorials, I always have your videos playing just in case while im rghing consoles
i spend a lot of time trying to get a glitch in my trinity console, then i saw the video, you saved my live, thank you very much bro!
You're welcome
Hi, man! Nice and well explained video, as always! Can I just give you a couple of tips?
1. Easiest way to tell a Trinity from the rest is the fact that it has a HANA chip, no need to look at the rest of the stuff.
2. After writing the ECC you can desolder the nand wires and instead, put rawflash v4 on a USB flash drive and use that to flash the nand via xell.
Cheers! ;)
Thanks! I prefer writing back my updflash.bin via hardware as I have encountered some issues with Xell/Rawflash not handing bad block remapping in the same way that Jrunner does and I prefer the way that Jrunner handles it and remaps them before writing back via hardware.
That's interesting. I often use rawflash and I've never had an issue with bad blocks. I even did a jasper rgh1.2 last week, that had 2 bad blocks and rawflash v4 handled them nicely.
Not saying you're wrong, though. Every console is different. Plus, you have the nand-x, that thing is fast! Might even pick one up myself.
This actually looks fairly easy
Looks can deceive... Lol
i dont know why but this is soothing to watch.
Thanks for another great video. And big thanks for sharing the timing files. Every timing files in there for all consoles
Link to timing files please? ;)
TheWeekendModder how do I know what websites to download from so I don't get viruses on my computer?
Great video! I'm excited to do this. Just ordered a coolrunner and 3 Ace chips from your website.
Thanks for the order!
Success! Although boot times can take upwards of a minute to glitch, typically under 30 seconds. Should I expect faster boot times? I'd like to try and tweak it. If I've read correctly, the wire length on the bottom of the mobo can be changed to help. My console/kit were identical to what was used in this video.
The length and routing of wire "D" CPU_RST makes the most difference.
Thanks for the video man keep up the good work.
How did you get the output from the 360 to show up on your monitor? That's very neat and useful. Was it something with a capture card or something?
so chip wise, all i need is X360 Ace V3 board and J-R Programmer V2 board? so are these two the only boards i require to RGH an xbox 360? please let me know...
This particular video is for a Trinity motherboard console - specifically for a Trinity yes an Ace V3 and JRP would do the job. Other console types require other tools.
alright so i just bought a nand progammer chip flasher blah blah haha , do i get the pin cable with it ? as there is a photo of it with the product , if not where can i get it from as i cant find it on your site ?? please respond !
It's just a standard bit of pin header, you can buy it anywhere.
+TheWeekendModder i have a question that im sure other people might want to know. where did you get the nan/nandex ced colored wires thats the only thing i cant find. thanks and awesome video
What is the difference from an ace v3 and ace v2? Or a cr4?
Those of you that are getting the ace v3 chip the point headers are pretty useless and its just a pain finding the right connectors. What I did was soldered wires on the pins on the back of the Jr Programmer to the ace v3. What I didn't know is that you can have the program points soldered to the programmer while testing timing files. Just make sure you unplug the Jr Programmer from the pc
+ShadowModding360 check out my latest video it has a pretty neat solution where you use a pin header so that you can plug and play flashing the ace chips
+TheWeekendModder I think I was just stressing it too much. I ordered a 6 pin header from california on eBay and it got here in about 3 days. I'm in Ohio
Fits both the ace and nand cable perfectly.
Thought to mention: At 1:15 in the video, you're pointing at something that isn't visible due to the caption and the caption is really hard to exit out of because it's right next to the branding logo at the bottom right. :P
Fair point, I'm only pointing out the small little cable that is used to attach from the motherboard to the speaker for the special edition type sounds. Easy enough to pick out.
I commented while watching the video and so after you pointed it out you explained what it was and I realised that it didn't really matter. :P
hey man I need to know what type of tape that is.. I know you said it's electric tape but when I went on Amazon I didn't find the ones you are using. mind telling me what they are called? or maybe an Amazon link would be better (:
Liked and sub'd
Wow man you are a bad ass. I cam across your vid looking for a fan mod. My lil ones 360slim isn't really cooling well. Im thankful we have altex here and im able to purchase different fans for the console. I know how to solder and so on when it comes to circuit boards and other electronic work ive done. Im really interested in the jailbreak mods for the slim? Ive always heard about gamin mods and phone mods and so on but never really looked into it, im not much of a gamer anymore. Where is a trusted site to purchase these chips? And how do i know if my lil ones xbox is a trinity or other? Thank you for your time
weekendmodder.com/start_here.html
TheWeekendModder thank you!
i tried to follow this and up to the point where you put in the timing files and i tried to boot it but nothing happened on screen but the chip flashed and the fan spun up
i finally figured it out. what you have to do is use the 150mhz instead of 300 when you program the chip
Im going to be on your channel very often very soon😂😅
Great tutorial dude. When I get Ace V3 and JR Programmer definitely gonna watch this tut for when I RGH my Trinity. Thanks a lot man
Can you program the ace v3 with a nand-x, if yes do I solder the wires the same colour as in the video?
Instead of using the nand flasher to connect to the ace v3, can I solder my Nand-x to the ace v3
use bluetack to hold a wire in place and then you can easily bend it into position ready for soldering :)
Can u do a video for a corona install with the ace v3
Is there a video for doing all of that stuff after the Xbox successfully turns on?
not planning on mod ding this year (because I saving for a gaming rig) but you gained a sub you had described it really well but one question do you know a trusted source where I can buy these that ship to the us and how much do these mod ding chips go for?
store.weekendmodder.com
Wicked video man - thanks
+Def Head Thanks!
At the end you said thats the hard part. so how do i do the easy part?
what will happen if you don't put in the trinity speed up files and just leave it with the corona files?????
It won't boot.
For letter D on the glitch chip isn't there another point on the back that you can solder to or is soldering the resistor better?
?
Soldering where I demonstrate here has proven to be a better booting method - however yes there are alternate locations on the back if the resistor is too small for your comfort.
@30:05 what program are you using to display video from your xbox 360 onto your desktop display without having to change the input setting on the monitor?
+gasper1704 Picture in Picture.
I noticed that you soldered the D point on the front of the board, rather than the back which i have seen in various other guides. Is there any reason, is it better for boot times?
Thanks for the video, you made it look a lot easier than when I read the procedure somewhere else. I'm new to the stuff on xbox360, my question is what parts/ kits do I need to hack/mod the xbox360 an where do I buy them ? the Xbox I have is the slim trinity version.
For a Trinity I'd reccommend an Ace V3, and then some tool to allow you to read/write the nand. That could be a JR Programmer, nandx, or other.
on the ace chip when i boot the green light on the chip quickly blinks then turns off then quickly builds then turns off etc
Can I use a jr programmer to read the nand and program the ace v3?
You are a really bad listener.
Hey, quick question, why do you solder to the resistor and not to point C5R11? Isn't that a much easier point to solder to?
Consistently better boot performance using the point I use.
Do you happen to know what the name of that point is? is it labeled?
R4D4
Dude. Thank you SO much!
+demonslayer9101 You're welcome!
My console does not boot after having done all the steps in the video, also check the glitch welds comparing them with the video and it still does not boot. What can I do in this case?
hi so i followed this to the T and my soldering is clean .. My xbox now had an instant solid red dot. I dont understand why could you please help me
Great job man
Can you use the timing files from the ace v3 that's already programmed to your trinity???
The ace v3 comes default programmed (from the factory) with a timing file for Corona consoles. If you want to use an ace in any other type of install you must re-program it with timing files for that.
Where do you get that wire thing u solder to the motherboard? the colour coded wires? Any direct links to buy be great thanks! P.s or just the name.
can you make a list of everything required as every link you recommended on old videos is not available anymore would be greatly appreciated mate cheers.
Also, if you want to be able to know which exact motherboard you have WITHOUT opening your Xbox quite just yet, you can tell because if you look at the biggest sticker on the back, in the "super fine print" there should say either 12V===10.83A or 12V===9.86A
heres the link to the subreddit post:
www.reddit.com/r/xbox360/comments/c9f5os/how_to_identify_your_xbox_360s_motherboard_type/
Just FYI - around the transition dates of 7/2011 or so I have seen many mislabeled Corona's that have a sticker on them that says 10.83A but is in fact a Corona.
@@TheWeekendModder nice to know, also yeah that does suck :/ thanks for the tip
so if by chance if the soldier pad the "C" goes to on the underside gets taken off is the board no good? or can it be fixed?
So when your soldering the solder is the soldering iron touching the board or right above it so the solder gets on there? I dont want to break nothing
@TheWeekendModder i have a question can i pre install the ace v3 before i read the nand with jr proggrammer i would like to pre install the ace while i wait for my jr programmer to arrive or would that cause problems reading nand if so can i just desolder the power to the ace then read it or does it have no affect at all and i can pre install
You could preinstall it - but you'll likely need to leave the power disconnected for it to still boot retail.
that's what I was thinking I already pre installed it along with a led mod and case mod
good work with the tutorials they are very helpful
Can someone please help me out!?
I'm a first time programmer & have almost no experience with anything in this video other than disassembling my Xbox for maintenance & a little bit of soldering, so I was confused to see that my motherboard was slightly but still noticeably different to his despite both of ours being trinity boards. For example, the speaker that makes the "ding" startup sound that he mentioned isn't located on the frame of the Xbox & connected to the motherboard with a wire like his, instead, it is completely replaced by a black cylinder (which i assume is just an improved version of the same speaker) connected directly to the motherboard. Small differences like that may or may not mean that my board actually isn't a trinity, or more likely, in my opinion, that my Xbox is a later model of some sort, although still a 360 Slim, it may have been slightly modified to keep people from RGH-ing their consoles? If anyone can help me specifically identify my console, tell me if it would effect the process of RGH-ing it in any way, & if so, what I would need to do in order to RGH my console, without breaking it, it would help me so much. & if you need more info on the motherboard, just reply & I'll answer any questions as best as I can. Thanks.
+Kevin O' Brien Just post a full frontal pic (post it to imgur and then put the link in a comment) and I'll tell you 100% what board it is.
Can V2 works with this tutorial?
is there a link to use that i can download Jrunner from trying to RGH a console right now
ruclips.net/video/qKJBLxJaYWg/видео.html
Do you have a video on what to do after the xell menu pops up for the trinity?
you should have put the propack of timing files into the download spot
there is an issue with my xbox 360 jtag few games such as gta v and cod ghosts , modern warfare run when i plug in usb and external my hard drive , internal hard doesnot support these games , plz tell me whats the issue and how to solve ?
J'en ai qu'un, mais j'habite en Irak, mais en Irak, il n'y a pas de disques originaux, seulement des disques copiés. Normalement, cela fonctionne sur des disques copiés. Comment télécharger des jeux dans l'appareil ? Est-il possible d'avoir une réponse ?
great video btw
I have a few questions. Where to find the chips? Are there any chips that won't work? And how do I Learn where to put which wire where? Lol I'm going to do this as a part time thing.
You can buy chips all over including at my store www.store.weekendmodder.com. The particular chips you use vary depending on the console you're trying to mod. Generally right now my favorites are Matrix V1 or CoolRunner Rev C on all phats and on Trinities and Ace V3's on Corona consoles. You can find video tutorials at www.weekendmodder.com broken down for each motherboard type.
Good luck - read up!
from 30:08 to the end I was lost. I am a noob and don't know how to do those last steps. I was able to keep up all of the way up until the end though. It was a nice and well thought out tutorial, it is just at the end I got a little lost.
I do have a console in for JTAG service on my shelf, maybe I'll do an updated video.
alright that would be great. Thanks by the way for the tutorial. I like the quality content that you upload to your channel.
What would be the best chip/chips to mod a trinity with?
Do you have any consoles for sale just now and do you ship to the UK?
Yes and yes. www.premodded.weekendmodder.com
What do I need to RGH a corona console? And where do I buy all the parts? Thank you.
what gauge rosin core are you using to solder the points?
Lmao I already have a RGH but I'm trynna RGH my retail lol
RiiZe haha yeah same bro
Yo Weekend modder please answer this question ASAP!! Is there a alternative point for D on the back of the trinity motherboard for the ace v3? The point is FT4R2. Please let me know!!
Yea, the FT11 (something like that I'm doing this from memory) is referenced in many Corona tutorials but it exists on Trinities too and is an alt point for the CPU_RST (D) point
www.google.com/search?q=trinity+rgh+ace+v3+install&biw=1116&bih=570&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjI-6TH04_OAhWCTCYKHY_aBUcQ_AUIBigB#imgdii=2Wd89rRp4Cjw0M%3A%3B2Wd89rRp4Cjw0M%3A%3BhAoAyTqy6WJWEM%3A&imgrc=2Wd89rRp4Cjw0M%3A
Would that be the ALT Point for D on a Trinity with ace v3?
@theweekendmodder
Yes, though you'll have to play with the wire length to get good boot times.
Awesome thanks! One more question, can i change the timing files on a CR or Ace chip after i write the nand? Or can i only change the timing files before i create xebuild?
dear sir my jtag chip stop glitching I put my fan wire on harddisk power jack than it's stop glitch and no display plz help my chip is ace v3
If i open Jrunner and it says "connection error" in the black box then closes the program, would that be a soldering problem?
Never seen that before. Does it still close like that with nothing attached to the PC?
Can I buy a pre rgh or jtagged Xbox from you
www.premodded.weekendmodder.com
Thinking about doing this myself, are these tutorials still relevant to follow today for trinity and ace v3?
Yup!
@TheWeekendModder do you have a parts list?
I hate how people are like... ill get an rgh, ill have a mod menu. And they dont realize the other additional processes are needed to do such things. They just want a mod menu, fuck go on TTG.
I mean its pretty easy. and whats so bad about having a mod menu?
I need help finding everything I need like the Nand-X the connecting cable and I found the ace v3. Help me get everything I need to do this so I don't buy the wrong things thanks!
Is there a easy way to mod a console? Phat or slim? Are there any perks to RGH over a jtagg? And if I use your jasper RGH tutorial it will work fine with any jasper console correct? What if it's not a jasper?
+Zachary Bienstock you as ka lot of questions lol but i can answer them for you
+Zachary Bienstock most ways are the same,some take less time but arent as good as the longer time ones,i would say slim is easier to mod over phat because the motherboard is not as complex and as difficult as a phat. On the RGH there is no re-boot neccasary to run unasigned code. RGH can be done to any console on any dashboard,however jtag is only on 7371 dashboard which is a lot more rare to be found now that xbox patched it i believe,if you use the tutorial it should work no promises but you must be very careful on this one,if its not a jasper then it will change probaly unless the motherboards are the same type probaly not but yeah. So there you go,anyone feel free to correct me or add anything else
thank you för your Tutorial
My solder pad came of how do I fix it
It is unfixable
Wich resistors you are using ohm ? to no damage console 100 ohm or 10 ohm
I screwed up the C post point on the trinity motherboard, is there any alternative point to soder it too?
First, ensure the console still boots retail.
There are topside via's that carry the post signal, but if you damaged the normal point I'd avoid using that alternate point as it's much more fragile than the normal point.
Thanks! It did. I ended up just buying a Corona post fix adapter for the trinity since its compatible and it glitched instantly. Thanks for the help!
What would I need to programme a ace v3 with a jr programmer v2 please
Just the cable to connect from the JRP to the CR.
Hi there, i've been following your tutorial step by step, thing is that at the end, console switch on, front led blinks green, on the ACE the red light is on, the gran blinks but it won't start, any suggestion? I've tried your suggested timing on this video and the one on the other video where the full pack of file is. thanks
Where did you get your Ace chip? There was a bad batch circulating around that when reprogrammed for Trinities didn't work correctly.
Thanks for the reply, I bought it from an Italian reseller, just back home I was wondering if it could be caused by a bad soldering, I just disconnect the D pad to test and it does the same thing, so what do you think, could be the D o C pad?
update: as a test one by one I disconnected the pads, no 5v and end ok the ACE doesn't light up, when I disconnect the C pad, the green light is on but no blinking, removing any of the other it does blink but no boot.
update2: Mr TheWeekwndModder you'r first thought was the correct one!!! :) after all these testing, and since I have another X360ace v3 I gave it a try, since the programming I saw something different, in fact with this new one, while programming, the green led was low, when finished it was quite bright, while the first chip , after programming, no green led was visible, anyhow, did set this new one in the console and id did glitch and boot, now writing NAND, hope all goes fine lol
thanks
can you help me to flash a trinity whit a x360 run? i couldnt get xell when i write ecc i get red ligh nothing comes on screen until i desolder the glich chip and flash retail nand =/
hello there on a trinity 17559 cb 9231 ace v5 chip is necessary to programing the chip or not?
whats better a nand-x or a Jr Programmer
Nand-X are faster, an in my experience more reliable.
If some of it is tooken apart can i send it in with the pieces. Or can i send it without and then put it together my self. Or do you do i have to put it together and send it. I have tooken apart.
It makes no difference to me.
ok.
How do I get a hold of you
weekendmodder@gmail.com is my preferred method.
What size soldering iron tip is used?
when i open jrunner it says ''checking files , connection error" how do i fix this bro ?
You don't - it's a totally normal error. The Jrunner servers have been down for years.
What temp do you use for the soldering iron?
Hello! Pls tell what AWG-size was used? 30?
mannnn this is to confusing for someone like me. I would love to use a rgh but its way to confusing for someone like me. think my best chances are to stick to horizon or buy a Xbox with everything set up already
i use x360Run chip (4$) it dose not need to program and i use Matrix nand flasher (4$) and its works for the slim
Sir do you still recommend this method today?
I followed the steps but my xbox will like turn on but it wont load xell
Hey +TheWeekendModder A Long Time Ago I Got My Xbox 360 Modded To Play Burnt Games And A While Back It Doesnt Read/Play Any Burnt Games Now Why Is That
hey. if i followed this video step by step could i rgh it like does it still work ? ive seen u rgh trinitys in many diffrent ways
Yes, this method is 100% still working today.
Hey when i have the ace v3 plugged into the jr programmer the jr programmer goes from green to red. Do you know why that is?
+Cole Weedon the jrps are flakey by nature. That's why I prefer the nand x so much
so this was uploaded a few years ago but do you have to use a arcade xbox 360? and by arcade i mean the type with the external hardrive that could get rrod
No, there are RGH methods available for pretty much all motherboard variants - not just the arcade.
do you need a nand x everytime?